7th Thermal and Fluids Engineering Conference (TFEC) - Sumário

ISSN Online: 2379-1748

7th Thermal and Fluids Engineering Conference (TFEC)

Indexed in

May, 15-18, 2022 , Las Vegas, NV, USA

Sumário:

Aerospace Applications

SPREADING DYNAMICS OF AN ELECTRICALLY ACTUATED WATER DROPLET OVER A HYDROPHOBIC SURFACE Supriya Upadhyay, Vandana Jain pages 1-14 DOI: 10.1615/TFEC2022.aer.040781

INTEGRATED STAGE CYCLE ANALYSIS OF ALL LOX-LCH4 INDIAN MICRO-LAUNCHER Vishak Sasidharan, Kiran Mohan, Fahd Bin Abdul Hasis, Nandakumar V., Suresh Kumar C., Jayan N. pages 15-24 DOI: 10.1615/TFEC2022.aer.040784

AEROTHERMAL ANALYSIS OF FLOW OVER A FLAT PLATE IN ATMOSPHERIC RE-ENTRY CONDITION USING DSMC METHOD KS Santhosh , Milin Martin, S. Anil Lal pages 25-34 DOI: 10.1615/TFEC2022.aer.040789

HEAT TRANSFER AND ENTROPY GENERATION ANALYSIS PAST A BLUNT HEADED CYLINDER WITH CORNER MODIFICATION Ashish P. Pawar, Sandip Sarkar, Sandip Kumar Saha pages 35-43 DOI: 10.1615/TFEC2022.aer.040791

DIRECT NUMERICAL SIMULATION ON THE DRAG REDUCTION OF TURBULENT FLOW OVER STREAMWISE CONSTANT GROOVES Yixiao Li pages 45-51 DOI: 10.1615/TFEC2022.aer.040832

EFFECTS OF TURBULENCE MODELS ON FLUTTER CHARACTERISTICS OF THE AGARD 445.6 WING IN TRANSONIC FLOW USING STRONGLY COUPLED TWO-WAY FLUID-STRUCTURE INTERACTION Amit K. Thawait, Parag Tandaiya, Abhilash J. Chandy pages 53-57 DOI: 10.1615/TFEC2022.aer.040842

CHARACTERISTICS OF A LEADING-EDGE SEPARATED SHEAR LAYER OVER A BI-SCALED ROUGH SURFACE Ganesh K T, Anand Kaliyaraju, Nadaraja Pillai S pages 59-68 DOI: 10.1615/TFEC2022.aer.040879

INFLUENCE OF HYDROPHOBIC SURFACE ON FRICTIONAL DRAG Yuxuan Li, Jianzhi Yang pages 69-75 DOI: 10.1615/TFEC2022.aer.040889

DESIGN AND DEVELOPMENT OF A SMART MUTILAYER COATING WITH VARIABLE EMISSIVITY CAPABILITY FOR SPACECRAFT THERMAL CONTROL SYSTEMS Juvani Downer, Mehdi Kabir, John Irungu, Calin Tarau, Bao Yang, Jiajun Xu pages 77-86 DOI: 10.1615/TFEC2022.aer.041124

Evaluation of Different Turbulence Models for an Internal Bounded Flow at Low Reynolds Number Fardin Khalili, Hammam A. Abalary, Peshala P. T Gamage, Richard H. Sandler, Hansen A. Mansy pages 87-96 DOI: 10.1615/TFEC2022.aer.041236

A NUMERICAL ANALYSIS OF SWEEPING AIR JET IMPINGEMENT COOLING FROM A FLUIDIC OSCILLATOR Ramy Abdelmaksoud, Ting Wang pages 97-113 DOI: 10.1615/TFEC2022.aer.041320

Aerospace Applications and Energy Processes

MATHEMATICAL MODELING OF A THERMOELECTRIC GENERATOR UNICOUPLE Sarah E. Wielgosz, Shane P. Riley, Kevin Yu, Michael J. Durka, Bill J. Nesmith, Fivos Drymiotis, Jean-Pierre Fleurial, Matthew M. Barry pages 115-132 DOI: 10.1615/TFEC2022.aae.040927

Thermal Control Solutions for Spacecraft Thermal Management Jacob Moulton, D. Hengeveld, S. Lockyer, J. Eyre, M. Saldana pages 133-140 DOI: 10.1615/TFEC2022.aae.041153

Analysis and Optimization of Thermal-Fluid Systems

Experimental Investigation of Gas Kick behavior during Shut-in Condition Chinemerem E. Obi, A. Rashid. Hasan, Luis Abril, Kaushik Manikonda, Mohammad Azizur Rahman pages 141-150 DOI: 10.1615/TFEC2022.tfs.040677

VOLUMETRIC FLOW MEASUREMENT INSIDE A WATER LADLE MODEL WITH SHAKE-THE-BOX SYSTEM Xipeng Guo, Yun Liu, Chenn Q. Zhou pages 151-159 DOI: 10.1615/TFEC2022.tfs.040802

ANALYSIS OF THERMAL PERFORMANCE FOR SUPERCRITICAL FLUID FLOWING IN A MICROCHANNEL HEAT SINK UTILIZING INTERNAL FINS Nitesh Kumar, Dipankar Narayan Basu pages 161-169 DOI: 10.1615/TFEC2022.tfs.040865

DESIGN AND DEVELOPMENT OF ADDITIVELY MANUFACTURED MICROCHANNEL HEAT EXCHANGERS OF DIFFERENT CROSS SECTIONS AND ASPECT RATIOS Evan Preller, Jaime Rios, Mehdi Kabir, Jiajun Xu pages 171-182 DOI: 10.1615/TFEC2022.tfs.041123

