Войти Корзина покупок
Доступ предоставлен для: Guest
Главная Архив Оргкомитет Будущие конференции American Society of Thermal and Fluids Engineering

ISBN : 978-1-56700-472-4 (Flash Drive)

ISBN : 978-1-56700-471-7

3rd Thermal and Fluids Engineering Conference (TFEC)
2018, 4–7 March , Fort Lauderdale, FL, USA

Содержание:

Advanced Energy Systems

CFD MODEL VALIDATION OF THE TURBULENT FLOWS IN PLATE INSERTED PIPES FOR A GROUND-AIR HEAT EXCHANGER APPLICATION Long Phan, E. J. Lee, Soheil Soleimanikutanei, Cheng-Xian Lin pages 1-6 DOI: 10.1615/TFEC2018.aes.022085
EXPERIMENTAL INVESTIGATION OF A WASTE HEAT DRIVEN TURBO-COMPRESSION CHILLER Shane D. Garland, Todd M. Bandhauer, Alex M. Grauberger, John R. Simon III, Derek N. Young, Kevin Eisemann, Robert Fuller, Jeff Noall, Jeff Shull, Ranga V. Sami, Michael J. Reinke, Larry W. Gabbey pages 7-10 DOI: 10.1615/TFEC2018.aes.021617
MODELING OF BLADE COOLING ON THE FIRST TWO TURBINE STAGES AND THE COOLING EFFECT ON THE GAS TURBINE PERFORMANCE Maryam Besharati-Givi, Xianchang Li pages 11-21 DOI: 10.1615/TFEC2018.aes.022325
PARAMETRIC ANALYSIS OF THE THERMAL SHIELDING PERFORMANCE OF A COLD PLATE WITH A SERPENTINE FLOW DESIGN Zijun Wang, Hong Ye pages 23-32 DOI: 10.1615/TFEC2018.aes.022008
RESEARCH ON THE DESIGN IMPROVEMENT OF THERMAL SAFETY IN MULTI-PARALLEL LITHIUM ION BATTERY MODULE Chengchao Yuan, Yang Zhao pages 33-37 DOI: 10.1615/TFEC2018.aes.022504
THERMODYNAMIC ASSESSMENT OF ORGANIC RANKINE CYCLE SYSTEMS DURING OFF-DESIGN OPERATION IN COMBINED HEAT AND POWER (CHP) APPLICATIONS Maria Anna Chatzopoulou, Christos N. Markides pages 39-50 DOI: 10.1615/TFEC2018.aes.021587

Aerospace Applications

A MULTI-PURPOSE UNMANNED AERIAL SYSTEM DESIGN Mohammed S. Mayeed, Franklin Woods, Alexander Bryant pages 51-60 DOI: 10.1615/TFEC2018.asp.021494
EXPERIMENTAL STUDY OF ICE FORMATION ON AN AERONAUTICAL PITOT PROBE Robert Jackel, Geydy Luz Gutiérrez-Urueta, Fidencio Tapia Rodrıguez, Juliana Braga Rodrigues Loureiro, Cintia Monreal Jimenez pages 61-66 DOI: 10.1615/TFEC2018.asp.024485
PROPAGATION OF A DETONATION WAVE IN SUPERSONIC CROSSFLOWS USING A PRE-DETONATOR Jalime Vargas, Jonathan Sosa, Daniel Rosato, Kareem Ahmed pages 67-70 DOI: 10.1615/TFEC2018.asp.021715

CFD

Viscous Compressible Flow Solution using RBF Blended Interpolation Michael F. Harris, Alain J. Kassab, Eduardo Divo pages 71-79 DOI: 10.1615/TFEC2018.cfd.022087
ANALYSIS TO OPTIMIZE THE LOCATION FOR PHASE CHANGE MATERIAL IN BUILDINGS Jyothis Anand Prem Anand Jayaprabha, Patrick E. Phelan pages 81-84 DOI: 10.1615/TFEC2018.cfd.021521
A MULTI-PHYSICS STUDY OF THE EFFECT OF FLUID-THERMO-STRUCTURE INTERACTIONS ON THIN FILM COATINGS UNDER EXTREME ENVIRONMENTS Antoine M.D. Jost, J. Zhang, Pei-Feng Hsu, M.H. McCay pages 85-88 DOI: 10.1615/TFEC2018.cfd.022299
A NEW SCHEME FOR THE DISCRETIZATION OF DIFFUSIVE FLUX ON EXTREMELY SKEWED UNSTRUCTURED MESHES Minghai Xu, Huawen Shu, Liang Gong, Peng Ding, Wenbo Liu pages 89-96 DOI: 10.1615/TFEC2018.cfd.022360
A NUMERICAL STUDY OF NATURAL CONVECTIVE HEAT TRANSFER FROM AN UPWARD FACING CIRCULAR HEATED HORIZONTAL ISOTHERMAL ELEMENT WITH A NON-FLAT SURFACE Patrick H. Oosthuizen pages 97-111 DOI: 10.1615/TFEC2018.cfd.021539
A NUMERICAL STUDY OF NATURAL CONVECTIVE HEAT TRANSFER FROM TWO-SIDED CIRCULAR AND SQUARE HEATED HORIZONTAL ISOTHERMAL PLATES HAVING A FINITE THICKNESS Rafiq Manna, Patrick H. Oosthuizen pages 113-127 DOI: 10.1615/TFEC2018.cfd.021540
A NUMERICAL STUDY ON ACOUSTIC STREAMING AND TISSUE HEATING DURING MAGNETIC RESONANCE GUIDED HIGH INTENSITY FOCUSED ULTRASOUND THROUGH BLOOD VESSEL WITH AN OBSTACLE Md. Abdul Hakim Khan, Salma Parvin, A. Sultana pages 129-141 DOI: 10.1615/TFEC2018.cfd.021810
COUNTER-FLOWING WALL JET Sachin Sharma, Vimaldoss Jesudhas, Ram Balachandar, Ron M. Barron pages 143-146 DOI: 10.1615/TFEC2018.cfd.021696
CFD STUDY OF SUBMERGED TURBULENT OFFSET JETS Vimaldoss Jesudhas, Ram Balachandar, Ron M. Barron pages 147-150 DOI: 10.1615/TFEC2018.cfd.021716
COMBINED EXPLICIT AND IMPLICIT METHODS FOR TIME INTEGRATION IN PARTIAL DIFFERENTIAL EQUATIONS Antonio M. Zarzur, Haroldo F. de Campos Velho, Saulo R. Freitas, Stephan Stephany pages 151-158 DOI: 10.1615/TFEC2018.cfd.021966
COMBUSTION BEHAVIOR OF LUMPY COKE IN PACKED BED IN A COUNTER CURRENT AIR FLOW Bassem Hallak, N. Linn, Eckehard Specht, Fabian Herz pages 159-167 DOI: 10.1615/TFEC2018.cfd.020966
Effects of Reduced Mesh Resolution on Large Eddy Simulations of Atmospheric Boundary Layer Flow Matthew McKenna, Ikramuddin Ahmed, DongHun Yeo pages 169-174 DOI: 10.1615/TFEC2018.cfd.021721
FLOW AND HEAT TRANSFER DYNAMICS IN A CUBICAL ENCLOSURE WITH HOT AND COLD SECTORS ON THE SAME VERTICAL WALL Ramon L. Frederick pages 175-184 DOI: 10.1615/TFEC2018.cfd.021580
FLUID INTERFACE CAPTURING ON PARALLEL ADAPTIVE OCTREE GRIDS M. Wasy Akhtar pages 185-194 DOI: 10.1615/TFEC2018.cfd.022338
MAGNETOHYDRODYNAMIC FLOW IN A TRUNCATED CONICAL ENCLOSURE Brahim Mahfoud, A. Bendjaghloli pages 195-200 DOI: 10.1615/TFEC2018.cfd.024285
MELTING OF A PHASE CHANGE MATERIAL WITH NATURAL CONVECTION AND RADIATION: A SIMPLIFIED MODEL FOR ENGINEERING APPLICATIONS Farah Souayfane, Pascal Henry Biwole, Farouk Fardoun pages 201-210 DOI: 10.1615/TFEC2018.cfd.020822
METHODOLOGY TO IMPROVE FLOW DISTRIBUTION AND DUCT BURNER COMBUSTION IN HEAT RECOVERY STEAM GENERATORS Manuel A. Gonzalez Chapa, R. Salgado Ayala pages 211-221 DOI: 10.1615/TFEC2018.cfd.021670
MICROCHANNEL DEFINITION FOR TWO-PHASE FLOW BOILING: DEFINING A CRITICAL DIMENSION Yvonne Moussy, Arthur David Snider pages 223-231 DOI: 10.1615/TFEC2018.cfd.021191
NUMERICAL INVESTIGATION ON COOLING OF A HEATED PLATE WITH HOT SPOTS USING ELECTROSTATIC AIR ACCELERATORS S. Wang, Jianfei Zhang, L.J. Kong, Zhiguo Qu, Wen-Quan Tao pages 233-244 DOI: 10.1615/TFEC2018.cfd.020884
SCALE-RESOLVING SIMULATIONS OF THE FLOW IN INTERNAL COMBUSTION ENGINES Branislav Basara, Zoran N. Pavlovic, Sinisa Krajnovic pages 245-248 DOI: 10.1615/TFEC2018.cfd.020954
SEMI-ANALYTIC NUMERICAL SOLUTION OF HEAT CONDUCTION PROBLEMS USING GREEN'S FUNCTIONS Forooza Samadi, Keith A Woodbury pages 249-270 DOI: 10.1615/TFEC2018.cfd.021672
TURBULENT HEAT TRANSFER IN A TWO-PHASE CUBICAL HEAT SINK Majid Molki pages 271-281 DOI: 10.1615/TFEC2018.cfd.021457
USE OF WOOD/PHASE CHANGE MATERIAL COMPOSITE IN THE BUILDING ENVELOPE FOR BUILDING THERMAL CONTROL AND ENERGY SAVINGS Aravind Reddy Boozula, Weihuan Zhao, Liping Cai, Sheldon Q. Shi pages 291-300 DOI: 10.1615/TFEC2018.cfd.021642

