图书馆订购 Guest
主页 旧刊 有关人员 未来大会 American Society of Thermal and Fluids Engineering
Second Thermal and Fluids Engineering  Conference

ISSN: 2379-1748

NUMERICAL SIMULATION of FULL FLOW AND HEAT TRANSFER PROCESSES AND POST-DRYOUT MIST FLOW REGION in ONCETHROUGH STEAM GENERATORS

Jianxin Shi
Harbin Engineering University, 145 Nantong Street, Nangang District, Harbin 150001, China

Baozhi Sun


Yingjie Zhao
Harbin Engineering University, 145 Nantong Street, Nangang District, Harbin 150001, China

Xiang Yu
Harbin Engineering University

Shanghua Liu
Harbin Engineering University, 145 Nantong Street, Nangang District, Harbin 150001, China

Linlin Zhang
Harbin Engineering University, 145 Nantong Street, Nangang District, Harbin 150001, China

DOI: 10.1615/TFEC2017.mst.017579
pages 2791-2797

摘要

The once-through steam generator designed by Babcock & Wilcox is used as the prototype. The two-fluid three-flow- field mathematical model is introduced and the wall heat transfer conditions are re-partitioned in present work. The model is used to calculate the flow and heat transfer involving the single-phase subcooled water region, nucleate boiling region, dryout phenomenon, post-dryout region, and single-phase superheated steam region, i.e., the "full range" of the process. The results show that the proposed model can accurately predict fullrange thermal-hydraulic characteristics and post-dryout deviation from thermodynamic equilibrium. The heat transfer type in the nucleate boiling region was mainly evaporation heat transfer and accompanied with liquid heat convection and quenching heat transfer. Furthermore, the heat transfer coefficient decreased and the wall temperature rose sharply at the dryout position with the heat transfer type turning into steam heat convection in the post-dryout region. Investigation of the level of deviation from thermodynamic equilibrium in the postdryout region was conducted by defining a new parameter post-dl, with the results showing that the level of deviation decreased gradually with the development of flow and heat transfer in the post-dryout region, and the average deviation was about 42% when the once-through steam generator ran at full load.

Purchase $20.00 Check subscription 发布道德准则和不当行为 推荐给我的图书馆员 此页放入书签