A NOVEL HPC SCALING OPTIMIZATION METHODOLOGY Reid Prichard, Wayne Strasser pages 183-192 DOI: 10.1615/TFEC2022.tfs.041416

DEVELOPMENT OF IGNITION PELLETS FOR BIOMASS COOKSTOVES Manish Gupta, Vipul Vibhanshu, Akshansh Kataria, A. Ray, Sangeeta Kohli pages 287-292 DOI: 10.1615/TFEC2022.ens.040854

ENERGY EFFICIENCY IMPROVEMENT OF COMPRESSED AIR SYSTEMS THROUGH ACCURATE LEAK FLOW MEASUREMENT UTILIZING ACOUSTIC IMAGING TECHNOLOGY Patrick Swiecichowski, Ethan M. Languri pages 293-309 DOI: 10.1615/TFEC2022.ens.040858

A VERIFICATION OF ENERGY SAVINGS IN AIR COMPRESSORS UNDER LOAD/UNLOAD CONDITIONS THROUGH RECEIVER STORAGE Miles C. Nevills, Anthony Taylor, Glenn Cunningham, Ethan M. Languri pages 311-317 DOI: 10.1615/TFEC2022.ens.040919

LIGAND-ASSISTED LOW-TEMPERATURE GROWTH OF SnO₂ NANOAGGREGATES Amanda Heard, Faisal Rafi, Harshini Vasudevanallur Subra, Saeid Vafaei, Stephan Lucas, Daichi Inoue, Takashi Sugiura, Kazuhiro Manseki pages 319-324 DOI: 10.1615/TFEC2022.ens.040977

DETAILED MODELING OF THE FLASH HYDROLYSIS OF ALGAE FOR BIOFUEL PRODUCTION N. Legrand, Orlando M. Ayala, S. Kumar, R. Ash pages 325-337 DOI: 10.1615/TFEC2022.ens.041006

NUMERICAL SIMULATION OF THE FLOW GENERATED BY THE DISCHARGE OF A SEWAGE PIPE TO A CANAL OF A SEWER SYSTEM Luis Velazquez-Araque, G. Cedeño-Sacón, A. Cuadro-Rodríguez pages 339-348 DOI: 10.1615/TFEC2022.ens.041190

ENERGY EFFICIENCY STUDY FOR TWO-STORY HOUSE USING THERMAL NETWORK MODEL Amy K. Chang, Kevin Chang pages 349-352 DOI: 10.1615/TFEC2022.ens.041230

FEASIBILITY AND PERFORMANCE OF COMMERCIAL SMALL-SCALE ORGANIC RANKINE CYCLE (ORC) SYSTEMS USING MODERN WORKING FLUIDS: A CASE STUDY BASED ON TWO COMMERCIAL CO-GENERATION INSTALLATIONS IN SWEDEN Joakim Wren, Kristina Pettersson, Igor Cruz, Maria Johansson pages 353-356 DOI: 10.1615/TFEC2022.ens.041234

Energy Storage Systems

THERMAL CONDUCTIVITY OF LIQUIDS MEASURED WITH THE TRANSIENT HOT-WIRE TECHNIQUE Sofia Mylona, Renzo Flores, Oriana Micelotta, Dale H. Hume pages 357-366 DOI: 10.1615/TFEC2022.emt.040805

Analysis of Variable Heat Transfer Fluid Parameters in a Latent Heat Thermal Energy Storage Unit Enhanced by Fins Kyle J. Shank, Samantha Moretti, Jessica A. Bernat, Saeed Tiari pages 367-370 DOI: 10.1615/TFEC2022.est.040895

SORPTION THERMAL ENERGY STORAGE SYSTEMS WITH EMBEDDED MEMBRANES FOR IMPROVED POWER DENSITY Ikechukwu E. Okoh, Sajjad Bigham pages 371-374 DOI: 10.1615/TFEC2022.est.040966

EFFECT OF UNDELIVERED ENERGY AND DYNAMIC DEMAND ON OVERALL DISTRICT ENERGY SYSTEM EFFICIENCY Yongxin Tao, Joseph Woods, Julian Lamb pages 375-379 DOI: 10.1615/TFEC2022.est.041027

Experimental Methods/Tools and Instrumentation in Fluid Mechanics and Heat/Mass Transfer

ROLE OF THERMOPHORESIS ON BINARY PHASE CHANGE MATERIALS FOR THERMAL ENERGY STORAGE Udit Sharma, Jeffrey S. Allen pages 383-389 DOI: 10.1615/TFEC2022.est.040809

WIND TURBINE PERFORMANCE: HANDS-ON PROJECTS FOR CLEAN ENERGY SYSTEMS COURSE Birce Dikici, Jerin Chacko pages 391-394 DOI: 10.1615/TFEC2022.emt.040883

CALCULATION OF INTERFACIAL THERMAL RESISTANCE IN EQUILIBRIUM AND NON-EQUILIBRIUM CONDITIONS BY USING MOLECULAR DYNAMICS SIMULATIONS Xingyu Zhang, Kunio Fujiwara, Masahiko Shibahara pages 395-398 DOI: 10.1615/TFEC2022.emt.041156

A SPECTRAL ANALYSIS OF RELATIONSHIPS BETWEEN OVERALL AND LOCAL THERMAL TRANSPORT ACROSS NANOSTRUCTURED SOLID-LIQUID INTERFACES Kunio Fujiwara, Shogo Nakata, Masahiko Shibahara pages 399-408 DOI: 10.1615/TFEC2022.emt.041157