Combustion, Fire and Fuels

A NON-THERMAL GLIDING ARC PLASMA REFORMER FOR SYNGAS PRODUCTION Howard Pearlman, Max Demydovych, Alex Rabinovich, Shridhar Shenoy pages 301-308 DOI: 10.1615/TFEC2018.cbf.022074
FEEDSTOCK EFFECT ON BIOMASS TORREFACTION: A COMPARATIVE ASSESSMENT OF WILLOW AND BEECH TORREFACTION Yousef Haseli pages 309-316 DOI: 10.1615/TFEC2018.cbf.021690
LAMINAR BURNING SPEED OF PROPANE/CO2/AIR MIXTURES AT ELEVATED PRESSURES AND TEMPERATURES Sai C. Yelishala, Ziyu Wang, Hameed Metghalchi, Yiannis A. Levendis pages 317-320 DOI: 10.1615/TFEC2018.cbf.021955

Computational and Experimental Studies on Thermofluid Systems

A LOW COST, FLEXIBLE PULSATING HEAT PIPE TECHNOLOGY Oguzhan Der, Marco Marengo, Volfango Bertola pages 321-327 DOI: 10.1615/TFEC2018.ces.021455
BUBBLE DYNAMICS IN POOL BOILING ON ROUGH SURFACE UNDER EXPONENTIAL HEAT SUPPLY Avdhoot A. Walunj, Alangar Sathyabhama pages 329-337 DOI: 10.1615/TFEC2018.ces.021676
CFD ANALYSIS ON FLOW CHARACTERISTICS OF PERFORATED PLATE IN MULTI-STAGE HIGH PRESSURE REDUCING VALVE Fu-qiang Chen, Jin-yuan Qian, Zhi-jiang Jin pages 339-351 DOI: 10.1615/TFEC2018.ces.021948
EXPERIMENTAL ESTIMATION OF A HEAT FLUX IMPOSED BY A LASER DIODE WITH THE STEADY STATE KALMAN FILTER Henrique da Fonseca, César C. Pacheco, Helcio R. B. Orlande, Olivier Fudym, George S. Dulikravich pages 353-365 DOI: 10.1615/TFEC2018.ces.020899
RECOVERING THERMAL CONTACT CONDUCTANCES IN THREE–DIMENSIONAL LAYERED MATERIALS VIA RECIPROCITY FUNCTIONAL ANALYSIS AND TSVD REGULARIZATION TECHNIQUE Camila R. de Lacerda, Marcelo Jose Colaco pages 367-376 DOI: 10.1615/TFEC2018.ces.020922

