ライブラリ登録: Guest

ISSN Online: 2379-1748

ISBN Flash Drive: 978-1-56700-483-0

ISBN Online: 978-1-56700-482-3

4th Thermal and Fluids Engineering Conference
April, 14–17, 2019 , Las Vegas, NV, USA
Gain(open in a new tab)
Preface Scientific Advisory Committee 会議役員It's a pdf file. (open in a new tab) 目次

目次:

Advanced Energy Systems

EXERGY ANALYSIS OF THE ALUMINA NANOFLUID THROUGH A RIBBED ANNULAR CHANNEL Arash Shadlaghani, Nastaran Barhemmati-Rajab, Weihuan Zhao pages 1-7 DOI: 10.1615/TFEC2019.aes.027551
PERFORMANCE EVALUATION ON A CLOSED BRAYTON CYCLE WITH DIFFERENT WORKING FLUID Jinwei Chen, Shengnan Sun, Yao Chen, Huisheng Zhang pages 9-18 DOI: 10.1615/TFEC2019.aes.027586
THERMODYNAMIC MODELING AND ASSESSMENT OF ALLAM CYCLE UTILIZING NATURAL GAS N. S. Sifat, Yousef Haseli pages 19-32 DOI: 10.1615/TFEC2019.aes.029477
COMPARISON TECHNIQUE FOR THERMODYNAMIC PERFORMANCE OF HEAT ACTIVATED COOLING SYSTEMS Shane D. Garland, Derek N. Young, Todd M. Bandhauer pages 33-36 DOI: 10.1615/TFEC2019.aes.027594

Aerospace Applications

ASSESSING EFFECTS OF WIND ANGLE OF ATTACK ON AIRPLANE WING PRECIPITATION COLLECTION EFFICIENCY USING AIRFOIL PRESSURE PROFILES Mushrif Choudhury, JIe Cui pages 37-47 DOI: 10.1615/TFEC2019.asp.027883
DESIGNING A FLYING AMBULANCE Mohammed S. Mayeed, Landrum Parker, Patricia Bell pages 49-63 DOI: 10.1615/TFEC2019.asp.027887

Combustion, Fire, Fuel

NUMERICAL STUDY ON EXPLOSION HAZARDS OF HYDROGEN CARS IN A GARAGE Yan Huo, Chi-wing To, Chi-honn Cheng, W.K. Chow pages 65-74 DOI: 10.1615/TFEC2019.cbf.027142
Effects of Nozzle Hole Number, Spray Included Angle and Compression Ratio on Combustion Characteristics in a Heavy-Duty Engine Minhoo Choi, Sungwook Park pages 75-78 DOI: 10.1615/TFEC2019.cbf.027999
DIAGNOSTICS AND TESTING TO ASSESS THE BEHAVIOR OF ORGANIC MATERIALS AT HIGH HEAT FLUX Alexander L. Brown, Ryan R. Anderson, Anthony Tanbakuchi, Deshawn Coombs pages 79-92 DOI: 10.1615/TFEC2019.cbf.027457
APPLICATION OF ACTIVE AND PASSIVE CONTROL METHODS FOR DIFFUSION JET FLAMES Artur Tyliszczak, Agnieszka Wawrzak, Jakub Stempka pages 93-102 DOI: 10.1615/TFEC2019.cbf.027461
COMPOSITE MATERIAL COMBUSTION MODELING USING THERMALLY INTERACTING, CHEMICALLY REACTIVE LAGRANGIAN PARTICLES Flint Pierce, Alexander L. Brown, Tyler Voskuilen, Heeseok Koo pages 103-112 DOI: 10.1615/TFEC2019.cbf.027649
EFFECT OF HEAT EXTRACTION ON FLAME POSITION IN COUNTERFLOW POROUS BURNER Abhisek Banerjee, Alexei V. Saveliev pages 113-122 DOI: 10.1615/TFEC2019.cbf.027654
EFFECTS OF EXHAUST PORT PRESSURE ON PARTICULATE MATTER EMISSION AND ENGINE PERFORMANCE IN GASOLINE DIRECT INJECTION ENGINE Ziyoung Lee, Sungwook Park pages 123-125 DOI: 10.1615/TFEC2019.cbf.028115
ANALYSIS OF HOMOGENEOUS CHARGE COMPRESSION IGNITION ENGINE WITH EMPHASIS ON COMBUSTION TIMING AND REACTION RATE Arunim Bhattacharya, Pradip Majumdar pages 127-143 DOI: 10.1615/TFEC2019.cbf.027525
PYROLYSIS UNDER EXTREME HEAT FLUX CHARACTERIZED BY MASS LOSS AND THREE-DIMENSIONAL SCANS Jeffrey D. Engerer, Alexander L. Brown pages 145-160 DOI: 10.1615/TFEC2019.cbf.028030
HEAT TRANSFER CHARACTERIZATION OF A HOT CYLINDER ON AN INERT SUBSTRATE Savannah S. Wessies, Kevin C. Marr, Ofodike A. Ezekoye pages 161-166 DOI: 10.1615/TFEC2019.cbf.027612
FULLY COMPRESSIBLE COMBUSTION SIMULATION OF RCM IN HIERARCHICAL CARTESIAN MESH SYSTEM BY IMMERSED BOUNDARY METHOD Wei-Hsiang Wang, Chung-Gang Li, Makoto Tsubokura pages 167-176 DOI: 10.1615/TFEC2019.cbf.027571
A BAYESIAN METHOD FOR DETERMINING THE FIRE EVOLUTION WITHIN A COMPARTMENT Jan-Michael Cabrera, Robert D. Moser, Ofodike A. Ezekoye pages 177-184 DOI: 10.1615/TFEC2019.cbf.027611
CT (COMPUTER TOMOGRAPHY) MEASUREMENT OF 3D DENSITY DISTRIBUTIONS OF FLAME: OBTAINING VERTICAL GRADIENT SCHLIEREN BRIGHTNESS FROM HORIZONTAL GRADIENT FOR IMAGE-NOISE REDUCTION Ahmad Zaid Nazari, Yojiro Ishino, Ryoya Yamada, Takanori Motohiro, Fumiya Ito, Harumi Kondo, Yoshiaki Miyazato, Shinichiro Nakao pages 185-194 DOI: 10.1615/TFEC2019.cbf.027746
FIRE AND EXPLOSION MODELLING FOLLOWING THE ACCIDENTAL FAILURE OF HIGH PRESSURE ETHYLENE TRANSPORTATION PIPELINES Jianhao Yu, Haroun Mahgerefteh, Sergey Martynov, Tomasz Olewski, Ioannis Economou, Luc Vechot pages 195-198 DOI: 10.1615/TFEC2019.cbf.028909

Compact Heat Exchangers

POLYMERIC HOLLOW FIBER HEAT TRANSFER SURFACES FOR SHELL AND TUBE APPLICATION Miroslav Raudensky, Tereza Brozova, Erik Bartuli pages 199-204 DOI: 10.1615/TFEC2019.che.027668
NUMERICAL MODELLING AND EXPERIMENTAL STUDIES ON A WIRE MESH HEAT EXCHANGER Kumar S Sunil , M P Neeraj , Kumar S Ajay , Johns Mathews pages 205-219 DOI: 10.1615/TFEC2019.che.027989
INLET FLOW MALDISTRIBUTION EFFECT ON THREE-FLUID CROSS-FLOW HEAT EXCHANGER ARRANGEMENTS Jyothiprakash KH, Y T Krishnegowda, K. N. Seetharamu pages 221-230 DOI: 10.1615/TFEC2019.che.028439
MODEL VALIDATION FOR LARGE EVAPORITIVE PLATE FRAME HEAT EXCHNAGERS John R. Simon III, Todd M. Bandhauer pages 231-234 DOI: 10.1615/TFEC2019.che.028122
VISUALISATION OF LARGE-SCALE HEAT EXCHANGER NETWORKS TO SUPPORT ENERGY RETROFIT Timothy Walmsley, Petar S. Varbanov, Nathan Lal, Jiří J. Klemeš pages 235-238 DOI: 10.1615/TFEC2019.che.028981
Local Optimum Channel Height for Pressure Drop and Heat Transfer in the Herringbone Wavy Channel Hie-Chan Kang, Young Hyun Kang pages 239-244 DOI: 10.1615/TFEC2019.che.028512