A CFD SOLVER BASED ON THE LATTICE BOLTZMANN METHOD TO SOLVE THREE-DIMENSIONAL THERMALLY DRIVEN FLOWS AND COUPLED MOLECULAR GAS RADIATION: COMPARISON AND VALIDATION AGAINST A BENCHMARK SOLUTION Félix Schmitt, Frederic Andre, Mathieu Galtier, Etienne Vergnault, Laurent Soucasse, Jerome Jacob, Lucie Merlier pages 409-418 DOI: 10.1615/TFEC2022.emt.041362

THE FREQUENCY VARIATION OF PARTICLE OSCILLATIONS DUE TO TEMPERATURE OF LIQUID IN SPONTANEOUS DISPERSION Sathish Kumar Gurupatham First, Navid Nasajpour Esfahani, Ashton Hensen, Danel Shah pages 419-425 DOI: 10.1615/TFEC2022.emt.040527

COMPARISON AND UNCERTAINTY QUANTIFICATION OF WIND-TUNNEL MEASURED ROOF PRESSURE IN THE PUBLIC AERODYNAMIC DATABASES Erick A. Shelley, Erin. Hubbard, Wei Zhang pages 427-430 DOI: 10.1615/TFEC2022.emt.040900

SPECTROSCOPIC AND PYROMETRIC TEMPERATURE MEASUREMENTS OF HEATED TYPE B AND S THERMOCOUPLES Yuan Yao, Aidin Panahi, Yiannis A. Levendis pages 431-434 DOI: 10.1615/TFEC2022.emt.041211

EXPERIMENTAL INVESTIGATION OF DYNAMIC PERMEABILITY IN OSCILLATING FLOWS Elio Di Giulio, Armando Di Meglio, Raffaele Dragonetti, Nicola Massarotti pages 435-440 DOI: 10.1615/TFEC2022.emt.041272

INTEGRATION OF COMPUTATIONAL FLUID DYNAMICS INTO AN INTRODUCTORY FLUID MECHANICS COURSE Samantha E. Wismer, Lee A. Dosse, Matthew M. Barry pages 441-449 DOI: 10.1615/TFEC2022.emt.040708

CHARACTERIZATION METHODS FOR BIOMASS MATERIALS AND OPTIMIZING HEAT TRANSFER BY USING GENETIC ALGORITHMS Hussein Awad Kurdi Saad, Birce Dikici, Gustavo Villarroel, Eduardo Divo pages 448-451 DOI: 10.1615/TFEC2022.emt.040794

CALCULATION OF RADIATION DISTRIBUTION FACTORS FROM GEOMETRICAL FACTORS J. Robert Mahan, Mehran Yarahmadi pages 453-456 DOI: 10.1615/TFEC2022.emt.040922

Classifying Thermal Conductivity of Fluids with Artificial Neural Networks Andrew C. Jarrett, Ashwin Kodibagkar, Dugan Um, Tae-youl Choi, Denise P. Simmons pages 457-465 DOI: 10.1615/TFEC2022.emt.040940

FLOW INDUCED BY A TWO STAGE EHD GAS PUMP WITH UNEVEN APPLIED VOLTAGES A K M Monayem H. Mazumder, Ajay K. Sah, Shariful A. Robin, Edward M. Tomczyk pages 467-476 DOI: 10.1615/TFEC2022.emt.040987

Flow and Heat Transfer in Biological Systems

ON THE EJECTION SCALE PROBLEM OF EXPIRATORY EVENTS FROM THEORY AND SIMULATIONS Kai Liu, Majid Allahyari, Jorge S. Salinas, Nadim Zgheib, S. Balachandar pages 477-481 DOI: 10.1615/TFEC2022.bio.040908

DEVELOPMENT OF A SINGLE-PHASE BLOOD-MIMICKING FLUID WITH THE RHEOLOGICAL PROPERTIES OF HUMAN BLOOD Ahmed Mahfouz, K. Anoop, Reza Sadr pages 483-493 DOI: 10.1615/TFEC2022.bio.040920

Rheology of Asphalt Binders Modified with Aluminum Oxide Nanoparticles Rahaf Homssi, Ammar Abdalla, K. Lakshmi Roja, Reza Sadr, Eyad Masad pages 495-503 DOI: 10.1615/TFEC2022.bio.040929

CFD SIMULATION AND CHARACTERIZATION OF COUGHS AND SNEEZES: AIRBORNE DROPLET TRANSMISSION TO HUMANS DURING COVID-19 Nazia Afrin, Kenneth Gilley pages 505-524 DOI: 10.1615/TFEC2022.bio.041184

THERMAL IMAGE APPLICATIONS IN ESTIMATION OF FRUIT RIPENESS LEVEL AND CALCULATION OF HUMANBODY HEAT TRANSFER COEFFICIENTS Sathish Kumar Gurupatham First, Navid Nasajpour-Esfahani, Carson L. Wiles, Rajan Rajabalaya pages 525-536 DOI: 10.1615/TFEC2022.bio.041192

PARAMETRIC ANALYSIS OF THE THERMAL ABLATION TREATMENT OF CARDIAC ARRHYTHMIA Eber Dantas, Helcio R. B. Orlande, George S. Dulikravich pages 537-540 DOI: 10.1615/TFEC2022.bio.041205

Fluid Dynamics of Bileaflet Mechanical Heart Valve Leaflets Opening and Closing Phases During Systole and Diastole Fardin Khalili, Peshala P. T Gamage, Richard H. Sandler, Hansen A. Mansy pages 541-549 DOI: 10.1615/TFEC2022.bio.041235

Computational modeling of the interactions of thrombi as a deformable body Fardin Khalili, Eduardo Divo, Alain J. Kassab, William DeCampli pages 551-560 DOI: 10.1615/TFEC2022.bio.041714

