ライブラリ登録: Guest
8th Thermal and Fluids Engineering Conference (TFEC)
March, 26-29, 2023, College Park, MD, USA

目次:

Aerospace Applications

NUMERICAL STUDY OF THE COMPLETE OPERATING MAP OF EJECTORS IN ULTRA HIGH BYPASS RATIO ENGINE BLEED SYSTEMS Jagadish Babu Vemula, Matthieu Duponcheel, Yann Bartosiewicz pages 1-4 DOI: 10.1615/TFEC2023.aer.046042
Numerical study on the effect of the pylon downstream of the cavity-based scramjet combustor Prasanth P Nair, Vinod Narayanan pages 5-15 DOI: 10.1615/TFEC2023.aer.046452

Aerospace Applications / Heat Pipes and Cryogenics

A NUMERICAL STUDY OF DIFFERENT JET TAB CONFIGURATIONS FOR THRUST VECTOR CONTROL IN SUPERSONIC VEHICLES V M Jyothy, G. Jims John Wessley pages 17-28 DOI: 10.1615/TFEC2023.ahp.046347
EFFECT OF LIQUID-VAPOR INTERACTION ON THE THERMAL PERFORMANCE OF A FLAT GROOVED HEAT PIPE Beste Derebaşı, Samet Saygan, Barbaros Cetin, Zafer Dursunkaya pages 33-36 DOI: 10.1615/TFEC2023.ahp.045873
FSAE SINGLE SEATER RACE CAR DISC BRAKE NUMERICAL THERMAL ANALYSIS: A CASE STUDY Murat Otkur pages 37-45 DOI: 10.1615/TFEC2023.ahp.046135
NUMERICAL PREDICTION OF THE PERFORMANCE OF THE HIGH-PRESSURE TRANSONIC AXIAL TURBINE WITH PURGE FLOW PASSAGE Pitchai Pillai Sharmila, Dhiman Chatterjee pages 47-56 DOI: 10.1615/TFEC2023.ahp.045933

Applicatons in Thermal Fluids / Heat Transfer Engineering

A Study of Hop Kilning Energy Consumption with Respect to Drying Temperatures in the Pacific Northwest Matthew W. Thomas, Lindsey N. Rubottom, Thomas H. Shellhammer, Karl R. Haapala, Brian M. Fronk pages 57-60 DOI: 10.1615/TFEC2023.app.046323
An Initial Investigation of Endothermic Surface Emissions of Wake Bound Particles by means of Computational Fluid Dynamics Ryan D. Hanc, Laurie Florio pages 61-69 DOI: 10.1615/TFEC2023.app.046102
ANALYSIS OF AMMONIA RECOVERY FROM AMMONIA-NITROGEN WASTEWATER BASED ON AIR-GAP DIFFUSION DISTILLATION Xingyu Wu, Ping Wang, Xuan Zhang, Shiming Xu, Dongxu Jin, Xi Wu pages 71-79 DOI: 10.1615/TFEC2023.app.047409
ANALYSIS OF SPHERE OF INFLUENCE (SOI) AND PRESSURE DROP PARAMETER IN VOM-PHYS FRAMEWORK Rohan Amare, Amir A. Bahadori, Steven J. Eckels pages 81-88 DOI: 10.1615/TFEC2023.app.045913
DEVELOPMENT OF NOVEL SELF-SUCTION BOILING HEAT EXCHANGER Chaobin Dang, Shaobo Yang, Sihui Hong, Yu Chen pages 89-93 DOI: 10.1615/TFEC2023.app.046442
DISTURBANCE WAVE BEHAVIOR IN VERTICAL DOWNWARD ANNULAR FLOW Ana Luiza B. Santana, Eduardo N. dos Santos, Marco J. da Silva, Moisés A. Marcelino Neto, Rigoberto E. M. Morales pages 95-98 DOI: 10.1615/TFEC2023.app.046322
DOES LIQUID FILM TEMPERATURE AFFECTS SINGLE DROP IMPACT DYNAMICS? Andre F. S. F. Mendes, Daniel A. Vasconcelos R., Daniela F. S. Ribeiro, Miguel R. Oliveira Panão, Andre Silva pages 99-102 DOI: 10.1615/TFEC2023.app.046327
EFFECT OF HYDROSTATIC PRESSURE ON THE DEGASSING PERFORMANCE OF THE VACUUM BUBBLING PROCESS Yong-Du Jun pages 103-112 DOI: 10.1615/TFEC2023.app.046020
EFFECT OF THERMOPHYSICAL AND DIELECTRIC PROPERTIES OF A LIQUID DROPLET ON CONTINUOUS MOTION IN AN ELECTRIC FIELD Supriya Upadhyay, Krishnamurthy Muralidhar pages 113-125 DOI: 10.1615/TFEC2023.app.046315
EXPERIMENTAL STUDY OF THE EFFECT OF GAS DENSITY ON HORIZONTAL LIQUID-GAS FLOW Bruna P. Naidek, Matheus V. R. Pereira, Roberto da Fonseca Junior, Moisés A. Marcelino Neto, Rigoberto E. M. Morales pages 127-130 DOI: 10.1615/TFEC2023.app.046324
NUMERICAL INVESTIGATION OF HEAT EXCHANGER ENHANCED WITH DIFFERENT PERIPHERALLY-CUT TWISTED TAPES BY USING NANOFLUIDS Xinyu Ma, Changzhong Man, Changlu Juan, Haocen Han pages 131-140 DOI: 10.1615/TFEC2023.app.046588
SIMULATION OF HEAT TRANSFER CHARACTERISTICS IN A T-SHAPED ENCLOSURE WITH DIFFERENT BOUNDARY CONDITIONS Emel Evren Selamet, A. Selamet pages 141-148 DOI: 10.1615/TFEC2023.app.046426
Simulation of Heat Transfer of High-Concentration Al2O3/Water Nanofluid- Effect of Reynolds Number AmirReza Radmanesh, Nihad Dukhan pages 149-158 DOI: 10.1615/TFEC2023.app.045912
STUDY OF TRANSPORT PHENOMENA ON COOLING OF FLAT PLATE USING SWIRL JET IMPINGEMENT WITH CROSSFLOW Maximos G. Rizk, Omar G. Kaoud, A. M. T. A. Eldein Hussin, Walid Aboelsoud pages 159-169 DOI: 10.1615/TFEC2023.app.046615
THE EFFECT OF THERMOREGULATION ON THE AERODYNAMICS OF BUMBLEBEES Isa Gan, Munjal Shah, Javid Bayandor, Francine Battaglia pages 171-174 DOI: 10.1615/TFEC2023.app.046003

Combustion / Numerical Modeling

Analysis of local heat transfer in quenching of moving sheets with flat sprays Bilal Mehdi, Suresh Babu Gopalkrishna, H. Woche, Stephan Ryll, N.M. Naryan, Eckehard Specht, Udo Fritsching pages 175-182 DOI: 10.1615/TFEC2023.cnm.045463
AUTOMATED, INTELLIGENTLY MODULATING STOVES (AIMS) TO REDUCE RESIDENTIAL SPACE HEATING EMISSIONS Jason Loprete, Rebecca Trojanowski, Tom Butcher, Jon P. Longtin, Dimitris Assanis pages 183-191 DOI: 10.1615/TFEC2023.cnm.046341
Characteristics of Flow in the Upper Airway during High Flow Nasal Cannula Oxygen Therapy Robert Kacinski, Wayne Strasser, Scott Leonard pages 193-201 DOI: 10.1615/TFEC2023.cnm.046138
HAZARD ASSESSMENT OF FIRE CONSEQUENCES FROM A FUEL STORAGE EXPLOSION Alexander L. Brown, Randy C. Shurtz, Jason Wilke pages 203-218 DOI: 10.1615/TFEC2023.cnm.046152
Smoke Measurements from a High-flux Ignition Experiment Alexander L. Brown, Alvaro Cruz-Cabrera, Jessica Travis pages 219-229 DOI: 10.1615/TFEC2023.cnm.046246

