ライブラリ登録: Guest
ホーム アーカイブ 役員 今後の会合 American Society of Thermal and Fluids Engineering
Second Thermal and Fluids Engineering  Conference

ISSN: 2379-1748
ISBN: 978-1-56700-430-4

VISUAL EXPERIMENT ON PERFORMANCE OF R124-DMAC BUBBLE ABSORPTION PROCESS IN A VERTICAL TUBE

Mengnan Jiang
Dalian University of Technology, 2 Ling Gong Rd. Gan Jingzi District, Dalian 116024, China

Shiming Xu
Dalian University of Technology, 2 Ling Gong Rd. Gan Jingzi District, Dalian 116024, China

Xi Wu
Dalian University of Technology, 2 Ling Gong Rd. Gan Jingzi District, Dalian 116024, China

要約

A visual experiment platform for R124 (2-chloro-l,l,l,2,-tetrafluoroethane)-DMAC (N', N'- dimethylacetamide) bubble absorption process in a vertical tube absorber was designed and built. The bubble behaviors, flow pattern distributions and absorption heights in the absorber were observed and measured. The results showed that three kinds of flow patterns, churn, slug and bubble flow, could be observed under normal operation conditions. The churn flow distribution mostly occupied about 1/3 of the total absorption height, while the slug flow distribution occupied about from 0 to 1/2 of that. The bubble absorption height could be reduced by increasing the solution flow rate, or decreasing the vapor flow rate, the solution inlet temperature and the nozzle orifice diameter. In particular, the height of slug flow distribution had been proved to be a major factor that influenced the absorption height. Decreasing the solution inlet temperature and properly shrinking the nozzle orifice diameter could remarkably cut down the height of slug flow distribution, thereby reducing the absorption height.

購入する $20.00 Check subscription 出版倫理 私の図書館員へ推薦 このページをブックマークする