Flow and Heat Transfer in Materials Processing Science and Manufacturing

DEVELOPMENT AND INVESTIGATION OF AN ADDITIVELY MANUFACTURED HEAT PIPE Ahmed Elkholy, Jason Durfee, Roger Kempers pages 562-571 DOI: 10.1615/TFEC2022.mpm.041066

HEAT TRANSFER SURFACES MADE OF POLYMERIC HOLLOW FIBERS - FEATURES AND UTILIZATION Miroslav Raudensky, Tereza Kudelova, Erik Bartuli pages 573-581 DOI: 10.1615/TFEC2022.mpm.041778

NUMERICAL DIMENSIONLESS TIME OF STEADY STATE HEAT TRANSFER IN ANISOTROPIC CYLINDRICAL MEDIUM SUBMITTED TO A LATERAL FLUX Rabiaa Idmoussa, Mohammed Nikchi, Nisrine Hanchi, Jawad Lahjomri, Abdelaziz Oubarra pages 583-588 DOI: 10.1615/TFEC2022.mpm.040714

THERMAL ANALYSIS OF PREFORM FABRICATION FOR FLOW MOLD CASTING Jingru Z. Benner, Vedang Chauhan, Rebecca Shannon, Anthony Devita, Jingzhou Zhao pages 589-598 DOI: 10.1615/TFEC2022.mpm.040800

THERMO-VISCOELASTIC PERFORMANCE OF A LIQUID METAL POLYMER COMPOSITE Ashley F. Emery, M. Malakooti pages 599-607 DOI: 10.1615/TFEC2022.mpm.040806

Simulation of Photo-Polymerization in Additive Manufacturing Forooza Samadi, J. Robert Mahan pages 609-614 DOI: 10.1615/TFEC2022.mpm.040921

SUPPORT VECTOR REGRESSION BASED THERMAL PERFORMANCE ASSESSMENT OF PHOTOVOLTAIC PANELS Vikas Kumar, Rojo Kurian Daniels, Monika Agrawal, Amartya Chowdhury, Satyendra Singh Chouhan, Aneesh Prabhakar pages 615-626 DOI: 10.1615/TFEC2022.mpm.041171

Fluid Flow and Heat Transfer in Industrial and Commercial Processes

SIMULATIONS OF A NEW PLATE HEAT EXCHANGERS FOR HIGH-TEMPERATURE AND HIGH-PRESSURE APPLICATIONS Sai Guruprasad Jakkala, Aaron Feinauer, James F. Klausner, Jeorg Petrasch, S. Vengadesan, André Bénard pages 627-632 DOI: 10.1615/TFEC2022.fip.040913

EFFECT OF SURFACE TEXTURE ON PERFORMANCE OF LIQUID-DESICCANT-BASED AIR DEHUMIDIFIERS Masoud Ahmadi, Behnam Ahmadi, Sunilkumar Pinnu, Sajjad Bigham pages 633-636 DOI: 10.1615/TFEC2022.fip.040960

PERFORMANCE CHARACTERIZATION OF ORDERED POROUS VOLUMETRIC SOLAR RECEIVERS Rasoul Bayaniahangar, Sajjad Bigham pages 637-640 DOI: 10.1615/TFEC2022.fip.040964

CHARACTERISTICS OF FLOWS DRIVEN BY TWO-STAGE EHD GAS PUMPS WITH VARIOUS ELECTRODE ALIGNMENTS A K M Monayem H. Mazumder, Feng C Lai pages 641-652 DOI: 10.1615/TFEC2022.fip.041240

Fluid Flow and Heat Transfer Multiphase Phenomena

EFFECT OF THE PACKED-BED GEOMETRY ON THE PERFORMANCE OF DIRECT CONTACT CROSSFLOW CONDENSERS Parnab Saha, Xu Tan, James F. Klausner, André Bénard pages 653-656 DOI: 10.1615/TFEC2022.mpp.040825

ELECTRIC REDESIGN OF WASTEWATER EVAPORATORS USING POROUS CARBON MATERIAL TO MINIMIZE HEAT LOSS DURING EVAPORATION Abdel Zaro, Divya Jaladi, Ethan M. Languri pages 657-666 DOI: 10.1615/TFEC2022.mpp.040846

FROST DEPOSITION IN TURBULENT FLOW OVER A COLD PLATE USING DIRECT NUMERICAL SIMULATION Mahsa Farzaneh, Nadim Zgheib, S. Balachandar, S.A. Sherif pages 667-670 DOI: 10.1615/TFEC2022.mpp.040931

STEADY STATE MULTIPHASE MODELING OF HEAT AND MASS TRANSFER INSIDE TRANSPORT MEMBRANE CONDENSER Saja Al-rifai, Cheng-Xian Lin pages 671-682 DOI: 10.1615/TFEC2022.mpp.040942

DEWATERING OF THIN LIQUID-DESICCANT FILMS CONSTRAINED BY A VAPOR VENTING MEMBRANE: ROLE OF SOLUTION AND AIR TRANSPORT CONDITIONS Behnam Ahmadi, Masoud Ahmadi, Sajjad Bigham pages 683-686 DOI: 10.1615/TFEC2022.mpp.040963

EXPERIMENTAL STUDY OF INTERACTIONS BETWEEN WAKES AND NUCLEATE BOILING IN INTERMITTENT FLOW PATTERNS Xiang Zhang, Alexander S. Rattner pages 687-690 DOI: 10.1615/TFEC2022.mpp.040970

LATERAL MIGRATION OF A MELTING PARTICLE IN A VERTICAL POISEUILLE FLOW Reza Kaviani, Mohammad Naghashnejad, Hamidreza Shabgard pages 691-699 DOI: 10.1615/TFEC2022.mpp.040972