Combustion, Fire and Fuels

ADVANCED CHEMICAL KINETICS OF THERMITE REACTIONS Kesiany M. de Souza, Marcelo J.S. de Lemos pages 231-240 DOI: 10.1615/TFEC2023.cbf.046112
EFFECT OF GEOMETRIC PARAMETERS ON THE HEAT TRANSFER PERFORMANCE OF COMPUTER CPU COOLERS Shuva Das, Majid Molki pages 241-253 DOI: 10.1615/TFEC2023.cbf.045036
EXPERIMENTAL INVESTIGATION OF THE PERFORMANCE OF 10KWE NON−CATALYTIC DIESEL AUTOTHERMAL REFORMER FOR MARINE FUEL CELL SYSTEM APPLICATIONS Ravinder Kumar, Mahesh M. Haridasan, Inzamam Ahmad, Atul Bhargav pages 255-264 DOI: 10.1615/TFEC2023.cbf.046444
MODELING THE NOVEL JONES ENGINE TOROIDAL CONCEPT IN HOMOGENEOUS CHARGE COMPRESSION IGNITION (HCCI) AND SPARK IGNITION (SI) COMBUSTION MODES Y. Yang, Dan DelVescovo pages 265-278 DOI: 10.1615/TFEC2023.cbf.045733
Numerical Simulation on the Flame Merging Behavior of the Multiple Pool Fires on Two Adjacent LNG Tanks with FLACS Guoxi He, Xinsheng Jiang, Xin Tang, Kuirong Liu, Di Chen, Kexi Liao pages 279-284 DOI: 10.1615/TFEC2023.cbf.046275
THE EFFECT OF AERODYNAMICS ON AIR BLAST ATOMIZER IN CO AND COUNTER ROTATING FLOWON SPRAY FLAMES Yogesh Biswal, Guguloth Mahesh Nayak, V.W, Ketan , Drabo Mebougna, Pankaj Kolhe pages 285-292 DOI: 10.1615/TFEC2023.cbf.046043
The Evaluation of the Wind Loads on a Wind Turbine under Different Wind Conditions Shuo-You Xiao, Yang-Cheng Shih pages 293-295 DOI: 10.1615/TFEC2023.cbf.046243

Computational Methods/Tools in Thermal-Fluid Systems

A COMPARISON OF RESULTS FOR THE LATTICE BOLTZMANN METHOD AND A NAVIER-STOKES SOLVER: NATURAL CONVECTION IN A 2D POROUS CAVITY Parimah Kazemi, Kevin J. Farrell pages 297-306 DOI: 10.1615/TFEC2023.cmd.046333
A GENERALIZED CHARACTERIZATION OF RADIATIVE PROPERTIES OF A POROUS MEDIA USING ENGINEERED FEATURES AND NEURAL NETWORK Amirsaman Eghtesad, Farhin Tabassum, Shima Hajimirza pages 307-310 DOI: 10.1615/TFEC2023.cmd.046074
A Method of Utilizing Characteristics of Flow Structures to Analyzing Heat Transfer Efficiency on Micro-fin Enhanced Surfaces Puxuan Li, Steven J. Eckels pages 311-324 DOI: 10.1615/TFEC2023.cmd.045775
A SHOCK TUBE WITH THE DRIVER GAS PRESSURE INTRODUCED THROUGH AN INLET PORT Majid Molki pages 325-338 DOI: 10.1615/TFEC2023.cmd.044953
A study on combustion characteristics according to the change in the secondary air input angle in an air-cooled combustion furnace Young-Jae Kim, Min-Choul Kim, Youn-Jea Kim pages 339-348 DOI: 10.1615/TFEC2023.cmd.046296
ACCURATE ESTIMATION OF RADIATION HEAT TRANSFER IN HETEROGENEOUS PACKED BEDS USING DATA-DRIVEN MODELING Farhin Tabassum, Amirsaman Eghtesad, Shima Hajimirza pages 349-352 DOI: 10.1615/TFEC2023.cmd.046100
CFD ANALYSES OF VARIOUS CHANNEL CONCEPTS TO REMOVE HEAT FOR THE SECOND TARGET STATION Min-Tsung Kao, Thomas J. McManamy, Igor Remec, Lukas Zavorka pages 353-362 DOI: 10.1615/TFEC2023.cmd.045639
CHARACTERIZATION OF THE VARIATION OF REMAINING EFFECTIVE STABILIZER IN AN ASSEMBLY OF PROPELLANT INCREMENTS Kenneth D. Blecker, Hamid Hadim pages 363-369 DOI: 10.1615/TFEC2023.cmd.045920
COMPARISON OF RESULTS WITH VARYING SOLUTION METHODS FOR FLOW OVER A WEDGE Laurie Florio pages 371-380 DOI: 10.1615/TFEC2023.cmd.045497
COMPUTATIONAL MODELING OF RED BLOOD CELL DYNAMICS USING A MESOSCOPIC MEMBRANE MODEL WITH THE IMMERSED BOUNDARY METHOD Pooja Vilas Bhagawat, Danesh K. Tafti pages 381-386 DOI: 10.1615/TFEC2023.cmd.046431
COOLING ENHANCEMENT OF ADDITIVELY MANUFACTURED INJECTION MOULDS USING BASIC AND TRIPLY PERIODIC MINIMAL SURFACE-BASED LATTICES Seyed Mahdi Akbarimoosavi, J. Lohan, D. O'Mahoney, Gerard J. McGranaghan pages 387-396 DOI: 10.1615/TFEC2023.cmd.045836
EFFECT OF GASEOUS RADIATION HEAT TRANSFER ON NON-PREMIXED COMBUSTION OF AMMONIA IN POROUS MEDIA Genesis Ponce, Kevin R. Anderson pages 397-407 DOI: 10.1615/TFEC2023.cmd.044799
EFFICIENT MODELING OF RADIATIVE TRANSFER IN HETEROGENEOUS MEDIA WITH HOT POINT BY COMBINING MONTE CARLO METHOD AND BAYESIAN NEURAL NETWORKS Alex Royer, Olivier Farges, Pascal Boulet, Daria Burot pages 409-418 DOI: 10.1615/TFEC2023.cmd.045769
INCORPORATING CFD AND ARTIFICIAL NEURAL NETWORK METHODS TO PREDICT THERMAL CHARACTERISTICS OF FLOW THROUGH PIPES Masoud Darbandi, Mohammad-Saleh Abdollahpour, Amir-Hossein Khalili, Gerry E. Schneider pages 419-427 DOI: 10.1615/TFEC2023.cmd.045964
INVERSE FLOW PREDICTION USING PINNS IN AN ENCLOSURE CONTAINING HEAT SOURCES Jerol Soibam, Ioanna Aslanidou, Konstantinos Kyprianidis, Rebei Bel Fdhila pages 429-438 DOI: 10.1615/TFEC2023.cmd.045937
Modeling multi-component discrete particulates Laurie Florio pages 439-448 DOI: 10.1615/TFEC2023.cmd.045496
MULTI-OBJECTIVE OPTIMIZATION OF STAGGERED ARRAYS OF STREAMLINED PIN FINS IN A FLAT RECTANGULAR COOLING DUCT FOR ELECTRIC VEHICLE POWER MODULES Retta Ito, Soichiro Hagiwara, Koichi Inoue pages 449-456 DOI: 10.1615/TFEC2023.cmd.046025
NUMERICAL SIMULATION OF FLUID FLOW IN HEAT EXCHANGERS WITH COMPLEX GEOMETRY Krystof Mraz, Jan Bohacek, Miroslav Raudensky pages 457-460 DOI: 10.1615/TFEC2023.cmd.045898
ON DEMAND FORMULATION OF THE GRADIENT ADAPTIVE TRANSFINITE ELEMENTS FOR FLOWFIELD PROBLEMS Timothy Marchelli, Nesrin Sarigul-Klijn pages 461-477 DOI: 10.1615/TFEC2023.cmd.046433
OPTIMIZATION OF REGULARIZATION IN INVERSE HEAT CONDUCTION ANALYSIS Keith A Woodbury, Hamidreza Najafi, Filippo de Monte pages 479-489 DOI: 10.1615/TFEC2023.cmd.046142
Parametric Modeling of Anomalous Heat Transfer at Material Interfaces Edward C. Michaelchuck, Jr., Jesse Duncan, Scott Ramsey, Troy Mayo, Samuel Lambrakos pages 491-500 DOI: 10.1615/TFEC2023.cmd.045800
PERFORMANCE ANALYSIS OF NON-GRAY RADIATION MODELS SLW AND WSGG AT THE LIMIT OF SMALLEST COMPUTATIONAL COST Soroush Rashidzadeh, Hadi Bordbar, Simo Hostikka, Guilherme Crivelli Fraga pages 501-504 DOI: 10.1615/TFEC2023.cmd.046310
SHOCK BIFURCATION IN A TUBE WITH A HIGH INLET PRESSURE Majid Molki pages 505-515 DOI: 10.1615/TFEC2023.cmd.045140
STRESS AND FATIGUE ANALYSIS OF AIR-TO-REFRIGERANT HEAT EXCHANGERS WITH NON-ROUND TUBE SHAPES Mingkan Zhang, Yoram Shabtay, James Tancabel, Zhenglai Shen, Daniel Bacellar, Vikrant Aute pages 517-524 DOI: 10.1615/TFEC2023.cmd.046319
TRANSIENT SIMULATION OF GLAZE ICE ACCRETION ON AN AIRCRAFT WING: A QUASI-STEADY APPROACH Arash Shad, SA Sherif pages 525-528 DOI: 10.1615/TFEC2023.cmd.046425
UNDERSTANDING THE DIFFERENCES BETWEEN CLASSICAL AND BAYESIAN STATISTICS APPLIED TO THERMALLY FORMED POLYMERICMATERIALS Ashley F. Emery pages 529-537 DOI: 10.1615/TFEC2023.cmd.046362
XGBOOST-BASED MODEL FOR PREDICTION OF HEAT TRANSFER COEFFICIENTS IN LIQUID COLD PLATES Mohammad Reza Shaeri, Michael C. Ellis, Andoniaina M. Randriambololona pages 539-542 DOI: 10.1615/TFEC2023.cmd.045483

