ライブラリ登録: Guest
ホーム アーカイブ 役員 今後の会合 American Society of Thermal and Fluids Engineering

AN EXPERIMENT STUDY ON THE STEAM JET CONDENSATION WITH DIFFERENT TYPE OF NOZZLES

Quanbin Zhao
State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China

Yuelei Cong
State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China

Daotong Chong
State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China

Fang Yuan
State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China

Weixiong Chen
State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, PR China

Junjie Yan
State Key Laboratory of Multiphase Flow in Power Engineering, School of Energy & Power Engineering, Xi'an Jiaotong University, Xi'an, 710049, P. R. of China

DOI: 10.1615/TFESC1.hte.013143
pages 1201-1211


キーワード: steam jet condensation, nozzle types, penetration length, condensation oscillation

要約

The objective of this work is to research the steam submerged jet condensation with different nozzle types. The steam jet length and condensation oscillation frequency with different nozzle types under a series of pool temperature and steam mass flux are investigated experimentally. Three types of nozzles with hole-diameter of 8 mm are tested. The result indicates that the dimensionless jet length prolongs gradually with the pool water temperature and steam mass flux increasing for all types of nozzles. And the steam jet length of straight pipe nozzle is longest and that of side-hole nozzle is shortest. Empirical correlations are obtained and for each types of nozzles. The condensation oscillation frequencies for each type of nozzles are also investigated. Condensation oscillation frequency decreases gradually with the pool water temperature and steam mass flux increasing. And the deviation of condensation oscillation frequencies among different nozzle types is small. Moreover, the expansion coefficients ratio is provided to change with the steam mass flux, water temperature and nozzle structure. With the new correlation of steam jet lengths and expansion coefficients for each type of nozzles, the oscillation frequencies for each type of nozzles is predicted, and the error is within±10%, approximately.

購入する $20.00 Check subscription 出版倫理および不正行為 私の図書館員へ推薦 このページをブックマークする