Modeling of Liquid Jet Impingement Heat Transfer on a Rotating Disk: Moving Reference Frame Versus Moving Mesh Corey Klinkhamer, M. Etemadi, K. L. V. Iyer, Ram Balachandar, Ron M. Barron pages 701-704 DOI: 10.1615/TFEC2022.mpp.041224

DEVELOPMENT OF AN APPROXIMATE DECONVOLUTION METHOD FOR CHEMICAL SOURCE MODELING USING HIGH-ORDER DISCRETIZATION SCHEMES Lena Caban, Agnieszka Wawrzak, Artur Tyliszczak pages 705-714 DOI: 10.1615/TFEC2022.mpp.041334

NUMERICAL STUDIES ON THE DRAG COEFFICIENT OF A CONDENSING ELLIPSOIDAL BUBBLE Sampath Bharadwaj Kota, Seik Mansoor Ali, Sreenivas Jayanti pages 715-718 DOI: 10.1615/TFEC2022.mpp.041371

INVERSE HEAT CONDUCTION METHOD TO ESTIMATE THE HEAT FLUX DURING QUENCHING PROCESS Suresh Babu Gopalkrishna, Eckehard Specht pages 719-731 DOI: 10.1615/TFEC2022.mpp.041379

A Systematic Approach for the Optimization of Heat Exchanger Networks Ahmad Fakheri pages 733-743 DOI: 10.1615/TFEC2022.mpp.041592

Fundamentals in Fluid Flow and Heat/Mass and Momentum Transfer

FLUID DYNAMICS AND HEAT TRANSFER FROM NINE SQUARE PRISMS IN SQUARE ARRAY Zhanying Zheng, Md. Mahbub Alam pages 745-748 DOI: 10.1615/TFEC2022.fnd.040236

TURBULENT HEAT TRANSFER FROM SHORT CYLINDERS POSITIONED PARALLEL TO UNIFORM FLOW Majid Molki pages 749-759 DOI: 10.1615/TFEC2022.fnd.040348

ENTROPY GENERATION IN TRANSIENT CONDUCTION-RADIATION HEAT TRANSFER IN A RADIATIVELY PARTICIPATING MEDIUM Shashikant Cholake, Samarjeet Chanda, V V Katti pages 761-768 DOI: 10.1615/TFEC2022.fnd.040464

ANALYZING INDOOR PATHOGEN DISPERSION AND VENTILATION STRATEGIES TO REDUCE THE RISK OF CORONAVIRUS INFECTION Vedant Joshi, Francine Battaglia pages 769-778 DOI: 10.1615/TFEC2022.fnd.040715

NUMERICAL MODELING OF FREEZING WATER DROPLETS Leandro Magalhães, Rúben Meireles, Andre R. R. Silva, Jorge M. M. Barata pages 779-782 DOI: 10.1615/TFEC2022.fnd.040881

NUMERICAL INVESTIGATION OF INCLINED LIQUID JET UNDER CROSS FLOW Robin Kumar, Sudipto Mukhopadhyay pages 783-792 DOI: 10.1615/TFEC2022.fnd.040904

Design Constraints of Branching and Fractal-Like Networks Ahmad Fakheri, Tony Jabbour, Mohamed Abdelmajid pages 793-803 DOI: 10.1615/TFEC2022.fnd.041593

HIGH LEADING EDGE FILM COOLING BLOWING RATIO EFFECT ON THE MAIN STREAM FLOW IN A LINEAR VANE CASCADE Adeola S. Shote, S. A. Aasa, O.B. Olatunde pages 805-807 DOI: 10.1615/TFEC2022.fnd.042114

IMPORTANCE OF TURBULENCE MODEL IN ACCURATE THERMOFLUID PREDICTION OF FLOW THROUGH DIMPLED TUBES Mohammad-Saleh Abdollahpour, Masoud Darbandi, Kazem Mashayekh, Gerry E. Schneider pages 809-818 DOI: 10.1615/TFEC2022.fnd.040722

NUMERICAL APPROACH TO GENERATE HEAT CORRELATIONS FOR THE FLOW THROUGH SMOOTH AND DIMPLED TUBES Masoud Darbandi, Mohammad-Saleh Abdollahpour, Kazem Mashayekh, Gerry E. Schneider pages 819-828 DOI: 10.1615/TFEC2022.fnd.040750

DENDRITIC NETWORK FOR PASSIVE WATER TRANSPORTATION Xuewei Zhang, Sylvie Lorente pages 829-835 DOI: 10.1615/TFEC2022.fnd.040788

Numerical Study on the Breakup of non-Newtonian/Newtonian Compound Droplet Krishna Kant, Raja Banerjee pages 837-843 DOI: 10.1615/TFEC2022.fnd.040891

PARAMETRIC STUDY ON HEAT TRANSFER ENHANCEMENT FROM FLOW PAST A HEATED GROOVED CYLINDER VIA TAGUCHI METHOD Javad Farrokhi Derakhshandeh, Nima Gharib, Mehdi Moayyedian pages 845-852 DOI: 10.1615/TFEC2022.fnd.041084

NUMERICAL INVESTIGATION OF VISCOUS LOSSES IN PIN ARRAY STACK FOR OSCILLATORY FLOWS Armando Di Meglio, Nicola Massarotti pages 853-861 DOI: 10.1615/TFEC2022.fnd.041148

A NUMERICAL STUDY OF NATURAL CONVECTIVE HEAT TRANSFER ACROSS A HORIZONTAL RECTANGULAR ENCLOSURE WITH AN INCLINED COOLED UPPER SURFACE Patrick H. Oosthuizen pages 863-871 DOI: 10.1615/TFEC2022.fnd.041226