Computational Methods/Tools in Thermal-Fluid Systems

MESHLESS SIMULATION APPROACH FOR WATER MANAGEMENT USING SMOOTHED PARTICLE HYDRODYNAMICS David Greif, Markus Ihmsen pages 245-254 DOI: 10.1615/TFEC2019.cmd.027273
BEST STARTEGY TO SIMULTANEOUSLY ESTIMATE THE THERMAL DIFFUSIVITIES OF ORTHOTROPIC COMPOSITE MEDIUM EMBEDDED IN TWO-LAYER MATERIALS Elissa El Rassy, Yann Billaud, Didier Saury pages 255-264 DOI: 10.1615/TFEC2019.cmd.027299
CFD AND THERMAL ANALYSIS IN THE INTEGRATION OF A DIVERTER VALVE TO A COMBINED CYCLE COGENERATION PLANT Manuel A. Gonzalez Chapa, R. Salgado Ayala pages 265-273 DOI: 10.1615/TFEC2019.cmd.027347
METHODOLOGY TO IMPROVE FLOW DISTRIBUTION AND DUCT BURNER COMBUSTION IN HEAT RECOVERY STEAM GENERATORS Manuel A. Gonzalez Chapa, R. Salgado Ayala pages 275-285 DOI: 10.1615/TFEC2019.cmd.027348
CFD APPROACH FOR PREDICTING ENTRAINMENT IN KETTLE REBOILERS Kevin J. Farrell pages 287-296 DOI: 10.1615/TFEC2019.cmd.027542
HEAT TRANSFER ANALYSIS OF AN IMPINGING SLOT JET ON A CONCAVE SURFACE Gérard J. Poitras, A. Babineau, Gilles C. Roy, L.-E. Brizzi pages 297-306 DOI: 10.1615/TFEC2019.cmd.027616
ELECTROWETTING-INDUCED DROPLET JUMPING SIMULATION USING MANY-BODY DISSIPATIVE PARTICLE DYNAMICS Ting Liu, Anupam Mishra, Mohsen Torabi, Ahmed A. Hemeda, James Palko, Yanbao Ma pages 307-317 DOI: 10.1615/TFEC2019.cmd.028419
EFFECT OF CEILING COOLING PANELS ON FIRE SPRINKLER RESPONSE TIME Tyler C. Buffington, Ofodike A. Ezekoye pages 319-322 DOI: 10.1615/TFEC2019.cmd.027614
NATURAL CONVECTION HEAT TRANSFER FROM TWO THIN VERTICALLY SPACED TWO-DIMENSIONAL ISOTHERMAL PLATES FOR THE CASE WHERE ONE PLATE IS HORIZONTAL AND ONE IS INCLINED Patrick H. Oosthuizen, Santiago del Rio Oliveira pages 323-330 DOI: 10.1615/TFEC2019.cmd.027671
A DIRECT COUPLING TECHNIQUE FOR NUMERICAL SIMULATIONS OF TEMPERATURE DEPENDENT PHENOMENA IN A COMPRESSIBLE GAS FLOW CONTAINING PARTICLES Laurie Florio pages 331-345 DOI: 10.1615/TFEC2019.cmd.027703
NUMERICAL STUDY OF LIQUID LEAKAGE DETECTION ATTEMPT FOR SINGLE AND PARALLEL COOLING LINES M. Parlak, M. Turan, Vedat Yagcı pages 347-356 DOI: 10.1615/TFEC2019.cmd.027733
CONTAMINANT DISPERSION VALIDATION SIMULATIONS FOR AN URBAN INSPIRED SCENARIO Alexander L. Brown, Erik Benavidez, Michael D. Clemenson, Michael J. Benson, Christopher J. Elkins pages 357-370 DOI: 10.1615/TFEC2019.cmd.027454
TOPOLOGY ENHANCEMENT OF PLATE AND FIN HEAT EXCHANGERS USING A DISCRETE POROUS MEDIA SIMULATION APPROACH Samer Wakim, Maroun Nemer, B. Zeghondy, Boutros Ghannam, C. Bouallou pages 371-380 DOI: 10.1615/TFEC2019.cmd.027254
CDF AND FEA BASED SIMULATION APPROACH FOR IMMERSION QUENCHING OF JET ENGINE FAN BLADES David Greif, Rok Kopun pages 381-386 DOI: 10.1615/TFEC2019.cmd.027270
Numerical Study on the Effect of Cross Section Profile on the Flow and Heat Transfer of Supercritical Water within a Vertically Upward Tube Shuai Zhao, Qinggang Qiu, Xiaojing Zhu, Shengqiang Shen pages 387-396 DOI: 10.1615/TFEC2019.cmd.027992
THE ROLE OF THE RADIATION DISTRIBUTION FACTOR PDF IN ASSESSING UNCERTAINTY IN THE MONTE CARLO RAY-TRACE METHOD Mehran Yarahmadi, J. Robert Mahan, Kory J. Priestley pages 397-405 DOI: 10.1615/TFEC2019.cmd.027524
NUMERICAL INVESTIGATION OF HEAT TRANSFER IN DENSE FIXED BEDS OF ARBITRARY SHAPED PARTICLES WITH IMMERSED BOUNDARY METHODS Jan Bassen, Shreyas-Rohit Srinivas, Petr Nikrityuk, Andreas Richter, Sebastian Kriebitzsch pages 407-411 DOI: 10.1615/TFEC2019.cmd.028008
NUMERICAL SIMULATIONS OF CONDENSING R134a FLOWS IN HORIZONTAL PIPES D. Juggurnath, Muhammad Zaid Dauhoo, M. K. Elahee, Abdel Khoodaruth, Jaco Dirker, Josua Petrus Meyer, Christos N. Markides pages 413-422 DOI: 10.1615/TFEC2019.cmd.028053
NUMERICAL ANALYSIS OF A TURBULENT REACTING FLAME USING COMPREHENSIVE MODELING APPROACHES: RANS, LES AND HYBRID RANS-LES Lu Chen, Wayne Strasser, Francine Battaglia pages 423-426 DOI: 10.1615/TFEC2019.cmd.028039
A STUDY ON THE TRANSIENT FLOW IN A BUOYANCY-DRIVEN WALL PLUME Ardeshir Bangian Tabrizi, Yogesh Jaluria pages 427-430 DOI: 10.1615/TFEC2019.cmd.028150
A CONSERVATIVE PHASE-FIELD LATTICE BOLTZMANN FORMULATION FOR MULTIPHASE FLOWS M. Wasy Akhtar pages 431-436 DOI: 10.1615/TFEC2019.cmd.028517
UNSTEADY WAKE CHARACTERISTICS IN FLOW PAST TWO INLINE SURFACE MOUNTED CIRCULAR CYLINDERS Prashant Kumar, Shaligram Tiwari pages 437-450 DOI: 10.1615/TFEC2019.cmd.028455
EVALUATION OF CFD ALGORITHMS FOR SOLVING A CANONICAL PROBLEM OF FLOW OVER A SQUARE CYLINDER Lauren E. Olsen, John Abraham pages 451-454 DOI: 10.1615/TFEC2019.cmd.029015
CHARACTERIZATION OF THE TEMPERATURE RESPONSE OF MIXED MATERIAL WITH DIFFERENT EMISSIVITY IN AN INTERMODAL CONTAINER Kenneth D. Blecker, Hamid Hadim pages 455-466 DOI: 10.1615/TFEC2019.cmd.027397
OPTIMIZING COMBUSTION OPERATION IN HOMOGENEOUS CHARGE COMPRESSION IGNITION ENGINE USING EXHAUST GAS RECIRCULATION: A STUDY OF VARIATION IN PRODUCT SPECIES AND RELATED PARAMETERS Malav Thakore, Pradip Majumdar pages 467-479 DOI: 10.1615/TFEC2019.cmd.027385