Computational Methods/Tools in Thermal-Fluid Systems

ASSESSING THE PERFORMANCE OF THREE DIFFERENT TYPE OF DIFFUSERS FOR A CENTRIFUGAL COMPRESSOR APPLICATIONS Mekuannint Messele, Abraham E. Engeda pages 377-390 DOI: 10.1615/TFEC2018.cmd.021415
CFD analysis of thermal hydraulic behavior in moderator of PHWR Jin-Hyuck Kim, Ae-Ju Cheong pages 391-394 DOI: 10.1615/TFEC2018.cmd.021497
CFD MODELLING AND VALIDATION OF LOSS COEFFICIENTS FOR PENSTOCK BIFURCATIONS IN HYDROPOWER SCHEMES Kasturi Sukhapure, Alan Burns, Tariq Mahmud, Jake Spooner pages 395-406 DOI: 10.1615/TFEC2018.cmd.021574
DETERMINATION OF WET-BULB TEMPERATURE AND RELATIVE HUMIDITY OF REDUCED AMBIENT PRESSURE ENVIRONMENT: COMPUTER SIMULATION AND RAINBOW THERMOMETRY VALIDATION Parida Losangwal, Pumyos Vallikul, Songrit Tanchatchawan pages 407-415 DOI: 10.1615/TFEC2018.cmd.021664
DEVELOPING REDUCED KINETICS USING CHEMICAL REACTOR NETWORKS AND SENSITIVITY ANALYSIS Lu Chen, Francine Battaglia pages 417-420 DOI: 10.1615/TFEC2018.cmd.022389
EFFECTS OF MERIDIONAL SHAPE ON HYDRAULIC AND SUCTION PERFORMANCE OF A HIGH SPECIFIC SPEED CENTRIFUGAL PUMP Hyeon-Seok Shim, Kwang-Yong Kim pages 421-428 DOI: 10.1615/TFEC2018.cmd.021436
HEAT TRANSFER ENHANCEMENT IN A HEAT EXCHANGER HAVING TWO ROWS OF ROUND TUBES AND SLIT FINS USING VORTEX GENERATORS Ruben Borrajo Perez, Juan J. Gonzalez, Alberto. M. Pérez pages 429-441 DOI: 10.1615/TFEC2018.cmd.020940
HEAT-SOURCE DRIVEN CONVECTION IN TALL CAVITIES Thomas H. Reif, A.A. Shabayek, Francis Kulacki pages 443-454 DOI: 10.1615/TFEC2018.cmd.021930
MICRO MOLD COOLING OPTIMIZATION USING A CONSTRUCTAL APPROACH Miguel R. Clemente, Miguel R. Oliveira Panão pages 455-466 DOI: 10.1615/TFEC2018.cmd.020968
Multi-objective Optimization for a Free-piston Vuilleumier Heat Pump Based on an Evolutionary Algorithm Hanfei Chen, Jon P. Longtin, ChihChieh Lin pages 467-474 DOI: 10.1615/TFEC2018.cmd.021665
NUMERICAL ANALYSIS OF THE INFLUENCE OF THE NUMBER OF LOUVERS FINS OF A COMPACT HEAT EXCHANGER Alberto. M. Pérez, Ruben Borrajo Perez, Juan J. Gonzalez pages 475-489 DOI: 10.1615/TFEC2018.cmd.020936
NUMERICAL INVESTIGATION OF IMPINGING HEAT TRANSFER AND FLUID FLOW DUE TO A TURBULENT ANNULAR JET Farhana Afroz, Muhammad Ali Rob Sharif pages 491-502 DOI: 10.1615/TFEC2018.cmd.020958
NUMERICAL INVESTIGATION ON AERODYNAMIC DRAG REDUCTION OF A ROAD VEHICLE Deepanjali Deepanjali, JIe Cui pages 503-514 DOI: 10.1615/TFEC2018.cmd.021568
NUMERICAL SIMULATION OF ATOMIZATION AND MIXING AT A GAS-LIQUID INTERFACE Carlton P. Adam, Hamid Hadim pages 515-524 DOI: 10.1615/TFEC2018.cmd.021689
NUMERICAL SIMULATION OF STRATIFIED OIL-WATER FLOW USING INTERFOAM Gustavo Bochio, Oscar M. Hernandez Rodriguez pages 525-528 DOI: 10.1615/TFEC2018.cmd.022049
NUMERICAL STUDY ON AERODYNAMIC LOSS OF A TURBINE BLADE WITH FILM COOLING OF FORWARD AND BACKWARD INJECTIONS Anil Prajapati, Xianchang Li pages 529-542 DOI: 10.1615/TFEC2018.cmd.022324
PARTIALLY-AVERAGED NAVIER-STOKES SIMULATIONS IN ENGINEERING FLOWS Sinisa Krajnovic, A. Rao, Guglielmo Minelli, J. Zhang, Branislav Basara pages 543-546 DOI: 10.1615/TFEC2018.cmd.021221
SENSITIVITY OF THERMAL CONDUCTIVITY CALCULATIONS IN SILICON TO ERRORS IN INTERATOMIC FORCES Casey N. Brock, Matthew D. Gerboth, Michael Fields, D. Greg Walker pages 547-550 DOI: 10.1615/TFEC2018.cmd.022114
SIMULATION OF THE RAYLEIGH−BENARD CONVECTION IN A FINNED CAVITY FILLED WITH LIQUID GALLIUM Emel Evren Selamet, A. Selamet, R. Dehner pages 551-560 DOI: 10.1615/TFEC2018.cmd.021682
TRANSIENT PERFORMANCE OF CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR FILTER CANISTERS Samuel G. A Wood, Nilanjan Chakraborty pages 561-570 DOI: 10.1615/TFEC2018.cmd.021507
TURBULENT COLD FLOW ANALYSIS OF SPARK IGNITION ENGINE Muhammad Farooq, Uddin Emad, Aamir Mubashar, Samiur Rehman Shah pages 571-583 DOI: 10.1615/TFEC2018.cmd.022778
Void Fraction Distribution and Mass/Energy Transfer Characteristics in Rod Bundle Jun-Yi Zhang, Xiao Yan, Ze-Jun Xiao, Yong-Ze Xu pages 585-594 DOI: 10.1615/TFEC2018.cmd.022201

Electric, Magnetic, Flow and Thermal Phenomena in Micro and Nano-Scale Systems

Optimization of Microchannel Systems under Pressure and Temperature Constraints Xiaobing Zhang, Yogesh Jaluria pages 595-608 DOI: 10.1615/TFEC2018.emp.021650
WATER-IN-AIR DROPLET GENERATION IN A T-JUNCTION GEOMETRY M. Mastiani, S. Seo, Myeongsub (Mike) Kim pages 609-620 DOI: 10.1615/TFEC2018.emp.021433

Energy and Sustainability

A core-shell structured PCM with Na2SO4 encapsulated by SiO2 for high temperature thermal storage Xiaodong Wu, Maohong Fan, Xiaodong Shen, Gang Tan pages 621-624 DOI: 10.1615/TFEC2018.ens.022311
AIR ENTRAINMENT DUE TO A PLUNGING FREE-SURFACE FLOW L. Enrique Ortiz-Vidal, Oscar M. Hernandez Rodriguez pages 625-629 DOI: 10.1615/TFEC2018.ens.020629
DEMAND RESPONSIVE SOLAR-POWERED INTEGRATED COOLING, HEATING AND HOT-WATER SYSTEM Hamidreza Shabgard, Li Song, Weiwei Zhu pages 631-641 DOI: 10.1615/TFEC2018.ens.021723
DROPWISE CONDENSATION ON HYDROPHOBIC MICROPOROUS POWDER AND THE TRANSITION TO INTRAPOWDER DROPLET REMOVAL Sean H. Hoenig, Richard W. Bonner III pages 643-653 DOI: 10.1615/TFEC2018.ens.020457
EXPERIMENTAL INVESTIGATION OF THE EFFECTS OF NANOFLUID CHARACTERISTICS ON THERMAL CONDUCTIVITY Sarah Simpson, Saeid Vafaei pages 655-666 DOI: 10.1615/TFEC2018.ens.020656
METHODS OF ENERGY EFFICIENCY IN COMPRESSED AIR, REFRIGERATION SYSTEMS AND THEIR FINANCIAL IMPACTS Anderson Reis pages 667-674 DOI: 10.1615/TFEC2018.ens.021552
MONTE CARLO SIMULATION OF COLLIMATED SOLAR ENERGY ALLOCATION IN A WATER-FILLED PRISMATIC LOUVER Yaomin Cai, Zhixiong Guo, Nicholas Madamopoulos pages 675-687 DOI: 10.1615/TFEC2018.ens.020752
NOVEL CONCEPT OF FLUIDIZED BED MUFFLER WITH HEAT RECOVERY Helen Skop, Rahim Sajwani, Daria Chudnovsky, Elliot Alexander pages 689-694 DOI: 10.1615/TFEC2018.ens.023172
Performance Evaluation of the Steam Power Plant Condenser Cooled by a Vapor Compression Refrigeration System Using Aspen Yahya Rothan, Khalid Yousef, Abraham E. Engeda pages 695-708 DOI: 10.1615/TFEC2018.ens.021025

Energy-Water-Food Nexus

EFFECT OF CHANGES IN INPUT PARAMETERS ON THE OPERATION OF A MED-TVC PLANT Mohamed L. Elsayed, Osama Mesalhy, Ramy H. Mohammed, Louis C. Chow pages 709-723 DOI: 10.1615/TFEC2018.ewf.021614
EVAPORATION FROM POROUS MEDIA: SINGLE HYDROPHOBIC AND HYDROPHILIC PORES Ryan Huber, Xi Chen, Melanie M. Derby pages 725-732 DOI: 10.1615/TFEC2018.ewf.020972
INNOVATIVE THERMAL DISTILLATION METHOD USING SOLAR HEAT LOCALIZATION Divya Jaladi, Ethan Languri, Kashif Nawaz, Glenn Cunningham pages 733-737 DOI: 10.1615/TFEC2018.ewf.024441
Nucleating agent enhanced thermal desalination at the triple point Fangyu Cao, Ryan Zelinsky, Jianjian Wang pages 739-745 DOI: 10.1615/TFEC2018.ewf.021246