Numerical Simulation of a Two-phase Flow Mixer for Liquid Metal Magnetohydrodynamic Generator Zhongtian Liu, Hulin Huang pages 873-882 DOI: 10.1615/TFEC2022.fnd.041277

NUMERICAL STUDY OF STEADY AND UNSTEADY TURBULENT MIXED CONVECTION IN SHEAR DRIVEN CAVITY FLOW Abdullah Naeem, Kazim M. Akyuzlu pages 883-903 DOI: 10.1615/TFEC2022.fnd.041390

EVAPORATION AND MICRO EXPLOSION OF DODECANE −WATER EMULSION DROPLETS Vinod Kumar Naidu P, Madan Mohan Avulapati pages 905-914 DOI: 10.1615/TFEC2022.fnd.040861

THERMODYNAMIC APPROACH TO DETERMINE THE HYDRAULIC AND THERMAL LOSSES IN FLUID FLOW THROUGH TRIANGULAR MINIATURE CHANNELS Rohit Kumar, Manmohan Pandey pages 915-924 DOI: 10.1615/TFEC2022.fnd.040867

THEORETICAL MODELLING OF MINIATURE LOOP HEAT PIPE Chandan Nashine, Manmohan Pandey pages 925-935 DOI: 10.1615/TFEC2022.fnd.040874

PASSIVE TEMPERATURE REDUCTION TECHNIQUES IN ELECTRIC VEHICLE BATTRIES Sohail H. Zaidi, Dipika Rajale, Nicole Okamoto pages 937-946 DOI: 10.1615/TFEC2022.fnd.041383

UNDERSTANDING THE INFLUENCE OF PRESSURE DISTURBANCE ON THE TRANSITION OF STRATIFIED TO SLUG FLOW Pratik Mahyawansi, Cheng-Xian Lin, Arturo S. Leon pages 947-957 DOI: 10.1615/TFEC2022.fnd.040491

Numerical Investigation of Photothermal Membrane Distillation Dheeraj Chamoli, Kapil Garg, Sarit K. Das, Himanshu Tyagi pages 959-968 DOI: 10.1615/TFEC2022.fnd.040647

RADIATION ANALYSIS OF A PARTICLE CURTAIN USING POLYDISPERSE PARTICEL SIZE EULERIAN GRANULAR CFD MODELLING Smitkumar M Patel, Jingjing Chen, Joe Coventry, Wojciech Lipinski, Apurv Kumar pages 969-981 DOI: 10.1615/TFEC2022.fnd.040828

Numerical study of yaw angle and Reynolds number effects on the aerodynamic characteristics of a road vehicle Maziar Mosavati, Ron M. Barron, Ram Balachandar, M. Belalia pages 983-990 DOI: 10.1615/TFEC2022.fnd.040939

Heat/Mass Transfer Enhancement Techniques

AIR GAP MEMBRANE DISTILLATION SYSTEMS WITH A TUNED THERMAL CONDUCTIVITY Shiying Cai, Sajjad Bigham pages 991-994 DOI: 10.1615/TFEC2022.the.040965

CORONA WIND ASSISTED EVAPORATION ENHANCEMENT OF HEAVY HYDROCARBON EVAPORATING FROM MICROLITER WELL CAVITY Digvijay Shukla, Pradipta Kumar Panigrahi pages 995-999 DOI: 10.1615/TFEC2022.the.041146

CFD PREDICTION OF TURBULENT CONVECTIVE HEAT TRANSFER IN ADDITIVE MANUFACTURED ROUGH CHANNELS Mohammadreza Kadivar, David Tormey, Gerard J. McGranaghan pages 1001-1010 DOI: 10.1615/TFEC2022.the.041167

COMPUTATIONAL ANALYSIS OF DIFFUSION FLAMES AROUND VARIOUS SHAPE CONICAL BLUFF-BODIES Agnieszka Wawrzak, Robert Kantoch, Artur Tyliszczak pages 1011-1020 DOI: 10.1615/TFEC2022.the.041330

DEGASSING DISSOLVED OXYGEN THROUGH BUBBLES UNDER A VACUUM CONDITION Jeong-A Hong, Jong-Soo Lee, Yong-Du Jun pages 1021-1033 DOI: 10.1615/TFEC2022.the.041702

Micro/Macro Thermal and Fluid Systems Applications

THE CFD SIMULATION OF COMPLEX TUBE BUNDLES; SPECIAL FOCUS ON TURBULENCE MODEL IMPLEMENTATION Ali Mohammad, Masoud Darbandi, Gerry E. Schneider pages 1035-1042 DOI: 10.1615/TFEC2022.mtf.040917

THE EFFECT OF JOULE HEATING ON THE HEIGHT RISE OF AQUEOUS SOLUTIONS BETWEEN ELECTRODES Gaurav Anand, Samira Safaripour Tabalvandani, Craig Snoeyink pages 1043-1053 DOI: 10.1615/TFEC2022.mtf.040944

Multiphase Flows, Nano and Microfluids

THE INFLUENCE OF LIQUID FILM THICKNESS ON CROWN DEVELOPMENT: CROWN SHEET ANGLE Daniela F. S. Ribeiro, Jorge M. M. Barata, Andre R. R. Silva pages 1055-1058 DOI: 10.1615/TFEC2022.nmm.040786

VALIDATION OF A DYNAMIC MODEL FOR COOLING TOWER ENERGY EFFICIENCY ANALYSIS Spencer L. Jones, Ethan M. Languri pages 1059-1067 DOI: 10.1615/TFEC2022.nmm.040853

DEVELOPING AN AUXILIARY COOLING SYSTEM IN A PELLETIZING PLANT USING THE CAPACITY OF AN AVAILABLE PROCESS FAN Pooya Javadpour-Langroodi, Soheyl Hashemi-Zenoozi, Masoud Darbandi, Mohammad-Bagher Barezban, Mosayeb Emam-Bakhsh, Mahdieh Alimohammadi pages 1069-1076 DOI: 10.1615/TFEC2022.nmm.040896