Education in Thermal and Fluid Engineering

THE INTEGRATION OF A POWER PLANT ANALYSIS PROJECT AS PART OF A TRAINING PERIOD AT SEA Henry P. Stewart, Mark A. Coté, Michael R. Maixner pages 481-490 DOI: 10.1615/TFEC2019.edu.026793
Undergraduate Active Learning Experience through Industrial Sponsored Capstone Projects on Thermal-Fluids Science Jiajun Xu, Devdas Shetty, Abiose Adebayo pages 491-499 DOI: 10.1615/TFEC2019.edu.027161
UNDERGRADUATE INTERNAL FLOWCONVECTION HEAT TRANSFER LABORATORY Briana Fisk, Bret P. Van Poppel, Michael J. Benson, Gunnar O. Tamm, Annie Peters, Ashley German pages 501-510 DOI: 10.1615/TFEC2019.edu.027539
EXPERIMENTAL STUDY OF A TURBULENT IMPINGING JET IN AN UNDERGRADUATE HEAT TRANSFER LABORATORY Michael J. Benson, Arnaud Ivanovsky, Mattias Cooper, Gunnar O. Tamm, David B. Helmer, Bret P. Van Poppel, Briana Fisk pages 511-521 DOI: 10.1615/TFEC2019.edu.027644
CARNOT HEAT ENGINE EFFICIENCY, EXERGY, AND EXERGY GRADE LINE (XGL) Yongjian Gu pages 523-529 DOI: 10.1615/TFEC2019.edu.029339

Electric, Magnetic, Flow and Thermal Phenomena in Micro and Nano-Scale Systems

WHISPERING-GALLERY MODE SILICA SENSORS FOR SUPERCONDUCTIVE TAPE TEMPERATURE MEASUREMENT Yihua Hao, Zhixiong Guo pages 531-538 DOI: 10.1615/TFEC2019.mns.027860

Electrochemical Energy Systems

NUMERICAL PREDICTION OF EFFECTIVE THERMAL CONDUCTIVITY OF CATALYST LAYERS IN PROTON EXCHANGE MEMBRANE FUEL CELLS Ruiyuan Zhang, Chen Li, Wenzhen Fang, Wen-Quan Tao pages 539-551 DOI: 10.1615/TFEC2019.ees.027560
IRREVERSIBILITY AND EXERGY ANALYSIS OF A RECOMPRESSION SUPERCRITICAL CO2 CYCLE COUPLED WITH DRY COOLING SYSTEM Mohammad Monjurul Ehsan, Zhiqiang Guan, Hal Gurgenci, Alexander Y. Klimenko pages 553-561 DOI: 10.1615/TFEC2019.ees.027494

Energy and Sustainability

Comparing three methods for waste natural gas-based water production: reverse osmosis, thermal desalination and atmospheric water harvesting Aritra Kar, Vaibhav Bahadur pages 563-574 DOI: 10.1615/TFEC2019.ens.027959
COMPUTER-AIDED WORKING FLUID DESIGN AND POWER SYSTEM OPTIMIZATION USING THE SAFT-γ MIE EQUATION OF STATE D. Ibrahim, Oyeniyi A. Oyewunmi, Andrew J. Haslam, Christos N. Markides pages 575-584 DOI: 10.1615/TFEC2019.ens.028111
SOLAR-POWERED CONDENSATION VACUUM TECHNOLOGY Hongling Deng, Guangyu Guo, Zhiming Ji, Chao Zhu pages 585-593 DOI: 10.1615/TFEC2019.ens.028493
An analytical model for pressure loss coefficients in tee junction of a solar collector based upon discharge ratio and Reynolds number Shahzad Yousaf, Imran Shafi, Sajid Ullah Butt, Muhammad Farooq pages 595-601 DOI: 10.1615/TFEC2019.ens.028575
TECHNOECONOMIC ANALYSIS OF TRI-GENERATION IN COMPUTER, ELECTRONICS, AND ELECTRICAL EQUIPMENT MANUFACTURING Alex M. Grauberger, Todd M. Bandhauer pages 603-606 DOI: 10.1615/TFEC2019.ens.028123

Energy-Water-Food Nexus

IMPACTS OF WATER QUALITY ON VIBRATION-INDUCED WATER DROPLET REMOVAL FOR COOLING TOWER WATER CAPTURE Ryan Huber, Nicole Doughramaji, Erica Schmitz, Stacy Hutchinson, Melanie M. Derby pages 607-616 DOI: 10.1615/TFEC2019.ewf.027533
ADVANCED EXHAUST HEAT RECOVERY BY INTEGRATION OF HEAT TRANSFER AND CONDENSATION PROCESSES Helen Skop, Maciek Baran, Erika Bim, Tracy Martinez pages 617-624 DOI: 10.1615/TFEC2019.ewf.028149
PERFORMANCE INDEX OF THE HDH DESALINATION UNIT DRIVEN BY NANOFLUID BASED SOLAR COLLECTOR Kapil Garg, Vikrant Khullar, Sarit K. Das, Himanshu Tyagi pages 625-628 DOI: 10.1615/TFEC2019.ewf.027948

Experimental Methods/Tools and Instrumentation in Fluid Mechanics and Heat/Mass Transfer

DESIGN, MANUFACTURING AND EXPERIMENTAL TESTING OF A SELF-CLEANING EXIT PORT MECHANISM FOR A SOLAR REACTOR Joppe Rutten, Jens Verschoren, Nesrin Ozalp, Cédric Ophoff, David Moens pages 629-643 DOI: 10.1615/TFEC2019.emt.028516
MEASUREMENT OF BOILING HEAT TRANSFER COEFFICIENT OF R-134A IN A CIRCULAR TUBE USING FIBER OPTIC TEMPERATURE SENSORS Ethan P. Matty, Tabeel A. Jacob, Brian M. Fronk pages 645-653 DOI: 10.1615/TFEC2019.emt.027623
THE EFFECT OF MULTIPHASE FLOW BEHAVIOUR ON A HORIZONTAL ANNULUS BY INTEGRATING HIGH-SPEED IMAGING TECHNIQUE Alap Ali Zahid, Syed Raza ur Rehman, Anwarul Hasan, Moustafa Hussein Ali, Rashid Hasan, Ibrahim Hassan, Mohammad Azizur Rahman pages 655-664 DOI: 10.1615/TFEC2019.emt.028526
DRILLING CUTTINGS TRANSPORT IN HORIZONTAL WELLS WHILE AERATED DRILLING Golam Rasul, Rashid Hasan, Ibrahim Hassan, Stephen Butt, Mohammad Azizur Rahman pages 665-671 DOI: 10.1615/TFEC2019.emt.028527
Study of pressure-drop in two phase flow based on experiment and CFD simulation Yanbo Wang, Kegang Ling, Hao Fu, Lu Yang, Sai Wang, Huirong Liang pages 673-677 DOI: 10.1615/TFEC2019.emt.027492
BOILING HEAT TRANSFER PREDICTION IN HELICAL COILS UNDER TERRESTRIAL GRAVITY WITH ARTIFICIAL NEURAL NETWORK Xing Liang, Yongqi Xie, Rodney Day, Hongwei Wu pages 679-686 DOI: 10.1615/TFEC2019.emt.028875
THERMODYNAMIC MODELING AND EXPERIMENTAL VALIDATION OF FATTY ORGANIC SYSTEMS SOLID-LIQUID EQUILIBRIUM Clément Mailhé, Marie Duquesne pages 687-696 DOI: 10.1615/TFEC2019.emt.027324
A Robust and High Resolution Method for Measuring Spatio-Temporal Convective Heat Transfer Jason K. Ostanek pages 697-707 DOI: 10.1615/TFEC2019.emt.027352
USE OF OPTICAL DISTRIBUTED TEMPERATURE SENSORS FOR CONDENSATION HEAT TRANSFER MEASUREMENTS OF R-134a IN CIRCULAR CHANNELS Tabeel A. Jacob, Ethan P. Matty, Brian M. Fronk pages 709-720 DOI: 10.1615/TFEC2019.emt.027546
THERMAL MANAGEMENT OF A RAILGUN ARMATURE USING PHASE CHANGE MATERIALS Jouffray P. Matthew, Roberts Nicholas pages 721-730 DOI: 10.1615/TFEC2019.emt.027555
CREATION OF POROUS ANATASE TIO2 FILMS USING TIO2 NANOFLUID Kazuhiro Manseki, Katsuya Hisae, Takashi Sugiura, Saeid Vafaei pages 731-735 DOI: 10.1615/TFEC2019.emt.027585
INFLUENCE OF PARTICLE SHAPE ON THE VOID FRACTION OF RANDOMLY PACKED BEDS Bassem Hallak, Eckehard Specht pages 737-746 DOI: 10.1615/TFEC2019.emt.028483