Engineering Equipment and Environmental Systems

AN OVERVIEW OF VARIABLE APERTURE MECHANISMS IN ATTEMPT TO CONTROL TEMPERATURE INSIDE SOLAR CAVITY RECEIVERS Cédric Ophoff, Hamed Najafabadi, J. Bogaerts, Nesrin Ozalp, David Moens pages 747-758 DOI: 10.1615/TFEC2018.env.022450
ASSESSMENT OF BLENDS OF HYDROCARBONS AND CO2 AS ALTERNATIVE NATURAL REFRIGERANTS Sai C. Yelishala, Xiao Ma, Ziyu Wang, Yiannis A. Levendis, Hameed Metghalchi pages 759-762 DOI: 10.1615/TFEC2018.env.021958
DESIGN AND EXPERIMENTAL TESTING OF A CARBON FEEDER FOR A SOLAR THERMAL RECEIVER Lohengrin Van Belle, Sven Van Rompay, M. Helal Uddin, Nesrin Ozalp, Jozef Vleugels pages 763-777 DOI: 10.1615/TFEC2018.env.024512
Design of Data Center Free-Space Optical network: Optical and Mechanical Considerations Kai Zheng, Max Curran, Himanshu Gupta, Jon P. Longtin pages 779-784 DOI: 10.1615/TFEC2018.env.022075
DEVELOPMENT OF P- PD- AND PID-FUZZY SISO CONTROLLERS OF A SUB-SCALED MULTI-ROOM BUILDING TEST-BED J. Baltazar, A. Yarian, Arturo Pacheco-Vega pages 785-795 DOI: 10.1615/TFEC2018.env.021805
EFFECT OF MASS FLOW RATE ON DESIGN OF PRIMARY HEAT EXCHANGER Sunil Lee, Sung Uk Ryu, Sung-Jae Yi pages 797-800 DOI: 10.1615/TFEC2018.env.022098
FALLING-FILM THERMOSYPHONS FOR POWER-PLANT APPLICATIONS: MODELING AND LAB-SCALE EXPERIMENT Tao He, Wei Zhong, Sean Hardick, Rebecca Trojanowski, Tom Butcher, Timothy Wagner, Yaroslav Chudnovsky, William Worek, Jon P. Longtin pages 801-809 DOI: 10.1615/TFEC2018.env.021766

Engineering Fundamentals and Methodology

MODELING OF FROST GROWTH ON SURFACES WITH VARYING CONTACT ANGLE Ellyn Harges, Lorenzo Cremaschi pages 811-822 DOI: 10.1615/TFEC2018.efm.020908
NUMERICAL STUDY OF THE DISTANCE BETWEEN TWO PARTICLES EFFECT ON SWEEPING CONVECTION IN A STRAIGHT ISOTHERM CHANNEL Amir Kiaee, Nathan Crowe, Jose' L. Lage pages 823-831 DOI: 10.1615/TFEC2018.efm.021709
Theoretical Analysis of Miniature Ejector Refrigeration Powered by Thermoelectric Cooler Baffoe Obeng, Hongbin Ma pages 833-843 DOI: 10.1615/TFEC2018.efm.021628

Experimental Methods/Tools and Instrumentation in Fluid Mechanics and Heat/Mass Transfer

THERMAL INVESTIGATION OF A GDI MULTI-HOLE SPRAY IMPACT ON A HEATED THIN FOIL Mattia Contino, Alessandro Montanaro, Luigi Allocca, Gennaro Cardone pages 845-848 DOI: 10.1615/TFEC2018.emt.021990

Flow and Heat Transfer in Materials Processing Science and Manufacturing

DEVELOPING HIGH-TEMPERATURE WATER-REPELLENT GLASS FIBER CLOTHS THROUGH ATOMIC LAYER DEPOSITION Mohammad Reza Shaeri, Dongsheng Guan, Fangyu Cao, Chris Yingchun Yuan pages 849-852 DOI: 10.1615/TFEC2018.flp.021804
LASER-ASSISTED ADDITIVE MANUFACTURING OF BI2TE3-BASED THERMOELECTRIC MODULES Tao Zhang, Sanjay Sampath, Jon P. Longtin, David J. Hwang pages 853-858 DOI: 10.1615/TFEC2018.flp.021750
NUMERICAL SIMULATION AND OPTIMIZATION OF GALLIUM NITRIDE GROWTH IN MOCVD MANUFACTURING PROCESS Omar Jumaah, Yogesh Jaluria pages 859-873 DOI: 10.1615/TFEC2018.flp.021649
PREDICTING HEAT TRANSFER RATES FOR INDUSTRIAL SCALE QUENCH TANKS Jeffrey Franklin, Andrew L. Banka pages 875-884 DOI: 10.1615/TFEC2018.flp.020751

Flow in Internal Multiphase Flows

Characterization of flow regimes in two phase flow using wavelet analysis Munzarin Morshed, Syed Imtiaz, Mohammad Azizur Rahman pages 885-892 DOI: 10.1615/TFEC2018.flm.021701
VOID FRACTION IN A NOVEL MICROBUBBLE-ENHANCED GASLIQUID MIXER Simon Kleinbart, Dinesh V. Kalaga, Masahiro Kawaji pages 893-896 DOI: 10.1615/TFEC2018.flm.022077

Flow Instability

CRITICAL FLOW VELOCITY FOR COLLAPSE OF A CLAMPED-CLAMPED PIPE CONVEYING GAS-LIQUID FLOW David Castillo, L. Enrique Ortiz-Vidal, Quino Valverde pages 897-900 DOI: 10.1615/TFEC2018.fli.021601
PALLIATIVE COUNTERMEASURES FOR THE DRAFT TUBE SURGE IN HYDROPOWER PLANTS: A state-of-the art review. Wen-Tao Su, Alexis Muhirwa, Feng-Chen Li, Wei-Hua Cai, Maxime Binama pages 901-914 DOI: 10.1615/TFEC2018.fli.024468
EXPERIMENTAL PARAMETERS IDENTIFICATION OF A FLEXIBLE CYLINDER UNDERGOING VORTEX-INDUCED VIBRATIONS Cintia Monreal-Jimenez, Francisco Oviedo-Tolentino, Geydy Luz Gutierrez-Urueta, Ricardo Romero-Mendez, Robert Jackel pages 915-922 DOI: 10.1615/TFEC2018.fli.024484

Fluid Flow and Heat Transfer in Industrial and Commercial Processes

ANALYSIS OF CONTINUOUS CASTER FLOW PATTERN VARIATIONS RELATING TO ARGON INJECTION Bangju Chen, Matthew T. Moore, Joseph Trimble, Ken Morales, Armin Silaen, Chenn Q. Zhou pages 923-934 DOI: 10.1615/TFEC2018.fip.021602
CFD ANALYSIS OF SPRAY NOZZLE ARRANGEMENTS FOR MULTI EFFECT DESALINATION EVAPORATOR Furqan Tahir, Abdelnasser A. Mabrouk, Muammer Koc pages 935-941 DOI: 10.1615/TFEC2018.fip.021685
CHARACTERIZATION OF THE THERMAL RESPONSE OF ENERGETIC MATERIAL IN ISO SHIPPING CONTAINER STORAGE Kenneth D. Blecker, Hamid Hadim pages 943-957 DOI: 10.1615/TFEC2018.fip.021693
DROPLET DEFORMATION AFTER IMPACT ON CYLINDRICAL OUTER SURFACE Yali Guo, Yaoxuan Feng, Luyuan Gong, Shengqiang Shen pages 959-967 DOI: 10.1615/TFEC2018.fip.022287
OPTIMAL TUNDISH DEISGN USING OPENFOAM Prateek Singh, Dilshad Ahmad pages 969-972 DOI: 10.1615/TFEC2018.fip.022059
SYSTEM-LEVEL OPTIMIZATION OF FAN-SUPPLIED TUBE-FIN EVAPORATORS FOR FROSTING CONDITIONS Rafael S. Ribeiro, Christian J. L. Hermes, Diogo L. da Silva pages 973-976 DOI: 10.1615/TFEC2018.fip.021474
THERMODYNAMIC OPTIMIZATION OF HORIZONTAL MULTICHANNEL GROUND HEAT EXCHANGER Mayameen N. Reda, Titan C. Paul, Rajib Mahamud pages 977-984 DOI: 10.1615/TFEC2018.fip.021677

