Inscrição na biblioteca: Guest
Início Arquivos Representantes Futuras reuniões American Society of Thermal and Fluids Engineering
First Thermal and Fluids Engineering Summer Conference

ISSN: 2379-1748
ISBN: 978-1-56700-430-4


M. Assad
A.V. Luikov Heat and Mass Transfer Institute of National Academy of Sciences of Belarus, 15 P.Brovki str., 220072 Minsk, Belarus

Oleg G. Penyazkov
Laboratory of Physical-Chemical Hydrodynamics, Department of Physics and Chemistry of Nonequilibrium Media, A. V. Luikov Heat and Mass Transfer Institute, National Academy of Sciences of Belarus, Minsk, Belarus

DOI: 10.1615/TFESC1.asp.012900
pages 147-150

Palavras-chave: Liquid fuel, Deflagration-to-detonation transition, Pulsed detonation combustor


A series of experiments were performed with a liquid fuel pulsed detonation combustor that is a 20-mm dia partitioned tube equipped with a pre-chamber shaped as a hemispherical cavity with a conical duct for transition to the tube. The total length of the setup is 664 mm. A mixture is being ignited by a spark plug mounted in the closed endwall of the combustor. Fuel is being injected by the injector located in the intersection zone of hemispherical and conical parts of the pre-chamber. Analysis of large-number of working cycles with combustion of near-stoichiometric heptane/air/oxygen mixtures (φ = 1.04) revealed a variation of the wave velocity in the range 500 − 2500 m/s. The detonation was recorded at distances 140 − 640 mm from place of spark that is 7 − 32 tube diameters. It was shown that such scatter of the wave velocities and pre-detonation distances was due to a degree of thermal activation of a mixture prior to its ignition.

Compra $20.00 Check subscription Ética e negligência em publicaçãoes Recomendado ao My Librarian Inserir indicador nessa página