Flow Instability

LIQUID ROPE COILING WITH MULTIPLE VISCOUS JETS Majid Molki pages 747-758 DOI: 10.1615/TFEC2019.fli.027216
BIFURCATION ANALYSIS OF THE SUPER-CRITICAL CARBON DIOXIDE FLOW IN HEATED CHANNEL Munendra Pal Singh, Md Emadur Rahman, Om Singh, Suneet Singh pages 759-766 DOI: 10.1615/TFEC2019.fli.028012
SYMMETRIC AND ANTISYMMETIC CHARACTERIZATION OF TURBULENT FLOW PAST A SQUARE CYLINDER OF LOW ASPECT RATIO Fei Wang, K.M. Lam pages 767-775 DOI: 10.1615/TFEC2019.fli.028033
THE INVESTIGATION IN THE DENSITY-WAVE INSTABILITY OF A UNIFORMLY HEATED CHANNEL AT A SUPERCRITICAL PRESSURE USING A THREE-REGION NONLINEAR MODEL Jin-Der Lee, Shao-Wen Chen, Jinn-Jer Peir pages 777-786 DOI: 10.1615/TFEC2019.fli.028677

Fluid Flow and Heat Transfer in Biosystems

THE EFFECTS OF PULSATING HEAT SOURCE ON HYPERTHERMIA IN A CANCEROUS TISSUE Assunta Andreozzi, Luca Brunese, Marcello Iasiello, Claudio Tucci, Giuseppe Peter Vanoli pages 787-795 DOI: 10.1615/TFEC2019.bio.027929
ASSESSMENT OF RHEOLOGICAL PROPERTIES OF BLOOD AS A FUNCTION OF HEALTH STATUS: A NOVEL POINT OF CARE DEVICE FOR POPULATION BASED SCREENING Siddharth Singh Yadav , Basant Singh Sikarwar, Priya Ranjan, Rajiv Janardhanan pages 797-802 DOI: 10.1615/TFEC2019.bio.028010
NUMERIC STUDY OF FREEZING TO SUPPORT DEVELOPMENT OF INDIVIDUAL CELL-SCALE THERMAL ANALYZER Han Han, Gary L. Solbrekken pages 803-816 DOI: 10.1615/TFEC2019.bio.028075
Encapsulated microbubbles for contrast ultrasound imaging and drug delivery: from pressure dependent subharmonic to collapsing jet and acoustic streaming Nima Mobadersany, Kausik Sarkar pages 817-828 DOI: 10.1615/TFEC2019.bio.028506

Fluid Flow and Heat Transfer in Industrial and Commercial Processes and Material Processing

NUMERICAL STUDY OF THE SAND REMOVAL IN AN IMPACT SEPARATOR WITH PARTICLE LADEN CRUDE OIL FLOW D. Bouzada, O. F. Ayala, Orlando M. Ayala pages 829-838 DOI: 10.1615/TFEC2019.fip.028009
ADVANCES IN LIGHTWEIGHT HEAT SINKS Mohammad Reza Shaeri, Richard W. Bonner pages 839-842 DOI: 10.1615/TFEC2019.fip.027643
EXPERIMENTAL INVESTIGATION OF HEAT PIPE HEAT EXCHANGER (HPHE) FOR WASTE HEAT RECOVERY APPLICATION Sakil Hossen, AKM M. Morshed, Amitav Tikadar, Azzam S. Salman, Titan C. Paul pages 843-851 DOI: 10.1615/TFEC2019.fip.028029
TRANSIENT FEM SIMULATION OF 316L STAINLESS STEEL FABRICATED BY SELECTIVE LASER MELTING WITH DIFFERENT PROCESSING PARAMETERS. Emmanuel Duodu Amoako, Patrick Mensah, Stephen Akwaboa, Samuel Ibekwe, Guoqiang Li pages 853-859 DOI: 10.1615/TFEC2019.fip.028486
NUMERICAL OPTIMIZATION OF DRYING OF LATEX PAINT FILMS ON SOLID SUBSTRATES Priyanka Chandna, Serguei Zelepouga, Steven Richmond, Jeffrey Donelan, Alexei V. Saveliev pages 861-870 DOI: 10.1615/TFEC2019.fip.027640
SIMULATING AND MINIMIZING BACK AND BOTTOM WALL VORTICES FOR SUMP PUMPS Jesse D. East, JIe Cui pages 871-881 DOI: 10.1615/TFEC2019.fip.028049
BORON MIXING IN A REACTOR CORE AND DOWNCOMER Tae-Soon Kwon, Ki-hwan Kim, Dong-Jin Euh, Sang-Kyu Rim pages 883-892 DOI: 10.1615/TFEC2019.fip.028441

Fluid Mechanics and Rheology of Nonlinear Materials and Complex Fluids

Integration of CFD simulation and Experiment to Investigate the Soil Removal Characteristic of the Tire Chin-Ni Cheng, Yean-Der Kuan, Min-Feng Sung, Piin-Chyuan Huang pages 893-896 DOI: 10.1615/TFEC2019.fnc.028496

Fluid Measurements and Instrumentation

ANALYSIS OF PRESSURE DISTRIBUTION ALONG PIPELINE BLOCKAGE BASED ON THE CFD SIMULATION Lu Yang, Hao Fu, Huirong Liang, Yanbo Wang, Kegang Ling pages 897-905 DOI: 10.1615/TFEC2019.fmi.026131
THERMOMETRY OF FLOW FIELDS USING A TWO-COLOR RATIOMETRIC PLIF TECHNIQUE Seth M. Heronemus, Steven J. Eckels pages 907-919 DOI: 10.1615/TFEC2019.fmi.028164
MOUNT INTERFERENCE EFFECTS ON TOTAL TEMPERATURE PROBES Reuben A. Quickel, Sean Powers, Joseph A. Schetz, K. Todd Lowe pages 921-930 DOI: 10.1615/TFEC2019.fmi.028249
AN EXPERIMENTAL STUDY FOR LIQUID LEAKAGE DETECTION ATTEMPT IN A COLD PLATE M. Parlak, M. Turan, Vedat Yagcı pages 931-940 DOI: 10.1615/TFEC2019.fmi.027744
DESIGN AND DEMONSTRATION OF AN AUTOMATED BIDIRECTIONAL REFLECTOMETER FOR LOW-REFLECTIVITY OPTICAL COATINGS Deepali Shirsekar, N. Q. Vinh, J. Robert Mahan, Kory J. Priestley pages 941-947 DOI: 10.1615/TFEC2019.fmi.027537
INFLUENCE OF SURFACE PROPERTIES ON COOLING OF HOT BODIES IN LIQUIDS Arslan R. Zabirov, Victor V. Yagov, Pavel K. Kanin, Aleksey V. Dedov, Sergey D. Fedorovich pages 949-954 DOI: 10.1615/TFEC2019.fmi.027361
FREQUENCY CHARACTERISTICS OF A NATURAL CONVECTION BOUNDARY LAYER OF Pr=0.7 ADJACENT TO A VERTICAL ISOTHERMAL SURFACE Peng Zhao, J. Cao, Y. Xu, Yongling Zhao pages 955-963 DOI: 10.1615/TFEC2019.fmi.027563
STUDY THE BOUNDARY OF TWO-PHASE FLOW REGIME FROM BUBBLE TO SLUG FLOW Yanbo Wang, Hao Fu, Lu Yang, Sai Wang, Huirong Liang, Kegang Ling pages 965-980 DOI: 10.1615/TFEC2019.fmi.027622