Fluid Flow and Heat Transfer Multiphase Phenomena

A COMBINED EXPERIMENTAL AND COMPUTATIONAL STUDY OF THE HEAT TRANSFER CHARACTERISTICS OF FALLING LIQUID-FILMS Alexandros Charogiannis, Fabian Denner, Berend G. M. van Wachem, Serafim Kaliadasis, Christos N. Markides pages 985-994 DOI: 10.1615/TFEC2018.fmp.021505
A NONEQUILIBRIUM MOLECULAR DYNAMICS SIMULATION ON THE CONDENSATION RATE OF ARGON T. B. Wang, Y. S. Zhou, Min Chen pages 995-1006 DOI: 10.1615/TFEC2018.fmp.024312
CRITICAL HEAT FLUX ON LASER-TEXTURED SURFACE IN VERTICAL FLOW BOILING Joseph L. Bottini, Vineet Kumar, Sabrina Hammouti, David Ruzic, Caleb S. Brooks pages 1007-1017 DOI: 10.1615/TFEC2018.fmp.024250
EXPERIMENTAL STUDY OF HEAT TRANSFER DURING QUENCHING OF A HEATED ROD Turki K. Almudhhi, Shikha A. Ebrahim, Fan Bill Cheung pages 1019-1031 DOI: 10.1615/TFEC2018.fmp.025089
EXPERIMENTAL STUDY ON CONDENSATION HEAT TRANSFER OF STEAM IN HORIZONTAL TUBE Yaoxuan Wang, Shengqiang Shen, Xingsen Mu, Weihao Chen pages 1033-1042 DOI: 10.1615/TFEC2018.fmp.024472
EXPERIMENTAL STUDY ON FLOW AND HEAT TRANSFER IN POROUS MEDIA Ping Wang, Zhang Zhang, Yihan Luo , Shengqiang Shen, Jinpeng LV , Bingchen Yu , Xingwang Tian pages 1043-1051 DOI: 10.1615/TFEC2018.fmp.021904
Experimental study on the effect of step-changing heating on water flow boing in a horizontal long mini-channel Q. Huang, Li Jia, L. Yang, X. Zhang, C. Dang pages 1053-1069 DOI: 10.1615/TFEC2018.fmp.021342
THE EFFECT OF INCLINATION ON PRESSURE DROP IN A TWO-PHASE (GAS-LIQUID) PIPE SYSTEM Noble C. Anumbe, Nabeel M. Abdulrazzaq, Jamil A. Khan pages 1071-1083 DOI: 10.1615/TFEC2018.fmp.021711

Fluid Flow/Heat Transfer in Biosystems

Computational Analysis of Inspiratory and Expiratory Flow in the Lung Airway Peshala P. T Gamage, Fardin Khalili, Azad Md. K, Hansen A Mansy pages 1083-1086 DOI: 10.1615/TFEC2018.bio.021629
COMPUTATIONAL INVESTIGATION OF PATIENT-SPECIFIC SELF-POWERED FONTAN CIRCULATIONS Marcus W. Ni, Ray O. Prather, Kyle Beggs, Giovanna Rodriguez, Rachel Quinn, Eduardo Divo, Mark Fogel, Alain J. Kassab, William M. DeCampli pages 1087-1101 DOI: 10.1615/TFEC2018.bio.024756
Effect of chemical reaction on Jeffrey fluid model of blood flow through tapered artery with thermo-diffusion and diffuso-thermal gradients Bhupendra K. Sharma, Madhu Sharma, R. K. Gaur pages 1103-1115 DOI: 10.1615/TFEC2018.bio.022113
Numerical Modeling of Pulse Wave Propagation in a Stenosed Artery using Two-Way Coupled Fluid Structure Interaction (FSI) Peshala P. T Gamage, Fardin Khalili, Hansen A Mansy pages 1117-1125 DOI: 10.1615/TFEC2018.bio.021647
NUMERICAL STUDY OF HEAT TRANSFER IN LIVING TISSUES DURING HYPERTHERMIA TREATMENT OF CANCER Kinjalkumar Chauhan, Saeed Tiari, Mahboobe Mahdavi pages 1127-1130 DOI: 10.1615/TFEC2018.bio.022013
PARAMETRIC SIMULATED STUDY OF HIGH INTENSITY FOCUSED ULTRASOUND (HIFU) FOR TREATMENT OF CANCER Laura de los Ríos, Leonardo A. Bermeo Varon, Wagner Coelho de Albuquerque Pereira pages 1131-1134 DOI: 10.1615/TFEC2018.bio.021734
Prediction of Turbulent Shear Stresses through Dysfunctional Bileaflet Mechanical Heart Valves using Computational Fluid Dynamics Fardin Khalili, Peshala P. T Gamage, Hansen A Mansy pages 1135-1143 DOI: 10.1615/TFEC2018.bio.022070
PULSATILE MULTI-SCALE FLUID STRUCTURE INTERACTION MODELING FOR OPTIMAL LEFT VENTRICULAR ASSIST DEVICE IMPLANTATION Ray O. Prather, Marcus W. Ni, Eduardo Divo, Alain J. Kassab, William M. DeCampli pages 1145-1154 DOI: 10.1615/TFEC2018.bio.024758
THE EVOLUTION OF UNSTEADY FLOW STRUCTURES IN THE WAKE OF FLAPPING BIRD: EXPERIMETNAL AND NUMERICAL ANALYSIS K. Krishnamoorthy, I. Naqavi, Roi Gurka pages 1155-1158 DOI: 10.1615/TFEC2018.bio.022536
The Influence of the Aortic Root Geometry on Flow Characteristics of a Bileaflet Mechanical Heart Valve Fardin Khalili, Peshala P. T Gamage, Hansen A Mansy pages 1159-1165 DOI: 10.1615/TFEC2018.bio.021666

Fluid Measurements and Instrumentation

Evaluation of Several Types of High Temperature Heat Transfer Fluids for Concentrated Solar Power System Ye Zhang, Yuanyuan Li, Peiwen Li pages 1167-1180 DOI: 10.1615/TFEC2018.fmi.021710
THE KEY ROLE OF PUMPING POWER IN ACTIVE COOLING SYSTEMS Mohammad Reza Shaeri pages 1181-1184 DOI: 10.1615/TFEC2018.fmi.021802

Fluid Mechanics and Rheology of Nonlinear Materials and Complex Fluids

ICING STUDY OF SUPER COOLED WATER DROPLET IMPINGING ON AIRFOIL USING E-MPS METHODD Daiki Toba, Hiroya Mamori, Naoya Fukushima, Makoto Yamamoto pages 1185-1191 DOI: 10.1615/TFEC2018.rhe.021654
RHEOLOGICAL ANALYSIS OF CELL EMBEDDED HYDROGEL BIO-INK FOR EXTRUSION BIOPRINTING Prabhuti Kharel, Rahmatul Mahmoud, Kunal Mitra pages 1193-1196 DOI: 10.1615/TFEC2018.rhe.021751

Fundamentals in Fluid Flow and Heat/Mass and Momentum Transfer

ANALYTICAL STUDY OF STAGNATION PROPERTIES OF RAREFIED JET FLOW OF ANNULAR EXIT IMPINGE ON A DIFFUSED FLAT PLATE WITH DIFFERENT KNUDSEN NUMBERS Khaleel Al Khasawneh pages 1197-1205 DOI: 10.1615/TFEC2018.fnd.024345
BREAKUP AND WRAPPING OF FREE SURFACE WITHIN A LATERALLY OSCILLATING CONTAINER: EFFECT OF MULTIMODAL EVOLUTION OF SURFACE ENERGY Naushita Sharma, Kaustav Chaudhury, P. Kaushik, Suman Chakraborty pages 1207-1213 DOI: 10.1615/TFEC2018.fnd.021868
HYDRODYNAMIC AND HEAT TRANSFER CHARACTERISTICS OF SPREADING-SPLASHING TRANSITION UPON DROPLET TRAIN IMPINGEMENT Jayaveera Pandian Muthusamy, Taolue Zhang, Jorge L. Alvarado, Anoop Kanjirakat, Reza Sadr pages 1215-1224 DOI: 10.1615/TFEC2018.fnd.021623
LOCAL STABILITY ANALYSIS FOR OPTIMAL PERFORMANCE OF AN ENDOREVERSIBLE CARNOT REFRIGERATOR WITH LINEAR PHENOMENOLOGICAL HEAT TRANSFER LAW Lingen Chen, Xiaohui Wu, Shaojun Xia, Huijun Feng pages 1225-1234 DOI: 10.1615/TFEC2018.fnd.020742
Pressure Drop Analysis Between a Straight Pipe Array and Branching Pipe System Ahmad Fakheri, Michael Chang pages 1235-1238 DOI: 10.1615/TFEC2018.fnd.022692