Energy and Sustainability

AN EXPERIMENTAL SETUP FOR PLASMA GASIFICATION OF SEWAGE SLUDGE Nuno Pacheco, Flavia V. Barbosa, Andre Ribeiro, Joana Carvalho, Lucas Nascimento, Margarida Soares, Nadia Valerio, Luciana Faria, Andre Silva, Jorge Araujo, Luís Marques, J. C. F. Teixeira, Candida Vilarinho pages 543-557 DOI: 10.1615/TFEC2023.ens.046313
COMPARISON OF DIFFERENT FLUIDS FOR A HYBRID COOLING STRATEGY OF CYLINDRICAL LITHIUM-ION BATTERIES Seham Shahid, Martin Agelin-Chaab pages 559-568 DOI: 10.1615/TFEC2023.ens.045841
DESIGN AND PERFORMANCE ANALISYS OF SLINKYTM TYPE FOUNDATION HEAT EXCHANGERS FOR SPACE HEATING AND COOLING IN A COLD CLIMATE Shayan Davani, Amirhossein Darbandi, Prem Agarwala, Jordan Gruenes, Alison Hoxie, Aggrey Mwesigye pages 569-578 DOI: 10.1615/TFEC2023.ens.046078
IDENTIFYING KEY DESIGN PARAMETERS FOR ANTHROPOGENIC HEAT EMISSION AND ENERGY CONSUMPTION FROM BUILDING TO SUPPORT DECISION MAKING TOWARD URBAN HEAT ISLAND REDUCTION Mansour Alhazmi, Dongwoo Jason Yeom, David Sailor, Jyothis Anand pages 579-588 DOI: 10.1615/TFEC2023.ens.045838
NUMERICAL INVESTIGATION OF HYDRODYNAMIC AND THERMAL PERFORMANCE OF GRAVITY DRIVEN DILUTE FLOW IN A STRAIGHT CHANNEL Muhammad Umer, Bryan J. Siefering, Brian M. Fronk pages 589-598 DOI: 10.1615/TFEC2023.ens.045989
NUMERICAL STUDY OF A SOLAR-ASSISTED SCO2 BRAYTON CYCLE FOR POWER GENERATION Kenneth R. Weddle, Tarek Abdel-Salam, Kura Duba, Faete Filho pages 599-608 DOI: 10.1615/TFEC2023.ens.046408
PERFORMANCE EVALUATION OF GRAY-BOX AND MACHINE LEARNING MODELS OF A THERMAL ENERGY STORAGE SYSTEM WITH ACTIVE INSULATION Borui Cui, Jin Dong, Piljae Im, Sungkyun Jung, Melissa Voss Lapsa pages 609-618 DOI: 10.1615/TFEC2023.ens.046326
STUDY ON SERIES INTEGRATED POWER-ABSORPTION REFRIGERATION SYSTEM WITH ADJUSTABLE CONCENTRATION AND SOURCE/SINK PRESSURE Adityabir Singh, Ranjan Das pages 619-628 DOI: 10.1615/TFEC2023.ens.046508
STUDYING THE POTENTIAL OF DEPLOYING INTEGRATED HUMIDIFICATION-DEHUMIDIFICATION DESALINATION SYSTEM WITH SOLAR THERMAL SYSTEM Mahyar Abedi, Parnab Saha, Xu Tan, James F. Klausner, André Bénard pages 629-640 DOI: 10.1615/TFEC2023.ens.046007
THERMALLY INFORMED MOTION PLANNING TO ENHANCE MISSION ENDURANCE OF MOBILE ROBOTS Camilo Ordonez, Juan Ordonez, Jonathan Boylan, Joseph Lupton, Derek Vasquez, Jonathan Clark pages 641-652 DOI: 10.1615/TFEC2023.ens.046083

Energy and Sustainability / Applications in Thermal Fluids Heat Transfer Engineering

IMPACT OF DIVERSE ELECTRICITY GENERATION, HEATING, COOLING, AND STORAGE TECHNOLOGIES ON BUILDING ENERGY USE Rachel Gray, Saniya LeBlanc pages 653-656 DOI: 10.1615/TFEC2023.eap.046330
INFLUENCE OF THE PRANDTL NUMBER ON HEAT TRANSFER AT LIQUID FILM FLOWS DOWN SMOOTH AND ROUGH SURFACES T. Magrakvelidze , Giorgi Gigineishvili, A. Mikashavidze , T. Koberidze , Kh. Lomidze pages 657-663 DOI: 10.1615/TFEC2023.eap.045749
LAB-SCALE DEMONSTRATION OF THERMAL ENERGY STORAGE USING DESALINATION WASTE SALT George William Lockwood, Andres Rodríguez, Missael Cuevaschavez, Rozina N. Nalbandian, Reza Baghaei Lakeh pages 665-674 DOI: 10.1615/TFEC2023.eap.046082
ROOM AIR-FLOW INTERACTIONS BY AN AIR-SANITIZING DEVICE: COMPUTATIONS AND QUALITATIVE EXPERIMENTS Vedant Joshi, Devdatta Kulkarni, Varun Evuru, Thomas Dunbar, Francine Battaglia, Matthew J. Ringuette pages 675-684 DOI: 10.1615/TFEC2023.eap.045921
TEMPERATURE DISTRIBUTION IN MICRO-FINNED SURFACE DUCT USING PLIF TECHNIQUE Hatim Alrifaai, Steven J. Eckels pages 685-692 DOI: 10.1615/TFEC2023.eap.045874