Fundamentals in Fluid Flow and Heat/Mass and Momentum Transfer

VERTICAL COALESCENCE CHARACTERISTICS OF LIQUID DROPLETS PLACED OVER A HYDROPHOBIC SURFACE Praveen M. Somwanshi, Krishnamurthy Muralidhar, Sameer Khandekar pages 981-996 DOI: 10.1615/TFEC2019.fnd.027373
AN ANALYTICAL MODEL TO DETERMINE THE MAXIMUM ALLOWABLE POINT SOURCE HEATING WITH MINIMAL RISK TO PHASE-CHANGE OF LIQUIDS IN BRAIN TISSUE Smreeti Dahariya, Amy Rachel Betz pages 997-1007 DOI: 10.1615/TFEC2019.fnd.027388
NUMERICAL ANALYSIS OF HEAT AND MASS TRANSFER IN PACKED BEDS COMPOSED OF VARIABLE SIZE SPHERICAL PARTICLES Ewa Szymanek, Artur Tyliszczak pages 1009-1018 DOI: 10.1615/TFEC2019.fnd.027503
EXPERIMENTAL INVESTIGATION OF SUPERCRITICAL CARBON DIOXIDE IN HORIZONTAL MICRO PIN ARRAYS WITH NON-UNIFORM HEAT FLUX BOUNDARY CONDITIONS Saad A. Jajja, Jessa M. Sequeira, Brian M. Fronk pages 1019-1026 DOI: 10.1615/TFEC2019.fnd.027547
EXPERIMENTAL INVESTIGATION OF THE EFFECTS OF NANOFLUID CHARACTERISTICS ON VISCOSITY Austin J. Schelfhout, Saeid Vafaei pages 1027-1037 DOI: 10.1615/TFEC2019.fnd.027627
Numerical investigation on local heat transfer characteristics of S-CO2 in horizontal semicircular microtube Tenglong Cong, Yuandong Zhang, Minjun Peng pages 1039-1042 DOI: 10.1615/TFEC2019.fnd.027865
MATHEMATICAL STUDY OF CONVECTION HEAT TRANSFER UTILIZING SWCNT-WATER NANOFLUID INSIDE PARTIALLY HEATED HEXAGON CAVITY Feroz Ahmed Soomro, Rizwan Ul Haq pages 1043-1050 DOI: 10.1615/TFEC2019.fnd.027590
FORCE INTERACTION OF BOILING DISPERSED EMULSION PARTICLES Anatoliy M. Pavlenko pages 1051-1059 DOI: 10.1615/TFEC2019.fnd.027044
NUMERICAL INVESTIGATION OF EHD INSTABILITY OF NATURAL CONVECTION IN A VERTICAL DIELECTRIC FLUID SATURATED ANISOTROPIC POROUS LAYER B. M. Shankar, Jai Kumar, I. S. Shivakumara pages 1061-1070 DOI: 10.1615/TFEC2019.fnd.028472
CHARACTERIZATION OF THE DYNAMICS OF VAPOR BUBBLE COLLAPSE Raunak Bardia, Mario F. Trujillo pages 1071-1076 DOI: 10.1615/TFEC2019.fnd.028973
ASSESSING THE PHYSICAL VALIDITY OF DNS BENCHMARK TESTS FOR PHASE CHANGE Raunak Bardia, Mario F. Trujillo pages 1077-1081 DOI: 10.1615/TFEC2019.fnd.028974
NUMERICAL STUDY OF THE SECONDARY FLOW FORMATION OF A FLUID PASSING THROUGH A 90° ELBOW WITH SQUARE CROSS SECTION Manuel Ayala, O. F. Ayala, Orlando M. Ayala pages 1083-1092 DOI: 10.1615/TFEC2019.fnd.028007
AN EXPERIMENTAL STUDY ON THE DYNAMICS OF A LIQUID FILM UNDER SHEARING FORCE AND THERMAL INFLUENCE Ke Wang, W.M. Ma pages 1093-1101 DOI: 10.1615/TFEC2019.fnd.027953
NATURAL AND MIXED CONVECTION IN RECTANGULAR ENCLOSURES AND CHANNELS CONTAINING LIQUID METALS AND PARTITION WALLS Milorad B. Dzodzo pages 1103-1106 DOI: 10.1615/TFEC2019.fnd.028098
OPTIMIZATION OF TURBULENT HEAT TRANSFER BASED ON EXERGY DESTRUCTION MINIMIZATION PRINCIPLE Hui Xiao, Xinting Wang, Zhichun Liu, Wei Liu pages 1107-1114 DOI: 10.1615/TFEC2019.fnd.028400
FLOW VISUALIZATION AROUND MESOSCALE SOLID PARTICLE WITHIN A MOVING DROPLET USING MULTI-BODY DISSIPATIVE PARTICLE DYNAMICS Anupam Mishra, Ahmed A. Hemeda, Mohsen Torabi, Ting Liu, James Palko, Sachin Goyal, Yanbao Ma pages 1115-1125 DOI: 10.1615/TFEC2019.fnd.028436

Heat and Mass Transfer During Phase Change Processes

THEORETICAL ANALYSIS OF THE TIME-SCALING OF FROST GROWTH AND DENSIFICATION ON FLAT SURFACES Christian J. L. Hermes, Andrew D. Sommers pages 1127-1130 DOI: 10.1615/TFEC2019.phc.026134
EFFECT OF HUMIDITY AND AIRFLOW VELOCITY ON DROPLETS ELAPSED TIME AND RADIUS AT THE ONSET OF FREEZING AND FROST NUCLEATION FOR SUPER-HYDROPHILIC AND SUPERHYDROPHOBIC SURFACES Lorenzo Cremaschi, Burak M. Adanur, Ellyn Harges pages 1131-1142 DOI: 10.1615/TFEC2019.phc.026880
AN INVESTIGATION ON DIABATIC FLOW PATTERN CHARACTERISTICS DURING CONVECTIVE CONDENSATION INSIDE HORIZONTAL TUBES Tiago A. Moreira, Gherhardt Ribatski pages 1143-1153 DOI: 10.1615/TFEC2019.phc.028348