NANOPARTICLE SIZE EFFECT ON STABILITY OF IONIC LIQUIDS (ILs) BASED NANOFLUIDS Anna A. Hawcroft, Gerald R. Prendergast, Titan C. Paul pages 1077-1085 DOI: 10.1615/TFEC2022.nmm.041195

CONFORMAL MAPS FOR THERMAL SLIP ACCOUNTING FOR LARGE MENISCUS CURVATURE BETWEEN PARALLEL RIDGES Lisa Steigerwalt Lam, Yuri S. Muzychka pages 1087-1099 DOI: 10.1615/TFEC2022.nmm.041289

Multiphase Flows

SUBLIMATION OF NAPHTHALENE SPHERES IN A NATURAL CONVECTION ENVIRONMENT Shane M. Tetreault, Jeffrey G. Marchetta, William S. Janna pages 1101-1117 DOI: 10.1615/TFEC2022.mph.040445

NUMERICAL ANALYSIS OF THE MULTIPHASE FLOW OF THE AERATION PROCESS IN AN AERATED POND Luis Velazquez-Araque, David Álvarez, A. Perero, M. Cárdenas-Calle pages 1119-1128 DOI: 10.1615/TFEC2022.mph.040653

COMPUTATIONAL STUDY OF FORCE BALANCE DURING NUCLEATE BOILING Lubomir Bures, Yohei Sato pages 1129-1138 DOI: 10.1615/TFEC2022.mph.040736

Nano and Micro Fluids Applications

Effect of non-Newtonian Rheology on Bag Breakup at Different Liquid to Gas Density Ratios Krishna Kant, Raja Banerjee pages 1139-1145 DOI: 10.1615/TFEC2022.nma.040888

ADVANCES OF NANOFLUIDS IN THERMOPHYSICAL PROPERTIES - A REVIEW Macduff Mahiyani Khoza, Zhongjie Huan, Thembelani Sithebe, Veeredhi Vasudeva pages 1147-1153 DOI: 10.1615/TFEC2022.nma.040892

PREDICTION OF NANOFLUID THERMAL CONDUCTIVITY Joshua Beck, Jake Wohld, Ryan Fulmer, Saeid Vafaei pages 1155-1163 DOI: 10.1615/TFEC2022.nma.040937

THE IMPACT OF SURFACTANT ON STABILITY AND THERMOPHYSICAL PROPERTIES OF ALUMINIUM DOPED ZINC OXIDE-BASED HYBRID NANOFLUID Zafar Said, Fahad Hassan, Maham Sohail pages 1165-1172 DOI: 10.1615/TFEC2022.nma.041177

NANOFLUID THERMAL CONDUCTIVITY: EFFECTS OF NANOFLUID CHARACTERISTICS Ryan Fulmer, Kevin Apmann, Joshua Beck, Jake Wohld, Saeid Vafaei pages 1173-1181 DOI: 10.1615/TFEC2022.nma.041595

Refrigeration, Air conditioning systems and Multiphase Flows

HEATING LOAD CALCULATIONS IN A MULTI-STORIED EDUCATIONAL BUILDING-PROJECT BASED LEARNING IN HVAC COURSE Aneesha Gogineni, S. B. Abdullah, J. Apel, B. Pokhrel pages 1183-1193 DOI: 10.1615/TFEC2022.ref.040503

CAVITATION EFFECTS ON BUBBLE BREAKUP CHARACTERISTICS IN A VENTURI TUBE Noor Saffreena Hamdan, Akiko Kaneko pages 1195-1203 DOI: 10.1615/TFEC2022.ref.040773

COMPARATIVE PERFORMANCE ASSESSMENT OF MULTI-STAGE ABSORPTION AIR-CONDITIONING UNDER WARM-HUMID CLIMATE Gaurav Singh, Ranjan Das pages 1205-1214 DOI: 10.1615/TFEC2022.ref.040869

MODELLING AND SIMULATING THE MICROCLIMATE OF A MODULAR PLANT GROWTH CHAMBER DESIGNED FOR INDOOR FARMING Jonathan Hey, Tan Jun Liang, Song Bin pages 1215-1221 DOI: 10.1615/TFEC2022.ref.041165

THE EFFECT OF DEWAR OPERATING PRESSURE ON THE THERMAL PERFORMANCE OF LIQUID NITROGEN COOLED CRYOPROBE Anish A. Gunjal, Gulshan Kumar, Atul Srivastava, Milind D. Atrey pages 1223-1226 DOI: 10.1615/TFEC2022.ref.041360

Solar Energy Equipment and Processes

3-STAGE CONTROL OF A VARIABLE-REFRIGERANT-FLOW HEAT PUMP FOR SOLAR DOMESTIC HOT WATER APPLICATIONS Julian C. Howarth, Michael R. Collins pages 1227-1233 DOI: 10.1615/TFEC2022.sol.040678

SEMICONDUCTOR LAYER FOR PHOTOVOLTAIC APPLICATIONS: NANOFLUID BOILING DEPOSITION AND SINTERING STRATEGY Ian Holmes, Ben Errion, Saeid Vafaei, Harshini Vasudevanallur, Concetta Gendusa, Alex Brasel, Trace Decker, Kazuhiro Manseki, Takashi Sugiura pages 1235-1246 DOI: 10.1615/TFEC2022.sol.040685

Investigation Of Improved Heat And Mass Transfer In A Low Thermal Inertia Type Solar Still Pankaj K. Srivastava, S. K. Agrawal pages 1247-1256 DOI: 10.1615/TFEC2022.sol.040790

