图书馆订购 Guest
主页 旧刊 有关人员 未来大会 American Society of Thermal and Fluids Engineering
Second Thermal and Fluids Engineering  Conference

ISSN: 2379-1748
ISBN: 978-1-56700-430-4

Numerical and Experimental Study on Heat Transfer Characteristic and Thermal Load near refrigerating gasket of a Frost-free Refrigerator

Qi Chen
State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an, China

Gang Yan
Xi'an Jiao Tong University, No.28, Xianning West Road, Xi'an 710049, China

Zhaolei Sun
Xi'an Jiao Tong University, No.28, Xianning West Road, Xi'an 710049, China

摘要

The present study has been carried out to analyze the gaskets heat transfer characteristics near the refrigerating gasket region of a domestic frost-free refrigerator/freezer. A 3D numerical model was developed to evaluate the gasket heat transfer load. Experiments were also conducted to validate the results predicted by simulations. The calculated temperatures showed acceptable agreement with the measured temperatures. The results show that the anti-sweat condenser tubes have a significant influence on the temperature contour in the operating status of compressor. The total thermal load of refrigerating gasket region is 5.14 /2.95 W, in the status of compressor on/off. Thermal load of cold-bridge accounts for 19.8%/20.6% of the total thermal load. Considering the effect of compressor on/off cycle times, total thermal load of refrigerating gasket is 4.49 W during an on-off cycling operation of compressor, accounting for 15.12% of the total thermal load in the fresh food cabinet. On the basis of the heat transfer analysis, certain modifications are suggested to improve the gaskets thermal load.

Purchase $20.00 Check subscription 出版道德规范 推荐给我的图书馆员 此页放入书签