Energy and Sustainability / Heat and Mass Transfer Enhancement Techniques

A Key Parameter in Design and Operation of Ocean Thermal Energy Conversion Plants Yongjian Gu pages 693-702 DOI: 10.1615/TFEC2023.eet.045114
A SUSTAINABLE POLYCOGENERATION PROTOTYPE FOR DECENTRALIZED PRODUCTION OF ELECTRICITY, DISTILLED WATER AND BIODIESEL Carolina Palma Naveira-Cotta, Ingrid V. Curcino, Bruno S. Reis, Abdul O. Cardenas Gomez, Paulo R.S. Costa Jr., Juliana D.C.G. Carvalho, Luz E. Penaranda Chenche, Joao A. Lima, Renato M. Cotta pages 703-707 DOI: 10.1615/TFEC2023.eet.047412
DEVELOPMENT OF NANO-ENHANCED MICRO-ENCAPSULATED PHASE-CHANGE MATERIALS FOR PASSIVE THERMAL MANAGEMENT AND STORAGE Patrick Adegbaye, Yong Pei, Mehdi Kabir, Ziyang Shen, Bao Yang, Jiajun Xu pages 705-714 DOI: 10.1615/TFEC2023.eet.046202
DEWATERING OF SLUDGE USING SUPERCRITICAL CARBON DIOXIDE Sai Kiran Hota, Andrew Lutz, Srujan K. Rokkam, Bhima Sastri pages 715-723 DOI: 10.1615/TFEC2023.eet.045881
ENERGY HARVESTING IMPROVEMENT OF A FLEXIBLE AIRFOIL WITH ACTIVE CONTROL Kiana Kamrani Fard, James A. Liburdy pages 725-736 DOI: 10.1615/TFEC2023.eet.045701
FEASIBILITY ANALYSIS OF WATER MAIN GEOTHERMAL HEAT PUMP SYSTEM FOR RESIDENTIAL BUILDING APPLICATIONS Brian L. Kohut, Yongxin Tao pages 737-746 DOI: 10.1615/TFEC2023.eet.046097
Fluid engineering issues in the design of industrial-scale flow batteries M Maruthi Prasanna, Sreenivas Jayanti pages 747-755 DOI: 10.1615/TFEC2023.eet.045828
METHOD FOR SYNTHESIZING A GAS WITH A PREDICTABLE COMPOSITION Anatoliy M. Pavlenko, Hanna Koshlak, Borys I. Basok pages 757-767 DOI: 10.1615/TFEC2023.eet.046261
NUMERICAL INVESTIGATION OF HEAT TRANSFER ENHANCEMENT FROM A PLANE SURFACE USING ANNULAR JET IMPINGEMENT WITH CROSSFLOW Omar G. Kaoud, Maximos G. Rizk, A. M. T. A. Eldein Hussin, Walid Aboelsoud pages 769-781 DOI: 10.1615/TFEC2023.eet.046614
NUMERICAL INVESTIGATION OF THE EFFECT OF WINGLET CONFIGURATIONS ON THE BLADE PERFORMANCE FOR HORIZONTAL AXIS WIND TURBINE Bayu Kusuma Wardhana, B. R. Shin pages 783-786 DOI: 10.1615/TFEC2023.eet.045960

Energy Storage Systems / Fuel Cells / Applications in Thermal Fluids Engineering

PERFORMANCE COMPARISON OF BATTERY THERMAL MANAGEMENT SYSTEMS BASED ON NUMERICAL SIMULATION Roya Rajabi, Sowmya Raghu, Robin James, Kevin Huang, Jamil A. Khan pages 787-795 DOI: 10.1615/TFEC2023.est.045905
PEROVSKITE THERMOCHROMIC TRANSPARENT WOOD SMART WINDOW FOR BUILDING ENERGY EFFICIENCY AND SUSTAINABILITY Yuwei Du, S. Liu, A. Pan, Tsz Chung Ho, Chi Yan Tso pages 797-804 DOI: 10.1615/TFEC2023.est.045528
Separating the Effect of Thermal Osmosis in PEM Fuel Cell Membrane Mixed Mode Dynamics Nicholas A. Ingarra, Chris J. Kobus, J. Maisonneuve pages 805-816 DOI: 10.1615/TFEC2023.est.046064
Using Three Variable State Equations To Gain Insight Into PEM Fuel Cell Membrane Thermodynamics Nicholas A. Ingarra, Chris J. Kobus, J. Maisonneuve pages 817-826 DOI: 10.1615/TFEC2023.est.046060

Energy Systems

CFD INVESTIGATION OF A NOVEL UNDERGROUND IRRIGATION TECHNIQUE IN POROUS SOIL Henry M. Sommer, Kevin R. Anderson pages 827-837 DOI: 10.1615/TFEC2023.esy.045492
EVAPORATION OF WATER FROM OTTAWA SAND USING AIR FLOWS ABOVE AND BELOW THE SAND LAYER Dylan Paap, Benjamin Weinhold, Partha Pratim Chakraborty, Will VandenBos, Melanie M. Derby pages 839-842 DOI: 10.1615/TFEC2023.esy.045917
EXAMINATION OF THE PERFORMANCE OF A THERMAL COMPRESSOR USING CFD ANALYSIS Pradeep Paljibhai Vaghela, Sean Stokes, Jobaidur Khan pages 843-861 DOI: 10.1615/TFEC2023.esy.045813
Fabrication of see-through thin film photovoltaic solar cells David J. Hwang, Yiting Zheng, Insoo Kim, Gee Yeong Kim, Won Mok Kim, Jeung-hyun Jeong pages 863-869 DOI: 10.1615/TFEC2023.esy.046352
INVESTIGATION OF RELATIVE HUMIDITY INFLUENCE ON SORPTION-BASED ATMOSPHERIC WATER HARVESTING PERFORMANCE BY PASSIVE RADIATIVE CONDENSERS Shengxi Bai, L.C. Chao, A. Pan, Tsz Chung Ho, Chi Yan Tso pages 871-880 DOI: 10.1615/TFEC2023.esy.045386
NUMERICAL ANALYSIS OF A LATENT HEAT THERMAL ENERGY STORAGE UNIT ASSISTED WITH POROUS FINS Kyle J. Shank, Mahboobe Mahdavi, Saeed Tiari pages 881-884 DOI: 10.1615/TFEC2023.esy.046336
ON A DOUBLE-EFFECT ABSORPTION COGENERATION CYCLE WITH AN ADJUSTABLE COOLING-TO-POWER RATIO Abdulmajeed Alghamdi, SA Sherif pages 885-888 DOI: 10.1615/TFEC2023.esy.046392
PERFORMANCE ANALYSIS OF A PACKED BED LATENT HEAT THERMAL ENERGY STORAGE WITH ENCAPSULATED SILICA AS PCM: NUMERICAL INVESTIGATION Masuda Afroj Lily, Tanvir Ahmed Refat, Tanvirul Abedien, A.K.M Monjur Morshed, Titan C. Paul pages 889-903 DOI: 10.1615/TFEC2023.esy.046264
THERMAL INVESTIGATION OF A CHILLER - COOLING TOWER CONFIGURATION WITH PRECOOLING PROVIDED BY A BRAYTON-CYCLE-BASED-SYSTEM Sumanta Acharya, Basile C. Salomon, Aleksandr Kozlov, Yaroslav Chudnovsky pages 905-922 DOI: 10.1615/TFEC2023.esy.045879
THERMODYNAMIC PERFORMANCE OF A HUMIDIFICATIONDEHUMIDIFICATION UNIT INTEGRATED WITH EJECTOR REFRIGERATION CYCLE FOR COOLING ENERGY AND FRESHWATER PRODUCTION Ramy H. Mohammed, Jeremy Spitzenberger, Shahab Keshavarz Mohammadian, Hongbin Ma pages 923-932 DOI: 10.1615/TFEC2023.esy.045870
VIABILITY AND ACCESSIBILITY OF NYC URBAN HEAT ISLAND OVER CURRENT TMY WEATHER DATA FOR ACCURATE ENERGY DEMAND PREDICTIONS Irena A. Weclawiak, Yongxin Tao pages 933-943 DOI: 10.1615/TFEC2023.esy.045781