Heat and Mass Transfer Enhancement Techniques

EFFECT OF MICRO-FIN GEOMETRY ON LIQUID HEAT TRANSFER RATE AND PRESSURE DROP Shima Soleimani, Steven J. Eckels pages 1155-1166 DOI: 10.1615/TFEC2019.hte.027279
A NEW ABSORPTION MODEL FOR GOLD-BLACK BASED ON LOSSY ANTENNA THEORY Nazia Munir, J. Robert Mahan, Kory J. Priestley pages 1167-1176 DOI: 10.1615/TFEC2019.hte.027403
COMPARISON OF COOLING CAPACITY OF THE RANQUE-HILSCH VORTEX TUBES WITH DIFFERENT DIAMETERS Rutika Godbole, P. A. Ramakrishna pages 1177-1180 DOI: 10.1615/TFEC2019.hte.027502
THE EFFECT OF POROSITY ON REPRESENTATIVE VOLUME ELEMENT FOR PRESSURE DROP IN OPEN-CELL FOAMS Marcello Iasiello, Assunta Andreozzi, Nicola Bianco, Wilson K. S. Chiu, Vincenzo Naso pages 1181-1188 DOI: 10.1615/TFEC2019.hte.027687
INFLUENCE OF SURFACE ROUGHNESS ON ELECTROSTATIC SUPPRESSION OF THE LEIDENFROST STATE Onur Ozkan, Vaibhav Bahadur pages 1189-1197 DOI: 10.1615/TFEC2019.hte.027650
A NUMERICAL STUDY OF THE SIMULTANEOUS NATURAL CONVECTIVE HEAT TRANSFER FROM THE TOP AND BOTTOM SURFACES OF A THIN INCLINED PLATE HAVING A WAVY SURFACE WITH CONSTANT HEIGHT Santiago del Rio Oliveira, Patrick H. Oosthuizen pages 1199-1208 DOI: 10.1615/TFEC2019.hte.027670
EFFECTS OF ASYMMETRICAL VORTEX INTERACTION BY VARIABLE SWEPT VORTEX GENERATOR (VSVG) ON MASS TRANSFER ENHANCEMENT G. P. Aravind, M. Deepu pages 1209-1217 DOI: 10.1615/TFEC2019.hte.027755
HEAT TRANSFER CHARACTERISTICS OF TAYLOR-COUETTE FLOW IN WAVY CONICAL ANNULUS V. V. Swathi, S. Gokul , G. P. Aravind , M. Deepu pages 1219-1228 DOI: 10.1615/TFEC2019.hte.027777
Study of the formations of the thermal pollution from the activities of the power plant Alibek Issakhov, Yeldos Zhandaulet pages 1229-1236 DOI: 10.1615/TFEC2019.hte.027781

Heat and Mass Transfer in Renewable and Clean Energy Systems

HEAT TRANSFER ANALYSIS OF WATER DROPLETS ON PHOTOVOLTAIC PANELS Keyur Shah, Serdar Celik pages 1237-1247 DOI: 10.1615/TFEC2019.rce.028414
SIMULATION OF A VOLUMETRIC SOLAR ABSORBER USING THE THERMAL NON-EQUILIBRIUM HYPOTHESIS Marcelo J.S. de Lemos, Roberta dos R. Ribeiro pages 1249-1259 DOI: 10.1615/TFEC2019.rce.028069

Heat Pipes

CAPILLARY EVAPOTRATION ON NANOPOROUS MEMBRANE: A MOLECULAR DYNAMICS STUDY Ji Li, Shan Gao, Wei Liu, Zhichun Liu pages 1261-1268 DOI: 10.1615/TFEC2019.hpp.028502

Heat Transfer and Thermal Processes in Electronics and Power Applications

POOL BOILING HEAT TRANSFER ENHANCEMENT USING SINTERED PARTICLE WICK STRUCTURE Smreeti Dahariya, Athul J Pai, Gisuk Hwang, Amy Rachel Betz pages 1269-1278 DOI: 10.1615/TFEC2019.epa.027387
CREATING VORTEX GENERATORS USING PREFERENTIAL SURFACE WETTABILITY PATTERNING FOR AIR-SIDE HEAT TRANSFER ENHANCEMENT Andrew E. Koopman, Christian J. L. Hermes, Andrew D. Sommers pages 1279-1288 DOI: 10.1615/TFEC2019.epa.027602
EXPERIMENTAL STUDY ON STABILITY OF DIFFERENT NANOFLUIDS BY USING DIFFERENT NANOPARTICLES AND BASEFLUIDS Harkirat Sandhu, Dasaroju Gangacharyulu, Mani Kanwar Singh pages 1289-1297 DOI: 10.1615/TFEC2019.epa.027991
THERMAL AND HYDRAULIC PERFORMANCE OF LONGITUDINAL PERFORATED RECTANGULAR FINS WITH PERFORATION SHAPE AND SIZE VARIATIONS Hamid Maleki, Mohammad Reza Safaei, Arturo S. Leon, Truong Khang Nguyen pages 1299-1306 DOI: 10.1615/TFEC2019.epa.027962

HVAC, Buildings, and the Environment

FAULT DETECTION IN COMMERCIAL BUILDING VAV AHU: A CASE STUDY OF AN ACADEMIC BUILDING Suhrid Deshmukh, Stephen Samouhos, Leon R. Glicksman , Leslie Norford pages 1307-1319 DOI: 10.1615/TFEC2019.hbe.026663
PERFORMANCE ANALYSIS OF A HYBRID GROUND SOURCE HEAT PUMP SYSTEM WITH VARIOUS DIVERTER WATCH TEMPERATURES Gaoyang Hou, Hessam Taherian pages 1321-1330 DOI: 10.1615/TFEC2019.hbe.027346
ON-LINE FUZZY CONTROL OF A MULTI-ROOM BUILDING FACILITY J. Baltazar, A. Yarian, D. Clemons, Arturo Pacheco-Vega pages 1331-1340 DOI: 10.1615/TFEC2019.hbe.027663
TRANSPORT OF AEROSOL BY COUGHING IN AN AIR-CONDITIONED SPACE Bo Zhang, Guangyu Guo, Chao Zhu, Zhiming Ji pages 1341-1353 DOI: 10.1615/TFEC2019.hbe.028480

Micro/Nano Heat/Mass Transfer

HYDROTHERMALLY COATED OXIDE NANOPARTICLE-CONTAINING COMPOSITE FIBERS Shivani Patel, Saurabh Kansara, Yong X. Gan, Priscilla (Yitong) Zhao, Jeremy B. Gan pages 1355-1361 DOI: 10.1615/TFEC2019.mnt.028031
INVESTIGATION OF PHOTOTHERMAL CHARACTERISTICS OF Fe3O4 NANOFLUID Jeonggyun Ham, Tsogtbilegt Boldoo, Honghyun Cho pages 1363-1366 DOI: 10.1615/TFEC2019.mnt.028143
A PARAMETRIC STUDY ON DRAG REDUCTION USING ENGINEERED MICROTEXTURES IN VISCOUS LAMINAR FLOW Pooyan Tirandazi, John Healy, Carlos Hidrovo pages 1367-1377 DOI: 10.1615/TFEC2019.mnt.027620

Multiphase Flow

EFFECTIVENESS OF MICRO-DROPLET TRAIN AND MICRO-JET IMPINGEMENT IN SURFACE COOLING Syed Haq, Jayaveera Pandian Muthusamy, Taolue Zhang, Jorge L. Alvarado pages 1379-1382 DOI: 10.1615/TFEC2019.mph.028103
EFFECTS OF SYSTEM PARAMETERS ON THE TWO-PHASE FLOW AND HEAT TRANSFER BEHAVIOR IN A ROD BUNDLE Grant Garrett, Faith R. Beck, Yue Jin, Fan Bill Cheung, Stephen M. Bajorek, Kirk Tien, Chris Hoxie pages 1383-1396 DOI: 10.1615/TFEC2019.mph.027609
Numerical Modeling of the Effect of Chemical Dispersant on Oil Droplet Feng Gao, Fangda Cui, Lin Zhao, Michel Boufadel pages 1397-1406 DOI: 10.1615/TFEC2019.mph.028352
EXPERIMENTAL AND NUMERICAL STUDY OF SINGLE DROPLETS IMPINGING UPON LIQUID FILMS Daniel A. Vasconcelos R., Daniela F. S. Ribeiro, Jorge M. M. Barata, Andre R. R. Silva pages 1407-1410 DOI: 10.1615/TFEC2019.mph.028384
Experimental Study of Multiphase Jet Flow by Particle Imaging Velocimetry Measurement Feng Gao, Wen Ji, Fangda Cui, Lin Zhao, Michel Boufadel pages 1411-1417 DOI: 10.1615/TFEC2019.mph.028351
NUMERICAL STUDY OF SECONDARY FLOW OF A LIQUID-LIQUID TWO PHASE FLUID THROUGH A PIPE BEND WITH SQUARE CROSS-SECTIONAL AREA J. Manzanares, O. F. Ayala, Orlando M. Ayala pages 1419-1429 DOI: 10.1615/TFEC2019.mph.028006
ONE DIMENSIONAL VAPOR BUBBLE GROWTH MODEL FOR STEADY AND UNSTEADY PRESSURE FIELDS Ronnie Joseph, Kannan Iyer pages 1431-1438 DOI: 10.1615/TFEC2019.mph.028046
NUMERICAL INVESTIGATION ON THE EFFECT OF SURFACE WETTING PROPERTIES ON GAS − LIQUID TWO-PHASE FLOW IN MICROCHANNEL USING LEVEL SET METHOD Mouna Zaidani, Mohamed Sassi, Mihai Sanduleanu pages 1439-1444 DOI: 10.1615/TFEC2019.mph.028096

