Inscrição na biblioteca: Guest
Início Arquivos Representantes Futuras reuniões American Society of Thermal and Fluids Engineering
Second Thermal and Fluids Engineering  Conference

ISSN: 2379-1748


Jianyong Chen
School of Material and Energy, Guangdong University of Technology, Guangzhou, 510006, China

Hans Havtun
Department of Energy Technology, Royal Institute of Technology (KTH), Stockholm, Sweden

Björn Palm
Royal Institute of Technology (KTH); Department of Energy Technology, Brinellvagen 60,100 44 Stockholm, Sweden

Ying Chen
Soft Matter Center, Guangdong Provincial Key Laboratory on Functional Soft Condensed Matter, School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China

DOI: 10.1615/TFEC2017.emi.017621
pages 1299-1302


The vapor ejector is the key component in the ejector refrigeration system. The ejector determines the working stability and performance of the whole system. A specific test rig was designed and built with a focus on the performance of ejector itself. Instead of a circulation pump and a generator in the ejector refrigeration system, a compressor was used as the driving source. R245fa was selected as the working fluid. The important parameters, like pressure, temperature and mass flow rate, were measured and recorded. The entrainment ratio was obtained at a maximum value of 0.28. It was found that using ideal gas law and an appropriate value of the ejector nozzle isentropic efficiency could provide reasonable predictions of the mass flow rate through the ejector nozzle. Moreover, the insignificant impact of the superheat of the secondary flow on entrainment ratio was verified.

Compra $20.00 Check subscription Ética e negligência em publicaçãoes Recomendado ao My Librarian Inserir indicador nessa página