ライブラリ登録: Guest
ホーム アーカイブ 役員 今後の会合 American Society of Thermal and Fluids Engineering

THE EFFECTS OF COVERAGE AREA ON THE SPRAY COOLING HEAT TRANSFER PERFORMANCE

Azzam S. Salman
University of South Carolina, Columbia, SC 29208, USA

Titan C. Paul
University of South Carolina Aiken, Aiken, SC 29801, USA

Jamil A. Khan
Department of Mechanical Engineering, Laboratory for Applied Heat Transfer, University of South Carolina, Columbia, SC 29208, USA

DOI: 10.1615/TFEC2018.hte.021183
pages 1345-1353


キーワード: Spray Cooling, Nozzle Height, Heat Flux, Heat Transfer Coefficient

要約

An experimental investigation was performed to study the effects of the spray coverage area, the film area, and the impact droplet velocity on the thermal performance of a spray cooling system. All experiments were carried out in a closed loop spray cooling system working with deionized water as a cooling medium. A plain copper surface with a diameter of 15 mm was used as a target surface and tested in the single-phase and two-phase regimes. The coolant mass flux was 15.5 kg/s.m2, and the distance between the nozzle and the heated surface was varied from 10 to16 mm. Due to the change in the nozzle height, the spray coverage area, the film area, and the droplet impact velocity were changed and affected the thermal performance of the spray cooling system. As a sequence of these changes, the experimental results showed that these parameters have a significant effect on the heat transfer characteristics.

購入する $20.00 Check subscription 出版倫理および不正行為 私の図書館員へ推薦 このページをブックマークする