Nano and Micro Fluid Applications

BEHAVIOR OF GOLD NANOFLUID TRIPLE LINE Saeid Vafaei pages 1445-1449 DOI: 10.1615/TFEC2019.nma.027581
CONTROLLED MICROSTRUCTURES OF POROUS TIO2 FILMS WITH SINTERING PROCESS USING MULTI-TIO2 PARTICLES-BASED NANOFLUIDS Kazuhiro Manseki, Dai Hasegawa, Takashi Sugiura, Saeid Vafaei pages 1451-1456 DOI: 10.1615/TFEC2019.nma.027583
ANALYSIS OF CONVECTIVE HEAT TRANSFER IN A NANOFLUID SATURATED POROUS MEDIUM Sheikha M. Al-Weheibi, Mohammad Mansur Rahman pages 1457-1471 DOI: 10.1615/TFEC2019.nma.027691
CRYSTAL GROWTH CONTROL OF ANATASE AND RUTILE TIO2 NANOPARTICLES USING SOLUTION SYNTHESIS: A REVIEW Kazuhiro Manseki, Takashi Sugiura, Saeid Vafaei pages 1473-1479 DOI: 10.1615/TFEC2019.nma.027726
PLASMONIC NANOFLUIDS BASED ON JANUS NANOSHEETS AND SANDWICH-STRUCTURED NANOSHEETS FOR SOLAR ENERGY HARVEST Tianmi Wang, Gui-Hua Tang pages 1481-1484 DOI: 10.1615/TFEC2019.nma.027628
A NOVEL DESIGN FOR ENHANCING DROPLET TRANSPORT EFFICIENCY IN ELECTROWETTING-BASED DIGITAL MICROFLUIDIC SYSTEM Yin Guan, Baiyun Li, Mengnan Zhu, Shengjie Cheng, Jiyue Tu pages 1485-1494 DOI: 10.1615/TFEC2019.nma.028742

Numerical Heat Transfer and CFD Simulations

NUMERICAL SIMULATION OF MIXING ZONE GROWTH BETWEEN TWO FLUIDS UNDER ACCELERATION Carlton P. Adam, Hamid Hadim pages 1495-1500 DOI: 10.1615/TFEC2019.cfd.028147

Numerical Multiphase flow

A MIXTURE MODEL FOR THE SIMULATION OF THERMAL-HYDRAULICS BUBBLY FLOW Dia Zeidan, Alex A. Schmidt, Alice J. Kozakevicius, Stefan Jakobsson pages 1501-1506 DOI: 10.1615/TFEC2019.nmf.027859
CFD SIMULATION OF 90° PIPE BEND FOR MULTIPHASE FLOW OF ZINC TAILING-WATER SLURRY Paras Verma, Kundan lal, Jatinder Pal Singh, Satish Kumar pages 1507-1517 DOI: 10.1615/TFEC2019.nmf.027203
CFD-DEM APPROACH TO CALCULATE THE FLOWAND HEAT TRANSFER BEHAVIORS IN FLUIDIZED BED WITH IMMERSED TUBE AT PARTICLE SCALE Raj Nannamkeril Naveen , S. Vengadesan, Danesh K. Tafti pages 1519-1524 DOI: 10.1615/TFEC2019.nmf.027975
LIQUID BRIDGE ERUPTION FOR MESOSCALE GRAVURE PRINTING USING MULTI-BODY DISSIPATIVE PARTICLE DYNAMICS Mohsen Torabi, Ahmed A. Hemeda, Anupam Mishra, Ting Liu, Yanbao Ma pages 1525-1535 DOI: 10.1615/TFEC2019.nmf.028350
NUMERICAL ANALYSIS OF THE INFLUENCE OF THE JET-TO-JET SPACING BETWEEN TWO ADJACENT AIR JETS IMPINGING A FLAT PLATE Flavia V. Barbosa, Senhorinha F. C. F. Teixeira, José C. F. Teixeira pages 1537-1549 DOI: 10.1615/TFEC2019.nmf.028498
CFD SIMULATION OF TWO PHASE ANNULAR FLOW IN NATURAL GAS PIPELINES Ekhwaiter Abobaker, John Shirokoff, Mohammad Azizur Rahman pages 1551-1563 DOI: 10.1615/TFEC2019.nmf.028525

Radiation Heat Transfer

AN EFFICIENT MONTE CARLO-BASED SOLVER FOR THERMAL RADIATION IN PARTICIPATING MEDIA Joseph A. Farmer, Somesh P. Roy pages 1565-1573 DOI: 10.1615/TFEC2019.rad.027584

Refrigerants, AC and Refrigeration

MATERIAL PROPERTIES ANALYSIS OF CIRCUIT SUBASSEMBLIES: QUANTITATIVE CHARACTERIZATION OF SAPPHIRE (α-Al203) AND SILICON NITRIDE (Si3N4) USING CRYOGENIC CYCLING Kirsten A. Lovelace, Sonya T. Smith pages 1575-1588 DOI: 10.1615/TFEC2019.ref.027456
CUBIC AND MULTIPARAMETER EQUATIONS OF STATE EVALUATION FOR SUPERCRITICAL FLOW MODELING Leandro Magalhães, Eduardo Antunes, Andre R. R. Silva, Jorge M. M. Barata pages 1589-1592 DOI: 10.1615/TFEC2019.ref.028385
DESIGN AND ANALYSIS OF A FAME-MLL VAPOR-COMPRESSION REFRIGERATION CYCLE COMPRESSOR Kevin R. Anderson, Thomas Gross, Chris McNamara, Ariel Gatti pages 1593-1602 DOI: 10.1615/TFEC2019.ref.026265
AN EXPERIMENTAL and THEORETICAL STUDY on the MAGNETIC FIELD INSIDE HALBACH MAGNET ARRAYS and HEAT TRANSFER ANALYSIS FOR MAGNETIC REFRIGERATION APPLICATIONS Erim Yanik, Abdullatif Hamad, Serdar Celik pages 1603-1617 DOI: 10.1615/TFEC2019.ref.028487
A NUMERICAL MODELING OF NATURAL CONVECTION AIR COOLING OF A BUTT-FUSION WELD Drake Norman, Todd Otanicar, Daniel W. Crunkleton, Amanda Hawkins pages 1619-1628 DOI: 10.1615/TFEC2019.ref.028490
Room Air Conditioner Simulation Models for Heat Exchanger Design and Indoor Airflow Control Development Hajime Ikeda, Akinori Sakabe, Shingo Hamada, Mitsuhiro Shirota, Takashi Kobayashi pages 1629-1639 DOI: 10.1615/TFEC2019.ref.027625