Energy Systems / Computer Simulations

MODELING THE THERMAL RADIATION PENETRATION INTO THE LIQUID FUELS FOR FIRE SIMULATIONS Farid Alinejad, Hadi Bordbar, Simo Hostikka pages 945-954 DOI: 10.1615/TFEC2023.ecs.046309
NUMERICAL STUDY OF AIR SUPPLY DUCT LENGTH FOR A NOVEL PASSIVE DISPLACEMENT COOLING SYSTEM Shuai Guo, Kai Xian Cheng, Shirun Ding, Lin Qiao, Poh Seng Lee pages 955-959 DOI: 10.1615/TFEC2023.ecs.046519
NUMERICAL STUDY ON THERMAL COMFORT IN A LARGE OFFICE ROOM WITH PASSIVE DISPLACEMENT COOLING SYSTEM Lin Qiao, Shirun Ding, Shuai Guo, Kai Xian Cheng, Poh Seng Lee, Cher Seng Tay, Gilbert Lau pages 961-968 DOI: 10.1615/TFEC2023.ecs.046484
ON THE USE OF A PARABOLIC TROUGH SOLAR COLLECTOR WITH V-SHAPED RIBS Faisal Altwijri, SA Sherif, Ahmed M. Alshwairekh pages 969-972 DOI: 10.1615/TFEC2023.ecs.046413
Using Machine Learning to predict the melt-pool depth using structural melt pool length data in Laser Powder Bed Fusion Siva Surya Prakash Reddy Arikatla, Feiyang Bai, Nian Zhang, Fisseha L Gebre, Jiajun Xu pages 973-980 DOI: 10.1615/TFEC2023.ecs.046011

Experimental Methods/Tools and Instrumentation in Fluid Mechanics and Heat/Mass Transfer

An experimental study on a novel direct contact freeze-desalination unit Reza Kaviani, Hamidreza Shabgard pages 981-991 DOI: 10.1615/TFEC2023.exp.046345
BOILING ENHANCEMENT USING WATER JET IMPINGEMENT ON POROUS MEDIA COLUMNAR POST SURFACE William A. Bevan, Gisuk Hwang, Kyosung Choo pages 993-999 DOI: 10.1615/TFEC2023.exp.046263
Concurrent spectroscopic measurement of emissivity and temperature of burning single coal particles Yuan Yao, Di Chang, Aidin Panahi, Yiannis A. Levendis pages 1001-1004 DOI: 10.1615/TFEC2023.exp.046002
CORRELATIONS AMONG CHARACTERISTICS OF GYROID-TYPE CELLULAR FOAM STRUCTURES Nicola Bianco, Marcello Iasiello, G. Scarpati, M. Bartlett, Gerardo Maria Mauro, Assunta Andreozzi, Wilson K. S. Chiu pages 1005-1013 DOI: 10.1615/TFEC2023.exp.046031
EXPERIMENTAL INVESTIGATION OF DRAG REDUCTION OVER SUPERHYDROPHOBIC SURFACES IN AN OPEN CHANNEL FLOW Ahmed Mohamed, Xili Duan, Baafour Nyantekyi-Kwakye, Yuri S. Muzychka pages 1015-1019 DOI: 10.1615/TFEC2023.exp.045753
EXPERIMENTAL STUDY OF A TWO STAGE EHD GAS PUMP IN A SQUARE CHANNEL A K M Monayem H. Mazumder pages 1021-1028 DOI: 10.1615/TFEC2023.exp.046339
INFLUENCE OF MUDFLAPS AND LOADING ON THEWAKE OF A SIMPLIFIED EARTHWORKS DUMP TRUCK Bachar Obeid, Frederic Murzyn, B. Muresan-Paslaru, A. Razakamanantsoa pages 1029-1038 DOI: 10.1615/TFEC2023.exp.045910
MASS FLOW RATE MEASUREMENTS USING ENGINEERING PRINCIPLES Elizabeth J. Clifford, Christopher C. Daniels pages 1039-1048 DOI: 10.1615/TFEC2023.exp.045806

Flow and Heat Transfer in Biological Systems / Fluid Flow and Heat Transfer Multiphase Phenomena

A novel Approach for Patient Treatment Planning of Localized Cancer Priyanshi Porwal, Pradyumna Ghosh, Prashant Shukla pages 1049-1068 DOI: 10.1615/TFEC2023.bio.045903
ANALYSIS OF IMPINGEMENT JET HEATING AND COOLING OF THERMOMAGNETIC MATERIAL Giovanni Esposito, Jonathan Hey, Matteo Fasano pages 1069-1076 DOI: 10.1615/TFEC2023.bio.045944
ANALYSIS OF THE EFFECT OF ZnO-H2O ON THERMAL PERFORMANCE OF A FORCED-CIRCULATION FLAT PLATE SOLAR WATER HEATING SYSTEM Mercy N. A. A. Budu, Mbasopi Chinga, Kevin Nwaigwe pages 1077-1086 DOI: 10.1615/TFEC2023.bio.046626
Study of Biomagnetic fluid flow and heat transfer containing magnetic particles over a cylinder subject to prescribed heat flux Jahangir Alam, M.G. Murtaza, Efstratios E. Tzirtzilakis, M. Ferdows pages 1087-1096 DOI: 10.1615/TFEC2023.bio.045594

Flow Instability & Turbulence

FLOW INSTABILITY IN BUOYANCY-ASSISTED AND OPPOSED FLOWS THROUGH A VERTICAL PIPE IN THE LAMINAR REGIME OF MIXED CONVECTION-A NUMERICAL STUDY Somenath Gorai, Devranjan Samanta, Sarit Kumar Das pages 1097-1102 DOI: 10.1615/TFEC2023.fit.046071
STUDY ON THE HEAT TRANSFER AND PRESSURE DROP POWER CURVES FOR ENTROPY GENERATION RATE IN THE LAMINAR, TRANSITIONAL, AND TURBULENT FLOW REGIMES Sogo Mayokun Abolarin, Marilize Everts, Daniel R. E. Ewim, Adecunle O. Adelaja, Olabode T. Olakoyejo, Josua Petrus Meyer pages 1103-1112 DOI: 10.1615/TFEC2023.fit.046070

Fluid Flow and Heat Transfer in Industrial and Commercial Processes

Annual Performance of a Simulated Multi-Mode SDHW/SAHP System with Various Control Options Julian C. Howarth, Michael R. Collins pages 1113-1122 DOI: 10.1615/TFEC2023.icp.046381
DESIGN AND ANALYSIS OF A TUNNEL KILN FOR DHOKRA CRAFT Abhay Pratap Singh, Ankit Kumar, Sangeeta Kohli, M.R. Ravi pages 1123-1132 DOI: 10.1615/TFEC2023.icp.045962
EFFICIENT UTILIZATION OF PHASE CHANGE MATERIALS TO OPTIMIZE ENERGY IN BUILDINGS Khalil Khanafer, Ali Al-Masri pages 1133-1139 DOI: 10.1615/TFEC2023.icp.046113
THERMAL TRANSPORT PROPERTY AT A SOLID–LIQUID INTERFACE WITH ATOMIC STRUCTURES: STEP, CLUSTER, VACANCY, AND ADATOM Kunio Fujiwara, Kentaro Nishi, Masahiko Shibahara pages 1141-1149 DOI: 10.1615/TFEC2023.icp.046295

Fluid Flow and Heat Transfer in Industrial and Commercial Processes / Heat and Mass Transfer Enhancement Technicques