General Thermodynamics, Fluid, and Heat Transfer

DIRECT NUMERICAL SIMULATION OF BOUNDARY LAYER ON FLAT PLATE WITH VORTEX GENERATOR FOR HEAT TRANSFER ENHANCEMENT Shihoko Endo, Kaoru Iwamoto, Akira Murata pages 1239-1243 DOI: 10.1615/TFEC2018.tfh.021640
DYNAMIC UNSTRUCTURED MESH ADAPTIVITY FOR IMPROVED SIMULATION OF GEOTHERMALWATER EXTRACTION IN RESERVOIR-SCALE MODELS Pablo Salinas, Qinghua Lei, C. Jacquemyn, Dimitrios Pavlidis, Z. Xie, Christopher C. Pain, Matthew D. Jackson pages 1245-1248 DOI: 10.1615/TFEC2018.tfh.020897
ENTROPY GENERATION MINIMIZATION FOR ONE-WAY ISOTHERMAL MASS TRANSFER PROCESSES WITH MASS LEAKAGE Shaojun Xia, Lingen Chen, Huijun Feng pages 1249-1259 DOI: 10.1615/TFEC2018.tfh.020744
THE INFLUENCE OF OPERATING PARAMETERS ON THE TEMPERATURE DISTRIBUTION IN FLIGHTED ROTARY DRUMS Jakob Seidenbecher, Fabian Herz, Eckehard Specht, S. Wirtz, A. Berndt, V. Scherer pages 1261-1270 DOI: 10.1615/TFEC2018.tfh.020944
Numerical Investigation of Dissolution Reaction between UO2 and Molten Zry-4 using MPS method Yonglin Li, Ronghua Chen, Wenxi Tian, Suizheng Qiu, G. H. Su pages 1271-1283 DOI: 10.1615/TFEC2018.tfh.021950
NUMERICAL STUDY ON TRANSIENT MIXED CONVECTION AND ENTROPY GENERATION IN AN SKEWED VENTILATED ENCLOSURE Neha Gupta, A. K. Nayak pages 1285-1295 DOI: 10.1615/TFEC2018.tfh.020734
OPEN CELL METAL FOAM HEAT EXCHANGERS FOR AIR-DEHUMIDIFICATION APPLICATIONS Kashif Nawaz, Anthony M. Jacobi pages 1297-1301 DOI: 10.1615/TFEC2018.tfh.020802
THERMAL ANALYSIS OF POWER ELECTRONIC BUILDING BLOCK-BASED CONVERTER ARRAY Tomas Solano, Kourosh Shoele, Juan Ordonez pages 1303-1308 DOI: 10.1615/TFEC2018.tfh.022469
OUT-OF-PLANE T-SHAPED CONSTRUCTAL-THEORY CONDUCTING PATHS: ALTERNATIVE FOR EXPERIMENTAL EVALUATION Derli Amaral, Jose' L. Lage pages 1309-1315 DOI: 10.1615/TFEC2018.tfh.021094

Heat/Mass Transfer at High Temperatures

COVECTION HEAT TRANSFER PERFORMANCE OF SOLAR SALT WITH A HIGH MELTING-POINT IN A CIRCULAR TUBE Xinyu DONG, Qincheng Bi, Yan Yao, Yajun Guo pages 1317-1320 DOI: 10.1615/TFEC2018.htt.021883
Evaluation of Wear Damage During a High Speed Scenario Lt Col Armando DeLeon, Dr. William P. Baker, Anthony N. Palazotto pages 1321-1340 DOI: 10.1615/TFEC2018.htt.021830

Heat/Mass Transfer Enhancement Techniques

COIL HEAT EXCHANGER WITH REVERSED LOOPS Yi Wang, Jorge L. Alvarado, Wilson Terrell pages 1341-1344 DOI: 10.1615/TFEC2018.hte.021622
THE EFFECTS OF COVERAGE AREA ON THE SPRAY COOLING HEAT TRANSFER PERFORMANCE Azzam S. Salman, Titan C. Paul, Jamil A. Khan pages 1345-1353 DOI: 10.1615/TFEC2018.hte.021183
EXPERIMENTAL INVESTIGATION OF THE PERFORMANCE OF REFRIGERANT R134A WORKING IN A SPRAY COOLING Nabeel M. Abdulrazzaq, Noble C. Anumbe, Jamil A. Khan pages 1355-1368 DOI: 10.1615/TFEC2018.hte.021658
Experimental Study of a Latent Storage System using a Vertical-Finned Tube and Shell Heat Exchanger: Early Results Florent Herbinger, Jonas Skaalum, Dominic Groulx pages 1369-1372 DOI: 10.1615/TFEC2018.hte.022887
FLEXIBLE POLYMERIC HOLLOW FIBER HEAT EXCHANGERS Tereza Brozova, Miroslav Raudensky, Ilya Astrouski pages 1373-1382 DOI: 10.1615/TFEC2018.hte.020837
MAGNETIC FIELD AND HEAT TRANSFER ANALYSIS OF HALBACH MAGNET ARRAYS FOR USE IN MAGNETIC REFRIGERATION SYSTEMS Erim Yanik, Abdullatif Hamad, Serdar Celik pages 1383-1396 DOI: 10.1615/TFEC2018.hte.021626
OPTIMIZING MECHANICAL EFFICIENCY OF CONICAL COIL HEAT EXCHANGER USING THERMOELECTRIC GENERATION Daniel Z. Newton, Aneesha Gogineni pages 1397-1404 DOI: 10.1615/TFEC2018.hte.021536
TAB-INDUCED COUNTER-ROTATING VORTEX PAIRS FOR MIXING AND HEAT TRANSFER APPLICATIONS Jeongmoon Park, Jorge L. Alvarado, Leonardo P. Chamorro, Charles P. Marsh pages 1405-1408 DOI: 10.1615/TFEC2018.hte.021621
THEORETICAL ANALYSIS OF COMBINED COMPACT EVAPORATIVE COOLER Laith Ismael, Hongbin Ma, Amged Al Ezzi pages 1409-1423 DOI: 10.1615/TFEC2018.hte.021631
THERMOHYDRAULIC CHARACTERISTICS OF A KNURLED MICROCHANNEL HEAT SINK IN SINGLE PHASE REGIME Saad K Oudah, Amitav Tikadar, Ruixian Fang, Karim Egab, Jamil A. Khan pages 1425-1436 DOI: 10.1615/TFEC2018.hte.021674
TRANSPORT ENEHANCEMENT IN A CHANNEL WITH MUTIPLE TRIANGULAR PRISMS Himadri Chattopadhyay, Suvanjan Bhattacharya, S Show pages 1437-1448 DOI: 10.1615/TFEC2018.hte.021581