Solar Energy

YEAR-ROUND SOLAR ENERGY FORECASTING AND STORAGE PREDICTION FOR NON-INTERRUPTED POWER SUPPLY Yasir M. Alfulayyih, Peiwen Li, Xiankun Xu pages 1641-1655 DOI: 10.1615/TFEC2019.sol.027436
PERFORMANCE EVALUATION OF A SOLAR-BIOGAS HYBRID RECUPERATOR MICROTURBINE FOR POWER GENERATION USING ASPEN-HYSYS Saad Alshahrani, Abraham E. Engeda pages 1657-1666 DOI: 10.1615/TFEC2019.sol.027600
PERFORMANCE ANALYSIS OF A METAL HYDRIDE-THERMAL ENERGY STORAGE SYSTEM FOR CONCENTRATING SOLAR POWER PLANTS Talal Alqahtani, Sofiene Mellouli, Faouzi Askri, Patrick E. Phelan pages 1667-1676 DOI: 10.1615/TFEC2019.sol.027379
CONJUGATE HEAT TRANSFER ANALYSIS OF AN OPEN DOUBLE GLAZING UNIT IN SEMI-ARID CLIMATIC CONDITIONS Miguel A. Gijón-Rivera, F. Noh-Pat, C. Rivera-Solorio, Jesus Xaman pages 1677-1686 DOI: 10.1615/TFEC2019.sol.027750
Heat Transfer and Fluid Flow in A Water-Filled Glass Louver Yi Nan, Zhixiong Guo pages 1687-1696 DOI: 10.1615/TFEC2019.sol.027879
Enhanced vacuum freezing for thermal desalination at the triple point Fangyu Cao, Jianjian Wang pages 1697-1700 DOI: 10.1615/TFEC2019.sol.027407

Spray and Droplet Phenomena

NUMERICAL AND EXPERIMENTAL STUDY OF HYDRODYNAMICS OF MULTIPLE DROPLET STREAM IMPINGEMENT FOR ATOMIZATION Jayaveera Pandian Muthusamy, Taolue Zhang, Jorge L. Alvarado pages 1701-1704 DOI: 10.1615/TFEC2019.spr.028821
THE EFFECT OF NOZZLE ELECTRIFICATION ON SPRAY FORMATION FROM AN AIRBLAST ATOMIZER Theodore J. Heindel, Julie K. Bothell, Thomas J. Burtnett, Danyu Li, Timothy B. Morgan, Alberto Aliseda, Nathanaël Machicoane, Katarzyna E. Matusik, Alan L. Kastengren pages 1705-1708 DOI: 10.1615/TFEC2019.spr.028854

Thermal Energy Storage

NOVEL FIN GEOMETRY FOR A LATENT HIGH TEMPERATURE THERMAL ENERGY STORAGE - EXPERIMENTAL INVESTIGATION Georg Scharinger-Urschitz, H. Walter, T. Bauernfeind pages 1709-1721 DOI: 10.1615/TFEC2019.tes.027516
NUMERICAL STUDY OF CaO/Ca(OH)2 DEHYDRATION PROCESS WITH A POROUS CHANNEL Mengyi Wang, Chen Li, Pu He, Wen-Quan Tao pages 1723-1734 DOI: 10.1615/TFEC2019.tes.027521
A NEW HYBRID HEAT STORAGE FIXED BED: PROOF OF CONCEPT Yi Ran Lu, Petr Nikrityuk pages 1735-1739 DOI: 10.1615/TFEC2019.tes.027960
COMPARISON OF NUMERIC MODELS FOR THE SIMULATION OF MOLTEN SALT THERMOCLINE THERMAL ENERGY STORAGE WITH FILLER UNDER DIFFERENT APPLICATIONS Christian Odenthal, Freerk Klasing, Thomas Bauer pages 1741-1750 DOI: 10.1615/TFEC2019.tes.027998
PARAMETER ESTIMATION FOR BATTERY KINETIC AND THERMOPHYSICAL PARAMETERS Serhat Bilyaz, Erik Archibald, Kevin C. Marr, Ofodike A. Ezekoye pages 1751-1762 DOI: 10.1615/TFEC2019.tes.028063
DISCHARGING PROCESS OF A HIGH-TEMPERATURE HEAT PIPE-ASSISTED THERMAL ENERGY STORAGE SYSTEM WITH NANO-ENAHNCED PHASE CHANGE MATERIAL Saeed Tiari, Olivia L. Rose, Mahboobe Mahdavi pages 1763-1772 DOI: 10.1615/TFEC2019.tes.028083
ON THE EFFECTS OF POROUS INSERTS ON THE IMPROVEMENT OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS CHARGING PERFORMANCE Mahboobe Mahdavi, Vivek Pawar, Carley Sawyer pages 1773-1777 DOI: 10.1615/TFEC2019.tes.028102
PERFORMANCE ANALYSIS OF NANO-ENHANCED PHASE CHANGE MATERIAL (NEPCM) BASED THERMAL BATTERY FOR WASTE HEAT RECOVERY IN TEMPERATURE RANGE OF 100°C − 150°C Vikram Soni, A. Kumar, V. K. Jain pages 1779-1782 DOI: 10.1615/TFEC2019.tes.028485

Transportation modeling tools and applications

Cold plate cooling simulation for Lithium-ion semi-passive battery thermal management system Damon Gresham-Chisolm, Sonya T. Smith pages 1783-1793 DOI: 10.1615/TFEC2019.tta.026494
A SYSTEMATIC INSTRUCTION FOR SELECTING METHODS TO DETECT PIPELINE LEAKAGES Lu Yang, Kegang Ling, Hao Fu, Huirong Liang, Yanbo Wang pages 1795-1804 DOI: 10.1615/TFEC2019.tta.026628
TRANSIENT THERMAL MODELING OF A FOUR-STROKE INTERNAL COMBUSTION ENGINE EXHAUST VALVE Mert Alpaya, Iskender Kayabasi, Burag Hamparyan, Orcun Aslan pages 1805-1817 DOI: 10.1615/TFEC2019.tta.027505

Turbulent Flows

TURBULENCE MODELING OF BOUNDARY LAYERS SUBJECT TO VERY STRONG FAVORABLE PRESSURE GRADIENT (FPG) WITH PASSIVE SCALAR TRANSPORT German Saltar, Guillermo Araya pages 1819-1833 DOI: 10.1615/TFEC2019.tfl.028426
RESOLUTION QUALITY INDICES FOR LARGE EDDY SIMULATION IN MODELLING A TURBULENT FREE JET Nimesh Virani, Vesselina Roussinova, Ram Balachandar pages 1835-1845 DOI: 10.1615/TFEC2019.tfl.027935
NUMERICAL INVESTIGATION OF FLOW IN A DUCT WITH SQUARE RIBS AND FORWARD STEP RIB MOUNTED ON WALLS Sreekesh K, S. Vengadesan, Danesh K. Tafti pages 1847-1853 DOI: 10.1615/TFEC2019.tfl.027977
COMPRESSIBILITY EFFECT ON SPATIALLY-DEVELOPING TURBULENT BOUNDARY LAYERS VIA DNS Guillermo Araya, Kenneth E. Jansen pages 1855-1863 DOI: 10.1615/TFEC2019.tfl.028382
CFD STUDY OF FLOW AROUND AHMED BODY Raphael Lienhart, Vimaldoss Jesudhas, Ram Balachandar, Ron M. Barron, Romain Rodriguez, Frederic Murzyn pages 1865-1868 DOI: 10.1615/TFEC2019.tfl.027816
NUMERICAL AND EXPERIMENTAL STUDY OF A PLUNGING AIRFOIL Rodolfo Lopes, Emanuel Camacho, Fernando Neves, Andre R. R. Silva, Jorge M. M. Barata pages 1869-1872 DOI: 10.1615/TFEC2019.tfl.028428

AN EXPERIMENTAL-STATISTICAL STUDY ON THERMAL CONDUCTIVITY AND VISCOSITY OF DIAMOND NANOFLUIDS Farzin Mashali, Aaron Bain, Ethan M. Languri, Jim Davidson, David Kerns pages 1873-1882 DOI: 10.1615/TFEC2019.tfl.028127
STATISTICAL REVIEW OF FOSSIL FUELS CONSUMPTION FOR DIFFERENT SECTORS AND FORECASTING THEIR ENDING TIME Mahsa Farzaneh, Arash Shadlaghani, Russell Reid pages 1883-1891 DOI: 10.1615/TFEC2019.cbf.027261