CALIBRATION OF A 1D EJECTOR MODEL FROM FULL-SCALE EXPERIMENTS Jan Van den Berghe, M. Delsipee, Philippe Planquart, Yann Bartosiewicz, Miguel Alfonso Mendez pages 1151-1154 DOI: 10.1615/TFEC2023.enh.046391
EFFECT OF INCLINED DIMPLE ARRANGEMENT ON FLOW AND HEAT TRANSFER IN A RECTANGULAR DUCT Samson Abiodun Aasa, Solomon O. Giwa, Adeola S. Shote, Sunday T. Oyinbo, Tiens C. Jen pages 1155-1164 DOI: 10.1615/TFEC2023.enh.045715
NUMERICAL INVESTIGATION OF DIFFERENT SHAPED MICROCHANNEL HEAT SINKS EMBEDDED INSIDE SILICON SUBSTRATE OF HIGH-POWER DENSITY GAN POWER AMPLIFIERS Orcun Yildiz pages 1165-1180 DOI: 10.1615/TFEC2023.enh.045829
PUMPED, HYBRID TWO-PHASE COOLING SYSTEM FOR HIGH HEAT FLUX ELECTRONICS Michael C. Ellis, Elizabeth K. Seber, Mohammad Reza Shaeri, Massoud Kaviany pages 1181-1188 DOI: 10.1615/TFEC2023.enh.045998

Fluid Flow and Heat Transfer in Industrial and Commercial Processes / Turbulent Flows

ANALYSIS THE BEHAVIOR OF HORIZONTAL MULTIPHASE FLOW IN THE PRESENCE OF A DENSE GAS R. Fonseca Jr., Pantaleao A., Silva Freire, Juliana Braga Rodrigues Loureiro pages 1189-1193 DOI: 10.1615/TFEC2023.tbf.045968
COMPARATIVE ASSESSMENT OF PUBLISHED MODELS FOR EQUIVALENT SAND-GRAIN ROUGHNESS HEIGHT BASED ON SURFACE STATISTICS Sangram Kumar Samal, Sandip Kumar Saha pages 1195-1198 DOI: 10.1615/TFEC2023.tbf.045886
EXPERIMENTAL STUDY OF NUCLEATE BOILING DYNAMICS IN A RECTANGULAR MINI-CHANNEL SET-UP Valentin Scheiff, Ioanna Aslanidou, Konstantinos Kyprianidis, Rebei Bel Fdhila pages 1199-1208 DOI: 10.1615/TFEC2023.tbf.045945
NUMERICAL STUDY FOR A MODE-2 ISW PROPAGATING OVER A TRAPEZOIDAL OBSTACLE WITH DIFFERENT SLOPES Ming Hung Cheng, Chih-Min Hsieh, Robert R. Hwang pages 1209-1212 DOI: 10.1615/TFEC2023.tbf.045777
SYNTHETIC TURBULENCE GENERATION FOR SCALE-RESOLVING CFD SIMULATIONS USING A MODIFIED STATISTICALLY-TARGETED FORCING METHOD D. Keith Walters pages 1213-1216 DOI: 10.1615/TFEC2023.tbf.046290

Fluid Flow and Heat Transfer Multiphase Phenomena

A COMBINED ACTIVE (PIEZOS) AND PASSIVE (MICROSTRUCTURING) ENHANCED MICRO-NUCLEATION RATE FLOW-BOILING APPROACH FOR STABLE HIGH HEAT-FLUX COOLING Amitabh Narain, D. Pandya, N. Agata, V. Vivek, S. Sepahyar, C. Jaolekar pages 1217-1226 DOI: 10.1615/TFEC2023.mpp.045982
A COMPREHENSIVE VALIDATION OF CFD-BASED WET STEAM APPROACH FOR THE MODELLING OF STEAM EJECTORS Rafal Fingas, Dario Ghezzi, Riccardo Mereu, Giorgio Besagni pages 1227-1236 DOI: 10.1615/TFEC2023.mpp.046293
THE SHAPE AND THICKNESS OF THE LIQUID FILM FORMED BY THE OBLIQUE IMPINGEMENT OF MULTIPLE JETS ONTO A WALL Hongzhou Zhang, Yong Huang, Weiwei Yuan pages 1237-1248 DOI: 10.1615/TFEC2023.mpp.045608
COMPARING THE PERFORMANCE OF MICROCHANNEL HEAT SINKS PRODUCED BY CNC MILLING VERSUS POWDER BED FUSION Stephen Pierson, Noshin Nawar, Han Hu pages 1249-1259 DOI: 10.1615/TFEC2023.mpp.045992
Fin Optimization by Approximate Asymptotic Method Hatim Alrifaai, B. Terry Beck pages 1261-1270 DOI: 10.1615/TFEC2023.mpp.045876
HYBRID VOLUME OF FLUID (VOF) AND LAGRANGIAN APPROACH FOR SIMULATING INTERACTIONS BETWEEN DISPERSED BUBBLES AND LARGE INTERFACES IN TWO-PHASE FLOW Xiang Zhang, Alexander S. Rattner pages 1271-1275 DOI: 10.1615/TFEC2023.mpp.046636
IMPACT OF ENERGY STORED IN THE INSULATING MATERIAL DURING A HYDRATE PLUG DISPLACEMENT THROUGH ONE-SIDED DEPRESSURIZATION IN GAS-CONDENSATE TWO-PHASE FLOW R. L. F. Castello Branco, C. V. Barreto, P. Serrano, A. Teixeira, L. S. Valim, Angela O. Nieckele pages 1277-1283 DOI: 10.1615/TFEC2023.mpp.046314
NUMERICAL ANALYSIS OF FINITE POROUS JOURNAL BEARING Elizabeth J. Clifford, Christopher C. Daniels pages 1285-1294 DOI: 10.1615/TFEC2023.mpp.045807
PHASE DISTRIBUTION AND INTERPHASE MASS TRANSFER OF CARRIER FLUIDS IN T-JUNCTION OF CARBON DIOXIDE SUBLIMATION SYSTEM Ningxia Wang, Jinghong Ning , Mao Liu pages 1295-1299 DOI: 10.1615/TFEC2023.mpp.046308
SIMULATING THE PLUME QUENCH FOR PLASMA SPRAY APPLICATIONS Alexander L. Brown pages 1301-1311 DOI: 10.1615/TFEC2023.mpp.046245
THE EFFECTS OF THE GRAVITY AND AIRFLOW ON THE THICKNESS PROFILE AND SHAPE OF THE CURVED LIQUID FILM Weiwei Yuan, Yong Huang, Hongzhou Zhang pages 1313-1322 DOI: 10.1615/TFEC2023.mpp.045607

Fluid Mechanics and Rheology of Nonlinear Materials and Complex Fluids /Turbulent Flows

Semi-Analytical Solution for Statistical Turbulent Boundary Layer over an Isothermal Horizontal Flat Plate Suraj Krishnamurti, Ankit Kumar, Swasti Sundar Mondal, Laltu Chandra pages 1323-1333 DOI: 10.1615/TFEC2023.rhe.046000

Fundamentals & Applications in Fluid Flow and Heat/Mass and Momentum Transfer

ANALYSIS OF VAPOR CONCENTRATION OF ETHANOL-WATER MIXTURE DROPLET FOR INKJET TECHNOLOGY: EXPERIMENT AND SIMULATION Panus Jonglearttrakull, Kazuyoshi Fushinobu, Masami Kadonaga pages 1335-1338 DOI: 10.1615/TFEC2023.fna.045747
BATTERY COOLING PLATE DESIGN WITH THE DIVERGING CHANNEL AND OBLIQUE FINS Hongseok Choi, Hoseong Lee pages 1339-1342 DOI: 10.1615/TFEC2023.fna.046017
EXPERIMENTAL INVESTIGATION OF CO2 HYDRATE FORMATION IN THE PRESENCE OF ZN-AL LDH NANOFLUID Ayaj Ahamad Ansari, Randeep Ravesh, Pradipta Kumar Panigrahi, Malay Kumar Das pages 1343-1349 DOI: 10.1615/TFEC2023.fna.046053
INSTABILITY OF A FLUID SATURATED ANISOTROPIC POROUS LAYER USING THERMAL NON-EQUILIBRIUM MODEL Anas Altawallbeh, S. Saraheen, A.A. Tawalbeh pages 1351-1359 DOI: 10.1615/TFEC2023.fna.046087
ON FROST FORMATION AND HEAT TRANSFER IN TURBULENT MOIST AIR FLOW USING DIRECT NUMERICAL SIMULATIONS Mahsa Farzaneh, Nadim Zgheib, S. Balachandar, SA Sherif pages 1361-1364 DOI: 10.1615/TFEC2023.fna.046463
VORTEX-INDUCED VIBRATIONS OF AN ELLIPTIC CYLINDER AT DIFFERENT ANGLES OF INCIDENCE Himalaya Sarkar, Subhankar Sen pages 1365-1373 DOI: 10.1615/TFEC2023.fna.046072