Heat/Mass Transfer in Compact Heat Exchangers

AN ANALYTICAL MODEL FOR HEAT AND MASS TRANSFER PROCESSES IN NEW HYBRID INDIRECT/DIRECT EVAPORATIVE COOLER CONCEPT WITH PARALLEL FLOW CONFIGURATION Amged Al Ezzi, Hongbin Ma, Laith Ismael pages 1449-1464 DOI: 10.1615/TFEC2018.che.021866
CONSTRUCTAL OPTIMIZATION FOR DISC-SHAPED HEAT EXCHANGER BASED ON THERMAL EFFICIENCY MAXIMIZATION Huijun Feng, Lingen Chen, Shaojun Xia pages 1465-1475 DOI: 10.1615/TFEC2018.che.020743
EMPIRICAL NUSSELT NUMBER CORRELATION FOR SINGLE PHASE FLOW THROUGH CORRUGATED PLATE HEAT EXCHANGER Zeeshan Haider, Ahmad Abbas, Jr., Javed Ahmad, Hamza Ikram, Shahid Ali Khan, Rohaan Mehmood pages 1477-1487 DOI: 10.1615/TFEC2018.che.022154
EFFECT OF FLOW MALDISTRIBUTION ON THE PERFORMANCE OF ROTARY REGENERATORS Sukrut P. Phansalkar, P. K. Das pages 1489-1497 DOI: 10.1615/TFEC2018.che.021500
FLOW BOILING HEAT TRANSFER AND FLOW DISTRIBUTION IN NON-UNIFORMLY HEATED PARALLEL MINI-CHANNELS Kizuku Kurose, Kazushi Miyata, Yoshinori Hamamoto, Hideo Mori pages 1499-1502 DOI: 10.1615/TFEC2018.che.021663
THE EFFECT OF FIN PITCH ON A CROSS-CUT FLOW CONTROL IN WAVY FIN HEAT EXCHANGERS Gun Woo Kim, Jinsoo Park, Sarng Woo Karng, Myung-Do Oh, Gwang Hoon Rhee pages 1503-1505 DOI: 10.1615/TFEC2018.che.021636

Heat/Mass Transfer in Porous Media

DEVELOPMENT AND DEMONSTRATION OF A MODELLING PROCEDURE FOR PCM BASED PACKED BED HEAT EXHANGERS Brian F. Schwartz, Michael Ellis pages 1507-1513 DOI: 10.1615/TFEC2018.prm.020804
EFFECT OF VOLUME OF EVAPORATOR AND BED HEAT EXCHANGER ON PERFORMANCE OF ADSORPTION CHILLER Gamze Gediz Ilis, Hasan Demir pages 1515-1522 DOI: 10.1615/TFEC2018.prm.022042
EVAPORATION OF WATER AND N-HEPTANE DROPLETS ON HOT, POROUS, STAINLESS STEEL SURFACES Nick Lipson, Sanjeev Chandra pages 1523-1534 DOI: 10.1615/TFEC2018.prm.020801
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF A NEW SILICA-GEL/WATER PACKED BED FOR ADSORPTION COOLING APPLICATIONS Ramy H. Mohammed, Osama Mesalhy, Mohamed L. Elsayed, Louis C. Chow pages 1535-1546 DOI: 10.1615/TFEC2018.prm.021615
EXPERIMENTAL AND NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT IN A PIPE PARTIALLY OR TOTALLY FILLED WITH A POROUS MATERIAL Mahboobe Mahdavi, Saeed Tiari, Ali Heidari, Majid Saffar Avval pages 1547-1551 DOI: 10.1615/TFEC2018.prm.022071
EXPERIMENTAL STUDY OF FORCED CONVECTIVE HEAT TRANSFER IN COMPOSITE PACKED BEDS OF SPHERES Y.X. Hu, Pei Qian, Z.G. Guo, Jian Yang, Qiuwang Wang pages 1553-1561 DOI: 10.1615/TFEC2018.prm.020859
HIGH-FIDELITY VELOCITY MEASUREMENTS IN A MATCHED REFRACTIVE INDEX FACILITY OF RANDOMLY PACKED SPHERES E. Kappes, Mateusz Marciniak, S. King, Thien D. Nguyen, Yassin A. Hassan, V. Ugaz pages 1563-1566 DOI: 10.1615/TFEC2018.prm.021668
THERMAL CONDUCTIVITY MEASUREMENTS OF CERAMIC FIBER INSULATION MATERIALS Alexander Headley, Michael Hileman, Aron Robbins, Christine Roberts pages 1567-1574 DOI: 10.1615/TFEC2018.prm.020830

Heat/Mass Transfer in Renewable and Clean Energy Systems

A NUMERICAL STUDY FOR APPROXIMATING CELLS TEMPERATURE INSIDE A PV MODULE Shahzada Pamir Aly, Nicolas Barth, Said Ahzi pages 1575-1584 DOI: 10.1615/TFEC2018.rce.022023
COMPARISON OF AN ADIABATIC AND DIABATIC ABSORPTION SYSTEM WORKING WITH AMMONIA-LITHIUM NITRATE AND WATER-LITHIUM BROMIDE AS WORKING FLUIDS J. A. Quiroz, Alejandro Zacarias, Geydy Luz Gutiérrez-Urueta, Ignacio Carvajal pages 1585-1589 DOI: 10.1615/TFEC2018.rce.022300
NUMERICAL MODELING AND PERFORMANCE EVALUATION OF MULTI-PASS SOLAR AIR HEATER Soheil Soleimanikutanei, Long Phan, E. J. Lee, Cheng-Xian Lin pages 1591-1598 DOI: 10.1615/TFEC2018.rce.021522

Micro/Nano Heat/Mass Transfer

A MOLECULAR DYNAMIC STUDY OF BOILING ON A NANO DOT DECORATED SOLID SURFACE Md. Ferdous Alam, Muhammad Rubayat Bin Shahadat, AKM M. Morshed, Titan C. Paul pages 1599-1608 DOI: 10.1615/TFEC2018.mnh.021567
A STUDY ON THERMAL CONDUCTIVITY AND FLOW OF COPPERARGON NANOFLUIDS IN MICROCHANNEL Lei Chen, Kun Wang, Shan-You Wang, Yi-Nan Nie, Gui-Hua Tang, Wen-Quan Tao pages 1609-1616 DOI: 10.1615/TFEC2018.mnh.022044
CHARACTERIZATION AND HEAT TRANSFER ANALYSIS OF DIAMOND NANOFLUIDS Farzin Mashali, Ethan Languri, Jim Davidson, David Kerns, Wayne Johnson, Roya Eatebarian pages 1617-1621 DOI: 10.1615/TFEC2018.mnh.024266
EFFECT OF SLIP ON FRICTION NUMBER FOR WATER FLOW IN MICROCHANNELS Mohamed S. El-Genk, Mahyar Pourghasemi pages 1623-1626 DOI: 10.1615/TFEC2018.mnh.022272
NANOFLUID HEAT TRANSFER COEFFICIENT ENHANCEMENT IN MICROCHANNELS Saeid Vafaei, Sarah Simpson pages 1627-1640 DOI: 10.1615/TFEC2018.mnh.020658
NUMERICAL INVESTIGATION OF DUAL HIGH HEAT FLUX THERMAL MANAGEMENT FOR A PHASED ARRAY ANTENNA WITH MICROCHANNEL COOLING TECHNIQUES M. Parlak, E. Örs, H. H Kılıç pages 1641-1654 DOI: 10.1615/TFEC2018.mnh.022343
SINTERING EFFECTS OF BUNDLE-SHAPED TITANIUM OXIDE NANOFLUIDS ON THE PERFORMANCE OF DYE-SENSITIZED SOLAR CELLS Saeid Vafaei, Kazuhiro Manseki, Naoya Ikuta, Kaori Kimura, Takashi Sugiura pages 1655-1660 DOI: 10.1615/TFEC2018.mnh.020789
THERMOSYPHON PERFORMANCE IN DEPENDENCE OF CARBON-BASED NANOFLUIDS Agnieszka Wlazlak, B. Zajaczkowski , M. Woluntarski , Matthias H. Buschmann pages 1661-1665 DOI: 10.1615/TFEC2018.mnh.021951