TRANSIENT MODELLING OF THREE ZONE HEAT EXTRACTION FROM A SALT GRADIENT SOLAR POND Sunirmit Verma, Ranjan Das, Gaurav Singh pages 1257-1266 DOI: 10.1615/TFEC2022.sol.040839

Thermal and Energy Systems

APPLICATION OF THERMAL AND CAVITATION EFFECTS FOR HEAT AND MASS TRANSFER PROCESS INTENSIFICATION IN MULTICOMPONENT LIQUID MEDIA Anatoliy M. Pavlenko, Hanna Koshlak, Borys I. Basok pages 1267-1284 DOI: 10.1615/TFEC2022.tes.040446

CERAMIC 3D-PRINTED HEAT EXCHANGERS FOR HIGH-TEMPERATURE HEAT RECOVERY Behzad Ahmadi, Joseph Cesarano, Kashif Nawaz, Nikolas Ninos, Sajjad Bigham pages 1285-1288 DOI: 10.1615/TFEC2022.tes.040984

NUMERICAL SIMULATIONS OF THE EFFECT OF DIFFERENT CATALYSTS IN A SABATIER MICRO-CHANNEL REACTOR Vinay Chandrakar, Abhilash J. Chandy pages 1289-1297 DOI: 10.1615/TFEC2022.tes.041218

Flow and Heat Transfer in Biological Systems-II

COMPENSATING BUMBLEBEE FLIGHT AERODYNAMICS DUE TO WING WEAR Munjal Shah, Javid Bayandor, Francine Battaglia pages 1299-1302 DOI: 10.1615/TFEC2022.bio-ii.040670

COMPUTATIONAL ANALYSIS OF OXYGEN TRANSPORT IN A LIVERON- A-CHIP PLATFORM Violeta Carvalho, Nelson N.J.O. Rodrigues, Raquel O. Rodrigues, Rui A. Lima, Senhorinha F. C. F. Teixeira pages 1303-1310 DOI: 10.1615/TFEC2022.bio-ii.040844

Advanced Energy and Energy Storage Systems

AN INVERSE IDENTIFICATION OF THE AIR MASS FLOW RATE DISTRIBUTION IN THE AIR CHANNELS OF AN AIR-PCM HEAT EXCHANGER Martin Zalesak, Pavel Charvat, Lubomir Klimes pages 1311-1316 DOI: 10.1615/TFEC2022.ees.040737

AN INVESTIGATION INTO THE EFFECT OF WINDOW TINTING ON THERMAL COMFORT INSIDE OFFICE BUILDINGS Mohamed Salem, Sana El-Azzeh, Farraj Al-Ajmi, Abdulrahman Al-Aqqad, Hajar Al-Khaldi, Shamayel Thaher pages 1317-1325 DOI: 10.1615/TFEC2022.ees.040256

ANALYSIS OF DYNAMIC WATER TRANSPORT IN PEM FUEL CELL GAS DIFFUSION LAYERS USING LONG SHORT TERM MEMORY Jingru Z. Benner, Mehdi Mortazavi, Vedang Chauhan, Oliver K. Philbrick, Anthony D. Santamaria pages 1327-1343 DOI: 10.1615/TFEC2022.ees.040804

EFFECT OF AIR SUPPLY DISTRIBUTION ON THE PERFORMANCE OF A SMALL OPEN TOP REBURN GASIFIER Zeba Naaz, Vipul Vibhanshu, Vineet Kumar, Sangeeta Kohli, M.R. Ravi pages 1345-1354 DOI: 10.1615/TFEC2022.ees.040779

NUMERICAL ANALYSIS OF THE PERFORMANCE OF ATMOSPHERIC WATER HARVESTING SYSTEM Tanuj Singh, Ravi Beniwal, Sarit K. Das, Himanshu Tyagi pages 1355-1364 DOI: 10.1615/TFEC2022.ees.040646

REACTOR SCALE SIMULATION OF ATOMIC LAYER DEPOSITION IN A MULTI-WAFER VISCOUS FLOW REACTOR Betelhiem N. Mengesha, Mohammad Reza Shaeri pages 1365-1368 DOI: 10.1615/TFEC2022.ees.041000

Advanced Energy Systems

EVALUATION OF OPTIMAL BLADE DESIGN AND OPERATION FOR HORIZONTAL AXIS WIND TURBINE Azadeh Sohrabi, John Hall, Francine Battaglia pages 1369-1372 DOI: 10.1615/TFEC2022.aes.040902

NUMERICAL MODELING OF A PROPELLER IN AIR AND WATER ENVIRONMENTS Konstantin I. Matveev pages 1373-1376 DOI: 10.1615/TFEC2022.aes.040642

ON THE STRATIFICATION OF DENSITY AT SUPERCRITICAL LIQUID-LIKE CONDITIONS Leandro Magalhães, Andre R. R. Silva, Jorge M. M. Barata pages 1377-1380 DOI: 10.1615/TFEC2022.aes.040878

OPTIMIZATION METHODS FOR SEGMENTED THERMOELECTRIC GENERATORS Shane P. Riley, Sarah E. Wielgosz, Kevin Yu, Michael J. Durka, Bill J. Nesmith, Fivos Drymiotis, Jean-Pierre Fleurial, Matthew M. Barry pages 1381-1393 DOI: 10.1615/TFEC2022.aes.040925

Waste Heat Recovery via Thermoelectric Generation in a Natural Gas Engine: Numerical Modeling and Baseline Analysis Ratnak Sok, Jin Kusaka, Hisaharu Nakashima, Hidetaka Minagata pages 1395-1404 DOI: 10.1615/TFEC2022.aes.041051