Fundamentals in Fluid Flow and Heat/Mass and Momentum Transfer

A NUMERICAL STUDY OF STEADY STATE NATURAL CONVCTIVE HEAT TRANSFER FROM THIN HORIZONTAL RECTANGULAR PLATES OF VARIOUS ASPECT RATIOS Koustav Bandyopadhyay, Patrick H. Oosthuizen pages 1375-1383 DOI: 10.1615/TFEC2023.fnd.045880
AERODYNAMIC INTERFERENCE OF VERTICAL AXIS WIND TURBINES IN ARRAY CONFIGURATION Zakria Toor, Haitham Bahaidarah, Shafiqur Rehman pages 1385-1394 DOI: 10.1615/TFEC2023.fnd.046027
ANTI-ICING PERFORMANCE OF A SUPERHYDROPHOBIC AND ELECTROTHERMAL COATING ON METALLIC SUBSTRATES Andrew Sullivan, Xili Duan, Jianming Yang pages 1395-1398 DOI: 10.1615/TFEC2023.fnd.045657
EFFECT OF A COATING ON TRANSIENT THERMAL SPREADING RESISTANCE IN A CYLINDRICAL FLUX TUBE Lisa Steigerwalt Lam, Sahar Goudarzi, Yuri S. Muzychka, Greg F. Naterer pages 1399-1409 DOI: 10.1615/TFEC2023.fnd.046328
FLOW AND HEAT TRANSFER FROM A HEATED CYLINDER MOVING ADJACENT TO WALL IN YIELD STRESS FLUIDS Preeti Suri, Naveen Kumar Tosawara, Swati A. Patel pages 1411-1421 DOI: 10.1615/TFEC2023.fnd.045894
Investigation of a Solid Particle Deposition Velocity in Drag Reducing Fluids with Salinity Obi Chinemerem, Mohammad Azizur Rahman, Venkata Konagandla, Rashid Hasan pages 1423-1433 DOI: 10.1615/TFEC2023.fnd.046104
MAGNETOHYDRODYNAMIC EFFECTS DUE TO GRAPHENE OXIDE NANOFLUID SLIP FLOW IN CONCENTRIC CYLINDERS Jagadeeshwar Pashikanti, Susmitha Priyadharshini D R pages 1435-1444 DOI: 10.1615/TFEC2023.fnd.046059
A NUMERICAL STUDY OF NATURAL CONVECTIVE HEAT TRANSFER FROM HORIZONTAL TWO-DIMENSIONAL AND CIRCULAR THIN TWOSIDED PLATES HAVING DIFFERENT THERMAL BOUNDARY CONDITIONS ON THE TOP AND BOTTOM PLATE SURFACES Patrick H. Oosthuizen pages 1445-1452 DOI: 10.1615/TFEC2023.fnd.045966
NUMERICAL INVESTIGATION OF FLOW OVER A LOW ASPECT RATIO ELLIPTICAL CYLINDER NEAR A MOVING WALL Saurabh Kukreti, NIKHIL KUMAR SINGH pages 1453-1457 DOI: 10.1615/TFEC2023.fnd.046041

Heat Exchangers: Compact, Novel, Networks

EFFECT OF OVERALL GEOMETRY ON DIRECT CONTACT CROSSFLOW PACKED BED CONDENSER Parnab Saha, Mahyar Abedi, Raghav Bihani, Xu Tan, André Bénard pages 1459-1462 DOI: 10.1615/TFEC2023.hex.046009
INFLUENCE OF HEADER CONFIGURATION ON FLOW DISTRIBUTION WITHIN A U-TYPE PLATE HEAT EXCHANGER Mohammed Mizanur Rahman, Sai Guruprasad Jakkala, André Bénard pages 1463-1472 DOI: 10.1615/TFEC2023.hex.046080
POLYMERIC HOLLOW FIBERS SERVING AS A CROSS-FLOWHEAT EXCHANGER IN LIQUID-TO-GAS APPLICATIONS Jiri Hvozda, Erik Bartuli, Miroslav Raudensky pages 1473-1479 DOI: 10.1615/TFEC2023.hex.045915
THERMAL AND HYDRAULIC PERFORMANCE ANALYSIS OF OFFSET STRIP FIN HEAT EXCHANGER FOR EV APPLICATION Junhyuk Kim, Jinwoo Oh, Hoseong Lee pages 1481-1484 DOI: 10.1615/TFEC2023.hex.046018

Heat/Mass Transfer Enhancement Techniques

A COUPLED FINITE DIFFERENCE-LATTICE BOLTZMANN-BASED PHASE FIELD MODEL FOR DENDRITIC EVOLUTION DURING METAL ADDITIVE MANUFACTURING David Korba, Like Li pages 1485-1498 DOI: 10.1615/TFEC2023.the.045914
AN EXPERIMENTAL INVESTIGATION ON THE EFFECT OF ADDING NANOPARTICLES TO SEAWATER IN RAPID COOLING SYSTEM Latefa Alhassan, Shikha A. Ebrahim, Sayantan Mukherjee, Naser Ali, Emil Pradeep pages 1499-1509 DOI: 10.1615/TFEC2023.the.045954
Effect of Inclination Angle of Butterfly-Wing Vortex Generator on entropy-generation in a Rectangular Microchannel Ananta Kumar Das, Somashekhar S Hiremath pages 1511-1514 DOI: 10.1615/TFEC2023.the.045946
EFFECTS OF HYDROPHOBIC AREA FRACTION IN A WETTABILITYPATTERNED EVAPORATOR FOR IMPROVING THERMAL PERFORMANCE OF AN ULTRATHIN VAPOR CHAMBER Yinchuang Yang, Jian Li, Xin Ye, Huihe Qiu pages 1515-1524 DOI: 10.1615/TFEC2023.the.045872
EVALUATION OF THREE MEASUREMENT TECHNIQUES FOR WATER-VAPOR MASS TRANSFER IN CASE OF DROPLET CONDENSATION Konstantin Niehaus, Marie-Christine Volk, Andreas Westhoff, Claus Wagner pages 1525-1536 DOI: 10.1615/TFEC2023.the.046304
HEAT TRANSFER ENHANCEMENT OF A COIL HEAT EXCHANGER USING NANOFLUIDS WITH METAL OXIDE NANOPARTICLES DISPERSED IN WATER, OIL AND EHTYLENE GLYCOL Carlos Rivera Solorio, Miguel A. Gijón-Rivera, Enrique Mitz, Sergio U. Llamas-Guillen pages 1537-1547 DOI: 10.1615/TFEC2023.the.046008
TOMOGRAPHY-BASED PORE-SCALE MODEL AND PREDICTION OF FLOW AND THERMAL TRANSPORT PROPERTIES FOR THERMOCHEMICAL ENERGY STORAGE MATERIALS David Korba, Ashreet Mishra, Marwa El Amrani, Kelvin Randhir, Nima Rahmatian, James F. Klausner, Nick AuYeung, Like Li pages 1549-1560 DOI: 10.1615/TFEC2023.the.045984

Multiphase Flows / Nano and Micro Fluids Applications

DYNAMIC SPREADING AND INFILTRATION OF A MOLTEN SAND DROPLET ON A POROUS SURFACE Rahul Babu Koneru, Garrett Foreman, Alison Flatau, Zhen Li, Luis Bravo, Muthuvel Murugan, Anindya Ghoshal, George Em Karniadakis pages 1561-1568 DOI: 10.1615/TFEC2023.mnm.045977
Experimental Investigation of Heat Transfer of Al2O3 Nanofluids in Pool Boiling Wagd Ajeeb, S. M. Sohel Murshed pages 1569-1572 DOI: 10.1615/TFEC2023.mnm.045840
USE OF PULSED CURRENTS FOR ELECTROPOLISHING AND SHAPING OF MICRO-MOULD TOOLS TO REDUCE DEMOULDING DEFECTS Sana Zaki, N. Zhang, Michael D Gilchrist pages 1573-1580 DOI: 10.1615/TFEC2023.mnm.046262

