Library Subscription: Guest

ISSN Online: 2379-1748

ISBN Flash Drive: 978-1-56700-483-0

ISBN Online: 978-1-56700-482-3

4th Thermal and Fluids Engineering Conference
April, 14–17, 2019 , Las Vegas, NV, USA

EXPERIMENTAL INVESTIGATION OF SUPERCRITICAL CARBON DIOXIDE IN HORIZONTAL MICRO PIN ARRAYS WITH NON-UNIFORM HEAT FLUX BOUNDARY CONDITIONS

Get access (open in a dialog) pages 1019-1026
DOI: 10.1615/TFEC2019.fnd.027547

Abstract

This study is part of the preliminary experimental investigations designed to assess the feasibility of using supercritical carbon dioxide (sCO2) in the vicinity of its critical point for thermal management applications. In the present study, sCO2 was used as a working fluid in a diffusion bonded 316/316L stainless steel test section having staggered micro pin fin array flow passages of hydraulic diameter 679 µm (0.679 mm). The test section was subjected to a single wall non-uniform heat flux boundary condition and was operated in a horizontal orientation. The primary objective was to characterize the heat transfer performance of sCO2 as it flows through the staggered pin fin array for experimental conditions that span its critical and pseudocritical point. Data analysis methods employing 2-D and 3-D heat transfer models of the test section were used to calculate the average heat transfer coefficients for a given set of experimental conditions. Experiments were conducted by varying the inlet temperature (18 ≤ Tin ≤ 50 °C) and for fixed mass flux (300 kg m-2 s-1), heat flux (40 W cm-2), and reduced pressure (1.1). Experimental data were also compared against the predictions of a correlation proposed for single phase flows in microchannel staggered diamond pin arrays. The correlation predicted the data within 4.3 % when the ratio, TBulk/TPC exceeded 1. It was also found that the enhancement in the heat transfer, a result of employing staggered pin array flow geometry instead of microchannels, carries a commensurate penalty in pressure drop.