Multiphase Flow

ANALYSIS OF LIQUID-GAS TWO-PHASE FLOW PRESSURE DROP SIGNATURE IN MINICHANNELS Mehdi Mortazavi, Seyed A. Niknam pages 1667-1680 DOI: 10.1615/TFEC2018.mph.021681
CAVITATING BUBBLY FLOW COMPUTATIONS BY MEANS OF MIXTURE BALANCE EQUATIONS Dia Zeidan, Lucy T. Zhang, Eric Goncalves pages 1681-1687 DOI: 10.1615/TFEC2018.mph.021541
EXPERIMENTAL INVESTIGATION ON PRESSURE OSCILLATIONS CAUSED BY CONDENSATION INDUCED WATER HAMMER IN A HORIZONTAL PIPE Lutao Wang, Xiaoyu Yue, Daotong Chong, Weixiong Chen, Junjie Yan pages 1689-1692 DOI: 10.1615/TFEC2018.mph.020942
Experimental study on condensate droplets movements in Marangoni condensation of ethanol-water mixture vapors on a horizontal surface Jinshi Wang, Guangyao Liu, Yong Li, Nana Chen, Junjie Yan pages 1693-1696 DOI: 10.1615/TFEC2018.mph.021645
LIQUID PLUG IN GAS FLOWIN ANNULAR CHANNEL Yadi Cao, Ri Li pages 1697-1706 DOI: 10.1615/TFEC2018.mph.024337
NUMERICAL PREDICTION OF LIQUID FILM FLOW CHARACTERISTICS OF COLUMN FLOW OUTSIDE HORISONTAL TUBE Qinggang Qiu, Chuiju Meng, Xiaojing Zhu, Shenglin Quan, Shengqiang Shen pages 1707-1715 DOI: 10.1615/TFEC2018.mph.022291
POOL BOILING OF SATURATED FC-72 USING SPHERICAL HOLLOW STRUCTURES FABRICATED BY SELECTIVE LASER MELTING Kin Keong Wong, Kai Choong Leong pages 1717-1726 DOI: 10.1615/TFEC2018.mph.021579
Research on Characteristics of Pressure Oscillation Amplitude due to Double- Hole Steam Jet Submerged in Subcooled Water Weixiong Chen, Chenxi Huang, Yingchun Wang, Lutao Wang, Daotong Chong, Junjie Yan pages 1727-1733 DOI: 10.1615/TFEC2018.mph.020939
THEORETICAL DAMPED OSCILLATING MODEL OF SEGMENT SPHERICAL DROPLET ON THE SOLID FLAT Shi Chen, Dongqi Zhang, Xiaohua Liu, Shengqiang Shen, Yaqiong Chen pages 1735-1746 DOI: 10.1615/TFEC2018.mph.020965

Natural and Built Environments

ENERGY SAVING ANALYSIS OF A METAMATERIAL BASED RADIATIVE COOLING SYSTEM FOR LOW-RISE RESIDENTIAL BUILDINGS BY INTEGRATING WITH RADIANT FLOOR Jinchao Yuan, Kai Zhang, Dongliang Zhao, Xiaobo Yin, Ronggui Yang, Gang Tan pages 1747-1750 DOI: 10.1615/TFEC2018.nbe.022313
NUMERICAL STUDY ON COMBINED EFFECT OF SOLAR CHIMNEY AND EARTH COOLING FOR BUILDING VENTILATION Md Sajjadul Alam, Xianchang Li pages 1751-1762 DOI: 10.1615/TFEC2018.nbe.022326

Radiative Heat Transfer

AN APPLICATION OF THE MONTE CARLO RAY-TRACE METHOD WITH BIDIRECTIONAL REFLECTION J. Robert Mahan, N. Q. Vinh, Kory J. Priestley pages 1763-1773 DOI: 10.1615/TFEC2018.rad.022038
APPLICATION OF LIE-GROUP SHOOTING METHOD TO ESTIMATE NONHOMOGENEOUS THERMAL CONDUCTIVITY AND ABSORPTION COEFFICIENT Mingjian He, Hong Qi, Ya-Tao Ren, Liming Ruan pages 1775-1784 DOI: 10.1615/TFEC2018.rad.021280

Technoeconomic Analysis of Energy Systems

A COMPARATIVE TECHNO- ECONOMIC ANALYSIS OF CYANOBACTERIAL AND CELLULOSIC ETHANOL Nawa Raj Baral, Carlos Quiroz Arita, Thomas H. Bradley pages 1785-1792 DOI: 10.1615/TFEC2018.tcn.022089
CASCADED THERMOELECTRIC GENERATION AND ABSORPTION REFRIGERATION WASTE HEAT RECOVERY Shahzaib B Abbasi, Alexander S. Rattner pages 1793-1797 DOI: 10.1615/TFEC2018.tcn.022007
DETERMINING THE APPARENT COST OF WATER FOR THERMOELECTRIC POWER PLANTS Achyut Paudel, Joshua Richey, Jason Quinn, Todd M. Bandhauer pages 1799-1802 DOI: 10.1615/TFEC2018.tcn.021609
TECHNOECONOMIC STUDY OF WASTE HEAT RECOVERY STRATEGIES FOR NATURAL GAS COMBINED CYCLE POWER PLANTS Achyut Paudel, Todd M. Bandhauer pages 1803-1806 DOI: 10.1615/TFEC2018.tcn.021619
Effects of Evaporative Cooling on the Performance of Dry-Cooled Natural-Gas Combined-Cycle (NGCC) Power Plants Tao He, Wei Zhong, Sotirios Mamalis, Yaroslav Chudnovsky, Jon P. Longtin pages 1807-1819 DOI: 10.1615/TFEC2018.tcn.021767
WORKING FLUID SELECTION AND TECHNOECONOMIC OPTIMIZATION OF TURBOCOMPRESSION COOLING SYSTEMS Derek N. Young, Todd M. Bandhauer pages 1821-1824 DOI: 10.1615/TFEC2018.tcn.021605

Thermo-Fluid Field General Aspects

AXIAL SOLID TRANSPORT IN ROTARY KILNS − INFLUENCE OF OPERATIONAL PARAMETERS Haozhi Jie, Fabian Herz pages 1825-1834 DOI: 10.1615/TFEC2018.tff.020961
DEVELOPMENT OF ACTIVE FLOWCONTROL FOR TRUCKS Guglielmo Minelli, E. Adi Hartono, Valery G. Chernoray, L. Hjelm, Branislav Basara, Sinisa Krajnovic pages 1835-1843 DOI: 10.1615/TFEC2018.tff.021216
IMPROVING INTERNATIONAL LEVEL OF ENGINEERING STUDENTS’ EDUCATION IN ENERGY RELATED MAJORS IN CHINA: SOME PRACTICES AND CHALLENGES Yanan Yue, Danmei Xie, Yangheng Xiong pages 1845-1848 DOI: 10.1615/TFEC2018.tff.022278

Turbulent Flows

DIRECT NUMERICAL SIMULATION ON TURBULENT FLOW OVER TRUNCATED PYRAMID IN AN OPEN CHANNEL Mitsuhiro Shintani, K. Nakatsuji, M. Matsumoto, Yoshimichi Hagiwara pages 1849-1858 DOI: 10.1615/TFEC2018.tfl.022349
NUMERICAL INVESTIGATION OF THREE-DIMENSIONAL FLUID STRUCTURES IN THE WAKE OF AN INFINITELY LONG INCLINED FLAT PLATE Kohei Fukuda, Ram Balachandar, Ron M. Barron pages 1859-1864 DOI: 10.1615/TFEC2018.tfl.021718
Verification of Turbulence Models for Flow in a Constricted Pipe at Low Reynolds Number Fardin Khalili, Peshala P. T Gamage, Hansen A Mansy pages 1865-1874 DOI: 10.1615/TFEC2018.tfl.021662

Wind Turbines Aerodynamics and Control

NUMERICAL STUDY ON FLOW PERFORMANCE OF DELAYING AIRFOILSTALL WITH INTERNAL SLOTS Pu Xing, Xukun Zhang, Tsung-chow Su pages 1875-1888 DOI: 10.1615/TFEC2018.wta.021707
Главная Архив Оргкомитет Будущие конференции American Society of Thermal and Fluids Engineering Русский English 中文 Português Помощь Контакты Назад в ASTFE