Multiphase Flows / Nano Fluids / Heat Pipes

EFFECT OF MANIFOLD CONFIGURATIONS ON THE ENTROPY GENERATION IN RECHARGING MICROCHANNEL HEAT SINK Sangram Kumar Samal, Manoj Kumar Moharana pages 1581-1589 DOI: 10.1615/TFEC2023.mpf.046044

Multiphase Flows /Heat Pipes / Cryogenics

BUBBLE NUCLEATION AND DEPARTURE IN CRYOGENIC ANNULAR FLOWS − AN EXPERIMENTAL INVESTIGATION Sean Orchuk, Sanjeev Chandra pages 1591-1601 DOI: 10.1615/TFEC2023.cry.046515
Experimental Study and Analysis of the Desublimation of CO2 Michael Adebayo Oyinloye, Sreenivasa Rao Gubba, William L. Roberts pages 1603-1610 DOI: 10.1615/TFEC2023.cry.046035

Numerical Modeling Applications / Energy Systems

Development of The Bombardier Beetle Fire Extinguisher: CFD Model Investigation Elijah Yoder, Wayne Strasser pages 1611-1622 DOI: 10.1615/TFEC2023.num.045958
LAMINAR AND TURBULENT NUMERICAL ANALYSIS ON TREE-SHAPED DISC HEAT CONVECTION WITH DIFFERENT SOLID/FLUID CONFIGURATIONS Derli Amaral, Jose' L. Lage, James Francis, Emily Lang, Salim Solayman pages 1623-1635 DOI: 10.1615/TFEC2023.num.046048
MULTIPHYSICS SIMULATION OF RICH VS. LEAN CHARGE MIXTURES IGNITED BY NANOSECOND PULSED TRANSIENT PLASMA IGNITION SYSTEMS Mariano Rubio, Genesis Ponce, Kevin R. Anderson pages 1637-1648 DOI: 10.1615/TFEC2023.num.044665
THE EFFECT OF PREMIXED ETHANOL RATIO BASED ON THE SAME HEATING VALUE ON THE COMBUSTION AND EXHAUST EMISSIONS CHARACTERISTICS IN THE RCCI ENGINE FOR CARBON EMISSION REDUCTION Se Hun Min, JunSang Yoo, Eun Sang Lee, Hyun Kyu Suh pages 1649-1653 DOI: 10.1615/TFEC2023.num.046541
THERMAL ANALYSIS OF A TRIGENERATION SYSTEM WITH COMBINED HEATING, COOLING AND POWER GENERATION Pankaj K. Srivastava, Mihir Kumar Pandey pages 1655-1668 DOI: 10.1615/TFEC2023.num.045771

Refrigeration, Air Conditioning Systems, and Refrigerants & Heat Pumps

A DYNAMIC ENERGY MODEL FOR DISPLAY CASES CONSIDERING FAULTS IN SUPERMARKETS FOR LOW GWP REFRIGERANTION Yanfei Li, Jian Sun, Zhiming Gao, Borui Cui pages 1669-1678 DOI: 10.1615/TFEC2023.ref.046340
AN EXPERIMENTAL INVESTIGATION ON SPRAY EVAPORATION OF R1234ZE(E)/POE-68 MIXTURE ON AN ENHANCED TUBE BUNDLE Jerin Robins Ebanesar, Lorenzo Cremaschi pages 1679-1689 DOI: 10.1615/TFEC2023.ref.046129
ENERGY PERFORMANCE ANALYSIS OF AIR-ASSISTED SURFACE-WATER SOURCE HEAT PUMP SYSTEMS USING HEAT SOURCE COMPENSATION STRATEGIES Hyun Ho Shin, Hyun Ku Cho, Yongchan Kim pages 1691-1694 DOI: 10.1615/TFEC2023.ref.045851
REVIEW ON VOID FRACTION MODELS AND CHARGE ESTIMATION FOR GROOVED TUBES Suraj Krishnamurti, Daniel Bacellar, Vikrant Aute pages 1695-1704 DOI: 10.1615/TFEC2023.ref.046091

Refrigeration, Air Conditioning Systems, and Refrigerants & Heat Pumps / Energy Storage

COMPARATIVE ASSESSMENT OF VARIOUS DUAL-PHASE CYCLES USED FOR SPACE-COOLING Gaurav Singh, Ranjan Das pages 1705-1712 DOI: 10.1615/TFEC2023.rfs.046500
Evaluation of Phase-change Material Performance in Hot and Dry Climate for Building Efficiency Inzamam Ahmad, Ravinder Kumar, Uddipta Ghosh, Atul Bhargav pages 1713-1721 DOI: 10.1615/TFEC2023.rfs.046443
Healthy and Energy-saving Design in a University Library Yu-Kai Huang, Yang-Cheng Shih pages 1723-1725 DOI: 10.1615/TFEC2023.rfs.046242
HYDRODYNAMIC ANALYSIS OF A NOVEL CIRCULAR, SPLIT-SERPENTINE PLANAR FLOW FIELD Ammu Usha Manasa, Pinjala Vishnuvardhan, B. Rajbharath, Sreenivas Jayanti pages 1727-1736 DOI: 10.1615/TFEC2023.rfs.045951
Improving Low-temperature Performance of Vanadium Flow Battery through Thermal Activation of Electrodes Pavan Kumar Vudisi, Sreenivas Jayanti, Raghuram Chetty pages 1737-1746 DOI: 10.1615/TFEC2023.rfs.046019
LONG-TERM THERMAL PERFORMANCE ANALYSIS OF A HORIZONTAL FOUNDATION HEAT EXCHANGER FOR SPACE HEATING AND COOLING IN EXTREMELY COLD CLIMATES Amirhossein Darbandi, Shayan Davani, Jordan Gruenes, Prem Agarwala, Alison Hoxie, Aggrey Mwesigye pages 1747-1757 DOI: 10.1615/TFEC2023.rfs.045922
OPTIMUM FREEZE DESALINATION CONFIGURATION FOR MAXIMUM THEORETICAL ENERGY EFFICIENCY Aly Elhefny, Hamidreza Shabgard, Jie Cai pages 1759-1768 DOI: 10.1615/TFEC2023.rfs.046410

Refrigeration, Air Conditioning Systems, and Refrigerants & Heat Pumps - I, Flow Instability - II, Turbulent Flows -II

NUMERICAL STUDY ON THE THERMAL PERFORMANCE OF DOUBLE ROOF DESIGN Weihan Warren Zhang pages 1769-1779 DOI: 10.1615/TFEC2023.rfs.045832
THREE-DIMENSIONAL FLOW TRANSITION AROUND A HEATED DIAMOND-SHAPED CYLINDER IN MIXED CONVECTIVE FLOW REGIME: A DNS STUDY Mohd Perwez Ali, Nadeem Hasan, Sanjeev Sanghi pages 1781-1788 DOI: 10.1615/TFEC2023.fit.046434
INTEGRAL TRANSFORM OF HEAT CONDUCTION IN ANISOTROPIC HETEROGENEOUS MEDIA: APPLICATION TO THERMAL METAMATERIALS Renato M. Cotta, Carolina Palma Naveira-Cotta, Mohammed Lachi, Arthur E.H. Bruno pages 1795-1798 DOI: 10.1615/TFEC2023.efm.047408
HYBRID NANOFLUID OPTIMIZATION FOR THERMAL MANAGEMENT APPLICATIONS Gabriel Herrera, Affan Ali, Jake Wohld, Shaik Ikram Uddin, Cristian Gaytan, Saeid Vafaei pages 1799-1808 DOI: 10.1615/TFEC2023.mnm.046153